12-metre class

12-metre class

The 12-metre class is a group of sailing vessels which, while not identical, are all designed to a particular formula, so as to make the boats involved in a competition roughly comparable, while still giving individuals the freedom to experiment with the details of their designs. The first 12-metres were built in 1907 and the last in 1987. The 12-metre class was used in the Olympic Games of 1908, 1912 and 1920 but are probably best known for their use from 1958 to 1987 in the America's Cup.

Rough equality between boats is ensured by requiring compliance with a formula that takes into account the length at the waterline, the girth (the measurement around the boat from one sideboard, under the keel and then back over the top on the opposite side back to the original side) and the sail area. The very carefully specified measurements are then entered into the formula, and the result must be 12 metres - hence the name of the class. Designers are free to change any of these variables (as well as other details, such as the size of the rudder and keel, etc), with the understanding that for any change in any of the measured attributes, something else will have to be adjusted, in order to make the formula produce the required value.

The "12-metre" in the class name does not refer to the actual length of the boats, which ranged from 65 to 75 feet (about 20 to 23 m) overall. They were all sloop-rigged, with their masts typically being about 85 feet (26 m) tall.

The Formula and Rules

The Formula and associated rules for designing and constructing 12-metre yachts has been modified several times from inception in racing.

The purpose of the Formula and rules was to encourage designer creativity to optimise designs to get the best overall performance when racing whilst maintaining competitive racing between the different designs. Although the Formula and Rules allowed some creativity they were also intended to be comprehensive enough to eliminate loop holes which could result in an extreme design which conformed to the 12-metre rule but completely outclassed other contemporary designs on the race course. If the rules were considered to be too loose then it would discourage the building of new 12-metre yachts for fear of a new boat being outclassed even before it was launched.

The Rules were typically updated in response to advances in areas such as material technology (eg Metal masts versus wooden masts etc), design technology (eg use of the wind tunnel to design sails and sail/mast combinations, advances in fluid dynamics etc), equipment (eg winch technology etc)

The Rule has four distinct periods:-

First Rating Rule

Used from 1907-1920

:12 mbox{ metres} = frac{L + B + 1/3G +3d + 1/3sqrt{S} - F}{2}

where
* L = waterline length (LWL)
* B = beam
* G = chain girth
* d = difference between girth and chain
* S = sail area
* F = freeboard

econd Rating Rule

Used from 1920-1933.:12 mbox{ metres} = frac{L + 0.25G +2d + sqrt{S} - F}{2.5}

where
* L = waterline length (LWL)
* G = chain girth
* d = difference between girth and chain
* S = sail area
* F = freeboard

Third Rating Rule

Used from 1933 –1939.

:12 mbox{ metres} = frac{L + 2d + sqrt{S} - F}{2.37}

where
* L = waterline length (LWL)
* d = difference between girth and chain
* S = sail area
* F = freeboard

Third Rating Rule - America's Cup Rule

Used from 1956 onwards:-

( [http://www.12mrclass.com/ International Twelve Metre Association] ):

:12 mbox{ metres} = frac{L + 2d + sqrt{S} - F}{2.37}

where
* L = waterline length (LWL)
* d = difference between girth and chain
* S = sail area
* F = freeboard

Associated with the formula is an extremely comprehensive set of rules. The rules can be classified into two main areas. Rules concerning safety and rules to ensure competitive racing. For example the maximum total area of all cockpits is specified to minimise the chance of a boat being swamped in rougher seas. Structural requirements are specified to ensure that strength is not sacrificed by the need to get weight low down in the keel. Materials are specified plus numerous other details concerning all aspects of the boat. The intention is to challenge designers but ensure competitive racing.

America's Cup

When America's Cup racing resumed in 1958 after World War II, more economical vessels were desired to replace the huge and expensive J-class yachts that were raced in the 1930s; the 12-metre class was selected. In 1987, use of the 12-metre class was ended, switching to International America's Cup Class boats for the 1992 competition.

