Metallic hydrogen

Metallic hydrogen
A diagram showing the insides of the gas planets
Some gas giants have metallic hydrogen in their centers

Metallic hydrogen is a state of hydrogen which results when it is sufficiently compressed and undergoes a phase transition; it is an example of degenerate matter. Solid metallic hydrogen is predicted to consist of a crystal lattice of hydrogen nuclei (namely, protons), with a spacing which is significantly smaller than the Bohr radius. Indeed, the spacing is more comparable with the de Broglie wavelength of the electron. The electrons are unbound and behave like the conduction electrons in a metal. In liquid metallic hydrogen, protons do not have lattice ordering; rather, it is a liquid system of protons and electrons.

Contents

History

Theoretical predictions

Metallization of hydrogen under pressure

Though at the top of the alkali metal column in the periodic table, hydrogen is not, under ordinary conditions, an alkali metal. In 1935 however, physicists Eugene Wigner and Hillard Bell Huntington predicted that under an immense pressure of ~25 GPa (250,000 atm or 3,500,000 psi), hydrogen atoms would display metallic properties, losing hold over their electrons.[1] Since then, metallic hydrogen has been described as "the holy grail of high-pressure physics".[2]

The initial prediction about the amount of pressure needed was eventually proven to be too low.[3] Since the first work by Wigner and Huntington the more modern theoretical calculations were pointing toward higher but nonetheless potentially accessible metallization pressures. Techniques are being developed for creating pressures of up to 500 GPa, higher than the pressure at the center of the Earth, in hopes of creating metallic hydrogen.[4]

Liquid metallic hydrogen

Helium-4 is a liquid at normal pressure and temperatures near absolute zero, a consequence of its high zero-point energy (ZPE). The ZPE of protons in a dense state is also high, and a decline in the ordering energy (relative to the ZPE) is expected at high pressures. Arguments have been advanced by Neil Ashcroft and others that there is a melting point maximum in compressed hydrogen, but also that there may be a range of densities (at pressures around 400 GPa) where hydrogen may be a liquid metal, even at low temperatures.[5][6]

Superconductivity

In 1968, Ashcroft put forward that metallic hydrogen may be a superconductor, up to room temperature (~290 K), far higher than any other known candidate material. This stems from its extremely high speed of sound and the expected strong coupling between the conduction electrons and the lattice vibrations.[7]

Possibility of novel types of quantum fluid

Presently known "super" states of matter are superconductors, superfluid liquids and gases, and supersolids. Egor Babaev predicted that if hydrogen and deuterium have liquid metallic states, they may have ordered states in quantum domains which cannot be classified as superconducting or superfluid in the usual sense. Instead, they may represent two possible novel types of quantum fluids: "superconducting superfluids" and "metallic superfluids". Such fluids were predicted to have highly unusual reactions to external magnetic fields and rotations, which might provide a means for experimental verification of Babaev's predictions. It has also been suggested that, under the influence of magnetic field, hydrogen may exhibit phase transitions from superconductivity to superfluidity and vice-versa.[8][9][10]

Lithium doping reduces requisite pressure

In 2009, Zurek et al. predicted that the alloy LiH6 would be a stable metal at only 14 of the pressure required to metallize hydrogen, and that similar effects should hold for alloys of type LiHn and possibly other alloys of type ?Lin.[11]

Experimental pursuit before 2011

Metallization of hydrogen in shock-wave compression

In March 1996, a group of scientists at Lawrence Livermore National Laboratory reported that they had serendipitously produced, for about a microsecond and at temperatures of thousands of kelvins and pressures of over a million atmospheres (>100 GPa), the first identifiably metallic hydrogen.[12] The team did not expect to produce metallic hydrogen, as it was not using solid hydrogen, thought to be necessary, and was working at temperatures above those specified by metallization theory. Previous studies in which solid hydrogen was compressed inside diamond anvils to pressures of up to 2,500,000 atm (250 GPa), did not confirm detectable metallization. The team had sought simply to measure the less extreme electrical conductivity changes which were expected to occur. The researchers used a 1960s-era light gas gun, originally employed in guided missile studies, to shoot an impactor plate into a sealed container containing a half-millimeter thick sample of liquid hydrogen. The liquid hydrogen was in contact with wires leading to a device measuring electrical resistance. The scientists found that, as pressure rose to 1,400,000 atm (140 GPa), the electronic energy band gap, a measure of electrical resistance, fell to almost zero. The band-gap of hydrogen in its uncompressed state is about 15 eV, making it an insulator but, as the pressure increases significantly, the band-gap gradually fell to 0.3 eV. Because the thermal energy of the fluid (the temperature became about 3,000 K due to compression of the sample) was above 0.3 eV, the hydrogen might be considered metallic.

