# Depth of focus

﻿
Depth of focus

Depth of focus is a lens optics concept that measures the tolerance of placement of the image plane (the film plane in a camera) in relation to the lens. In a camera, depth of focus indicates the tolerance of the film's displacement within the camera, and is therefore sometimes referred to as "lens-to-film tolerance."

## Depth of focus vs depth of field

While the phrase depth of focus was historically used, and is sometimes still used, to mean depth of field, in modern times it is more often reserved for the image-side depth.

Depth of field is the range of distances in object space for which object points are imaged with acceptable sharpness with a fixed position of the image plane (the plane of the film or electronic sensor). Depth of focus can have two slightly different meanings. The first is the distance over which the image plane can be displaced while a single object plane remains in acceptably sharp focus;[1][2] the second is the image-side conjugate of depth of field.[2] With the first meaning, the depth of focus is symmetrical about the image plane; with the second, the depth of focus is greater on the far side of the image plane, though in most cases the distances are approximately equal.

Where depth of field often can be measured in macroscopic units such as meters and feet, depth of focus is typically measured in microscopic units such as fractions of a millimeter or thousandths of an inch.

The same factors that determine depth of field also determine depth of focus, but these factors can have different effects than they have in depth of field. Both depth of field and depth of focus increase with smaller apertures. For distant subjects (beyond macro range), depth of focus is relatively insensitive to focal length and subject distance, for a fixed f-number. In the macro region, depth of focus increases with longer focal length or closer subject distance, while depth of field decreases.

## Determining factors

In small-format cameras, the smaller circle of confusion limit yields a proportionately smaller depth of focus. In motion picture cameras, different lens mount and camera gate combinations have exact flange focal depth measurements to which lenses are calibrated.

The choice to place gels or other filters behind the lens becomes a much more critical decision when dealing with smaller formats. Placement of items behind the lens will alter the optics pathway, shifting the focal plane. Therefore, often this insertion must be done in concert with stopping down the lens in order to compensate enough to make any shift negligible given a greater depth of focus. It is often advised in 35 mm motion picture filming not to use filters behind the lens if the lens is wider than 25 mm.

## Calculation

When the depth of focus relates to a single plane in object space, it can be calculated from[1]

$t = 2Nc \frac {v} {f} \,,$

where t is the total depth of focus, N is the lens f-number, c is the circle of confusion, v is the image distance, and f is the lens focal length. In most cases, the image distance is not easily determined; the depth of focus can also be given in terms of magnification m:

$t = 2Nc \left ( 1 + m \right ) \,.$

The magnification depends on the focal length and the subject distance, and sometimes it can be difficult to estimate. When the magnification is small, the formula simplifies to

$t \approx 2Nc \,.$

The simple formula is often used as a guideline, as it is much easier to calculate, and in many cases, the difference from the exact formula is insignificant. Moreover, the simple formula will always err on the conservative side (i.e., depth of focus will always be greater than calculated).

Following historical convention, the circle of confusion is sometimes taken as the lens focal length divided by 1000 (with the result in same units as the focal length);[3][4] this formula makes most sense in the case of normal lens (as opposed to wide-angle or telephoto), where the focal length is a representation of the format size. This practice is now deprecated; it is more common to base the circle of confusion on the format size (for example, the diagonal divided by 1000 or 1500).[4]

In astronomy, the depth of focus Δf  is the amount of defocus that introduces a $\pm \lambda/4$ wavefront error, and can be calculated using[5][6]

$\Delta f = \pm 2 \lambda N^2$.

## References

1. ^ a b Larmore 1965, p. 167.
2. ^ a b Ray 2000, p. 56.
3. ^ Larmore 1965, p. 163.
4. ^ a b Ray 2000, p. 53.
5. ^ McLean 2008, p. 238.
6. ^ Lipson, Lipson, and Lipson 2010.
• Hart, Douglas C. 1996. The Camera Assistant: A Complete Professional Handbook. Newton, MA: Focal Press. ISBN 0240800427
• Hummel, Rob (editor). 2001. American Cinematographer Manual, 8th edition. Hollywood: ASC Press. ISBN 0935578153
• Larmore, Lewis. 1965. Introduction to Photographic Principles. 2nd ed. New York: Dover Publications, Inc.
• Lipson, Stephen G., Ariel Lipson, and Henry Lipson. 2010. Optical Physics. 4th ed. Cambridge: Cambridge University Press. ISBN 9780521493451 (scheduled release October 2010)
• McLean, Ian S. (2008). Electronic Imaging in Astronomy: Detectors and Instrumentation (2nd ed.). Chichester, UK: Praxis Publishing Ltd. ISBN 3540765824.
• Ray, Sidney F. 2000. The geometry of image formation. In The Manual of Photography: Photographic and Digital Imaging, 9th ed. Ed. Ralph E. Jacobson, Sidney F. Ray, Geoffrey G. Atteridge, and Norman R. Axford. Oxford: Focal Press. ISBN 0-240-51574-9

Wikimedia Foundation. 2010.

### Look at other dictionaries:

• depth of focus — 1. : the range of distances of the image behind a camera lens or other image forming device measured along the axis of the device throughout which the image has acceptable sharpness 2. : depth of field not used technically * * * ˌdepth of ˈfield… …   Useful english dictionary

• depth of focus — ryškumo gylis statusas T sritis fizika atitikmenys: angl. depth of field; depth of focus; focal depth vok. Fokustiefe, f; Schärfentiefe, f; Tiefenschärfe, f rus. глубина резкости, f pranc. netteté en profondeur, f; profondeur de champ, f;… …   Fizikos terminų žodynas

• depth of focus —   related to depth of field refers to an adjustment made technically to insure that a camera shot retains its deep focus throughout all the various planes (fore, middle, and back)   Example: Citizen Kane (1941) has many examples of deep focus… …   Glossary of cinematic terms

• Depth of Focus — WikiV The range of sensor to lens distance for which the image formed by the lens is clearly focused …   Audio and video glossary

• Depth of focus (tectonics) — In seismology, the depth of focus refers to the depth at which an earthquake occurs. Earthquakes occurring at a depth of less than 60 km are classified as shallow focus earthquakes, while those with a focal depth between 60 and 300 km… …   Wikipedia

• Maximum resolving power and depth of focus for a visual microscope — ▪ Table Maximum resolving power and depth of focus for a visual microscope objective focal length (mm) numerical aperture (N.A.) maximum useful magnification in compound microscope maximum resolution on object (mm) objective depth of focus (mm)… …   Universalium

• depth of definition — depth of focus 1 …   Useful english dictionary

• Depth perception — is the visual ability to perceive the world in three dimensions (3D) and the distance of an object. Depth sensation is the ability to move accurately, or to respond consistently, based on the distances of objects in an environment.[citation… …   Wikipedia

• Depth of field — The area within the depth of field appears sharp, while the areas in front of and beyond the depth of field appear blurry …   Wikipedia

• depth of field — the range of distances of the object in front of a camera lens or other image forming device measured along the axis of the device throughout which the image has acceptable sharpness * * * Optics, Photog. the range of distances along the axis of… …   Useful english dictionary