Other experimental research since 1996

Many experiments are continuing in the production of metallic hydrogen in laboratory conditions at static compression and low temperature. Arthur Ruoff and Chandrabhas Narayana from Cornell University in 1998,[13] and later Paul Loubeyre and René LeToullec from Commissariat à l'Énergie Atomique, France in 2002, have shown that at pressures close to those at the center of the Earth (3.2 to 3.4 million atmospheres or 324 to 345 GPa) and temperatures of 100–300 K, hydrogen is still not a true alkali metal, because of the non-zero band gap. The quest to see metallic hydrogen in laboratory at low temperature and static compression continues. Studies are also undergoing on deuterium.[14] Shahriar Badiei and Leif Holmlid from the University of Gothenburg have shown in 2004 that condensed metallic states made of excited hydrogen atoms (Rydberg matter) are effective promoters to metallic hydrogen.[15]

Experimental results in 2008

The theoretically predicted maximum of the melting curve (the prerequisite for the liquid metallic hydrogen) was discovered by Shanti Deemyad and Isaac F. Silvera by using pulsed laser heating.[16] Hydrogen-rich alloy SiH4 was metalized and found to be superconducting by M.I. Eremets et al., confirming earlier theoretical prediction by Ashcroft.[17] In this hydrogen rich alloy, even at moderate pressures (because of chemical precompression) the hydrogen forms a sub-lattice with density corresponding to metallic hydrogen. However, the claimed high-pressure metallic and superconducting phase of SiH4 was later identified as platinum hydride, that formed after the decomposition of SiH4.[18]

Metallization of hydrogen in 2011

In 2011 Eremets and Tojan reported observing the liquid metallic state of hydrogen and deuterium at static pressures. [19]

Metallic hydrogen in other contexts

Astrophysics

Metallic hydrogen is thought to be present in large amounts in the gravitationally compressed interiors of Jupiter, Saturn, and some of the newly discovered extrasolar planets. Because previous predictions of the nature of those interiors had taken for granted metallization at a higher pressure than the one at which we now know it to happen, those predictions must now be adjusted. The new data indicate much more metallic hydrogen must exist inside Jupiter than previously thought, that it comes closer to the surface, and that therefore, Jupiter's tremendous magnetic field, the strongest of any planet in the solar system is, in turn, produced closer to the surface.[citation needed]

Hydrogen permeation of metals

As mentioned earlier, pressurized SiH4 forms a metal alloy. It is well known that hydrogen can permeate to a remarkable extent various ordinary metals under conditions of ordinary pressure. In some metals (e.g., lithium) a chemical reaction occurs that produces an ordinary non-metallic chemical compound (lithium hydride). In other cases it is possible that the hydrogen literally alloys itself with the metal (somewhat analogous to mercury amalgam formation). Certainly it is known that many metals remain metallic (e.g., palladium) after absorbing hydrogen—most become brittle, but many ordinary alloys are brittle, too.

Applications

Nuclear power

One method of producing nuclear fusion, called inertial confinement fusion, involves aiming laser beams at pellets of hydrogen isotopes. The increased understanding of the behavior of hydrogen in extreme conditions could help to increase energy yields.[citation needed]

Fuel

It may be possible to produce substantial quantities of metallic hydrogen for practical purposes.[citation needed] The existence has been theorized[citation needed] of a form called "Metastable Metallic Hydrogen" (MSMH), which would not immediately revert to ordinary hydrogen upon release of pressure.[citation needed]

In addition, MSMH would make an efficient fuel and also a clean one, with only water as an end product[citation needed] (if burned in pure oxygen). Nine times as dense as standard hydrogen, it would give off considerable energy when reverting to standard hydrogen. Burned more quickly, it could be a propellant with up to five times the efficiency of liquid H2/O2, the current Space Shuttle fuel.[20] Unfortunately, the above-mentioned Lawrence Livermore experiments produced metallic hydrogen too briefly to determine whether metastability is possible.[21]

See also

References

  1. ^ Wigner, E.; Huntington, H.B. (1935). "On the possibility of a metallic modification of hydrogen". Journal of Chemical Physics 3 (12): 764. Bibcode 1935JChPh...3..764W. doi:10.1063/1.1749590. 
  2. ^ "High-pressure scientists 'journey' to the center of the Earth, but can't find elusive metallic hydrogen" (Press release). Cornell News. 6 May 1998. http://www.news.cornell.edu/releases/May98/misbehaving.hydrogen.deb.html. Retrieved 2010-01-02. 
  3. ^ Loubeyre, P.; et al. (1996). "X-ray diffraction and equation of state of hydrogen at megabar pressures". Nature 383 (6602): 702. Bibcode 1996Natur.383..702L. doi:10.1038/383702a0. 
  4. ^ "Peanut butter diamonds on display". BBC News. 27 June 2007. http://news.bbc.co.uk/2/hi/uk_news/scotland/edinburgh_and_east/6244778.stm. Retrieved 2010-01-02. 
  5. ^ Ashcroft, N.W. (2000). "The hydrogen liquids". Journal of Physics: Condensed Matter 12 (8A): A129. Bibcode 2000JPCM...12..129A. doi:10.1088/0953-8984/12/8A/314. 
  6. ^ Bonev, S.A.; et al. (2004). "A quantum fluid of metallic hydrogen suggested by first-principles calculations". Nature 431 (7009): 669. arXiv:cond-mat/0410425. Bibcode 2004Natur.431..669B. doi:10.1038/nature02968. 
  7. ^ Ashcroft, N.W. (1968). "Metallic Hydrogen: A High-Temperature Superconductor?". Physical Review Letters 21 (26): 1748. Bibcode 1968PhRvL..21.1748A. doi:10.1103/PhysRevLett.21.1748. 
  8. ^ Babaev, E.; Ashcroft, N.W. (2007). "Violation of the London law and Onsager–Feynman quantization in multicomponent superconductors". Nature Physics 3 (8): 530. Bibcode 2007NatPh...3..530B. doi:10.1038/nphys646. 
  9. ^ Babaev, E.; Sudbø, A.; Ashcroft, N.W. (2004). "A superconductor to superfluid phase transition in liquid metallic hydrogen". Nature 431 (7009): 666. arXiv:cond-mat/0410408. Bibcode 2004Natur.431..666B. doi:10.1038/nature02910. 
  10. ^ Babaev, Egor; E. (2002). "Vortices with fractional flux in two-gap superconductors and in extended Faddeev model". Physical Review Letters 89 (6): 067001. arXiv:cond-mat/0111192. Bibcode 2002PhRvL..89f7001B. doi:10.1103/PhysRevLett.89.067001. PMID 12190602. 
  11. ^ Zurek, E.; et al. (2009). "A little bit of lithium does a lot for hydrogen". Proceedings of the National Academy of Sciences 106 (42): 17640–3. Bibcode 2009PNAS..10617640Z. doi:10.1073/pnas.0908262106. PMC 2764941. PMID 19805046. http://www.pubmedcentral.nih.gov/articlerender.fcgi?tool=pmcentrez&artid=2764941. 
  12. ^ Weir, S.T.; Mitchell, A.C.; Nellis, W. J. (1996). "Metallization of fluid molecular hydrogen at 140 GPa (1.4 Mbar)". Physical Review Letters 76 (11): 1860. Bibcode 1996PhRvL..76.1860W. doi:10.1103/PhysRevLett.76.1860. 
  13. ^ Ruoff, A.L.; et al. (1998). "Solid hydrogen at 342 GPa: No evidence for an alkali metal". Nature 393 (6680): 46. Bibcode 1998Natur.393...46N. doi:10.1038/29949. 
  14. ^ Baer, B.J.; Evans, W.J.; Yoo, C.-S. (2007). "Coherent anti-Stokes Raman spectroscopy of highly compressed solid deuterium at 300 K: Evidence for a new phase and implications for the band gap". Physical Review Letters 98 (23): 235503. Bibcode 2007PhRvL..98w5503B. doi:10.1103/PhysRevLett.98.235503. 
  15. ^ Badiei, S.; Holmlid, L. (2004). "Experimental observation of an atomic hydrogen material with H–H bond distance of 150 pm suggesting metallic hydrogen". Journal of Physics: Condensed Matter 16 (39): 7017. Bibcode 2004JPCM...16.7017B. doi:10.1088/0953-8984/16/39/034. 
  16. ^ Deemyad, S.; Silvera, I.F (March 2008). "The melting line of hydrogen at high pressures". Physical Review Letters 100 (15). arXiv:0803.2321. Bibcode 2008PhRvL.100o5701D. doi:10.1103/PhysRevLett.100.155701. 
  17. ^ Eremets, M.I.; et al. (2008). "Superconductivity in hydrogen dominant materials: Silane". Science 319 (5869): 1506–9. Bibcode 2008Sci...319.1506E. doi:10.1126/science.1153282. PMID 18339933. 
  18. ^ Degtyareva, O.; et al. (July 2009). "Formation of transition metal hydrides at high pressures". Solid State Communications 149 (39-40). arXiv:0907.2128v1. Bibcode 2009SSCom.149.1583D. doi:10.1016/j.ssc.2009.07.022. 
  19. ^ Eremets, M.I.; Troyan, I.A. (2011). "Conductive dense hydrogen". Nature Materials. doi:10.1038/nmat3175. 
  20. ^ Cole, J.W.; Silvera, Isaac F.; Robertson, Glen A. (2009). "Metallic Hydrogen Propelled Launch Vehicles for Lunar Missions". AIP Conference Proceedings 1103: 117. doi:10.1063/1.3115485. http://link.aip.org/link/?APCPCS/1103/117/1. 
  21. ^ Nellis, W.J. (2001). "Metastable Metallic Hydrogen Glass". Lawrence Livermore Preprint UCRL-JC-142360. OSTI 15005772. http://www.llnl.gov/tid/lof/documents/pdf/244531.pdf 

Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Hydrogen safety — covers the safe use and handling of hydrogen. Hydrogen poses unique challenges due to its ease of leaking, low energy ignition, wide range of combustible fuel air mixtures, buoyancy, and its ability to embrittle metals that must be accounted for… …   Wikipedia

  • Hydrogen — This article is about the chemistry of hydrogen. For the physics of atomic hydrogen, see Hydrogen atom. For other meanings, see Hydrogen (disambiguation). ← hydrogen → helium …   Wikipedia

  • Metallic bond — Metallic bonding is the electrostatic attractive forces between the delocalized electrons, called conduction electrons, gathered in an electron sea , and the positively charged metal ions. Understood as the sharing of free electrons among a… …   Wikipedia

  • Hydrogen embrittlement — (or hydrogen grooving) is the process by which various metals, most importantly high strength steel, become brittle and crack following exposure to hydrogen. Hydrogen cracking can pose an engineering problem especially in the context of a… …   Wikipedia

  • Hydrogen — Hy dro*gen, n. [Hydro , 1 + gen: cf. F. hydrog[ e]ne. So called because water is generated by its combustion. See {Hydra}.] (Chem.) A gaseous element, colorless, tasteless, and odorless, the lightest known substance, being fourteen and a half… …   The Collaborative International Dictionary of English

  • Hydrogen dioxide — Hydrogen Hy dro*gen, n. [Hydro , 1 + gen: cf. F. hydrog[ e]ne. So called because water is generated by its combustion. See {Hydra}.] (Chem.) A gaseous element, colorless, tasteless, and odorless, the lightest known substance, being fourteen and a …   The Collaborative International Dictionary of English

  • Hydrogen oxide — Hydrogen Hy dro*gen, n. [Hydro , 1 + gen: cf. F. hydrog[ e]ne. So called because water is generated by its combustion. See {Hydra}.] (Chem.) A gaseous element, colorless, tasteless, and odorless, the lightest known substance, being fourteen and a …   The Collaborative International Dictionary of English

  • Hydrogen sulphide — Hydrogen Hy dro*gen, n. [Hydro , 1 + gen: cf. F. hydrog[ e]ne. So called because water is generated by its combustion. See {Hydra}.] (Chem.) A gaseous element, colorless, tasteless, and odorless, the lightest known substance, being fourteen and a …   The Collaborative International Dictionary of English

  • Hydrogen sulfide — Systematic name …   Wikipedia

  • Hydrogen damage — is the generic name given to a large number of metal degradation processes due to interaction with hydrogen.Hydrogen is present practically everywhere, in the atmosphere, several kilometres above the earth and inside the earth. Engineering… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”