Famous 12-metre Yachts - America's Cup Era

* Australia II, Alan Bond's famous winged keel design that won the 1983 America's Cup. The boat that ended the longest winning streak in all of sport. Australia II designed by Ben Lexcen was one of the first racing yachts to use appendages/fins on the keel which made the yacht more manoeuvrable. The keel design allowed a reduction in weight in the keel which then allowed other beneficial changes in the measured dimensions which resulted in a yacht optimized for the conditions on the race course in Newport Rhode Island.
*The great naval architect Olin Stephens of Sparkman & Stephens designed two successful America's Cup defenders for the NYYC. The first is Intrepid, winner of 1967 and 1970 AC. Followed by Courageous in 1974 and Ted Turner's notable 1977 win. Both boats have become legendary in their own right and both are still sailing and racing today in Newport. Intrepid is available for charter whereas Courageous is privately onwned.
* Vim: Designed in 1939 by Olin Stephens who considered the possibilities given by every aspect of the rules and produced a very fast boat. Vim had numerous innovative features including a trim tab on the rudder, two-speed winches and a lighter mast made made of duralamin (a form of aluminium used in the aircraft industry). Vim is considered a benchmark design which was continually refined over her racing career. In 1939 Vim came to the UK and won 19 races out of 28. The next generations of 12-metres designed and built 20 years after Vim was launched still found Vim extremely difficult to beat in competition.
* Kiwi Magic KZ 7 Runner-up in Louis Vitton Cup 1986, and the first Twelve Metre to be made from fibreglass. Called at the time "Plastic Fantastic". Skippereed by Chris Dickson
*Stars and Stripes '87 Winner of the America's Cup 1987. By far the most consistently improved and thus fastest boat of its era.Fact|date=April 2007
*Enterprise, US-27, the only aluminum American 12 meter, built for the 1977 defender trials.
*Onawa - The oldest American 12 metre still intact, US-6.

In addition to design there are other factors which affect racing results. There are other 12-metre designs which are fast boats but struggled to reach their full potential due to inadequate crewing or lack of preparation or bad luck or a combination of both.In the America's Cup era it will always be a matter of debate but Australia II, Intrepid and Vim are generally considered to be the best 12-metres in terms of design excellence and performance on the race course.

Post America's Cup

12-metre yachts were used for the last time in America’s Cup competition at the 1987 event held in Fremantle, Australia. 12-metres continued to race together on a local basis but due to the high cost and without the impetus and prestige surrounding competition in the America’s Cup, no new boats have been built since 1987.

The latter part of the 20th century saw a big revival in interest in classic yachts including 12-metre yachts and particularly those of wooden construction. There were an increasing number of prestigious regattas in attractive locations such as the Mediterranean and the Caribbean. Also a more prosperous global economy prevailed and the result was an increasing number of restorations and racing of older ‘classic’ 12-metres.

Potential restorers of older boats who wanted to race were potentially faced with a dilemma of whether to restore a boat to its original specification or make modifications to make an older design competitive with a newer design. For example a yacht designed under the First International Rule would have a wooden mast, gaff rig and sails made of cotton whereas yachts designed under the Third International Rule, such as Vim, had a metal mast, Bermudan rig and sails made from Dacron.

To encourage participation in racing and also encourage restoration which remained true to the spirit of the original design, the 12-metre class association introduced a handicapping system to allow 12-metres of all ages to race together on a more equal footing. The basis is a handicap applied to each boat according to the ‘era’ of its design to encourage owners to restore older boats and participate in exciting and sociable racing.

A 12-metre is classified as belonging to one of three periods. Each Period is defined as a range of dates which coincided with a particular type of keel or rudder design becoming widespread.

Period A:- Also called Grand Prix, this subclass starts when winged keels became the norm. It covers all yachts built with winged keels and all yachts constructed after 1983. Australia II was the first wing keeled 12-metre and, despite being constructed before 1984, is in Period A. USA, or 12 US-61, also fits into this category even though its keel structure is different from the standard winged keel of the class. It is also the only 12-metre to have a "canard" or rudder mounted forward of the keel.

Period B (Modern):- Starts when a skeg mounted rudder separated from the keel became the norm. It includes all 12-metres built during the period 1968 - 1983. Intrepid is considered the first Modern even though it was built in 1967 since it was the first 12-metre to use a skeg mounted rudder. It excludes Australia II built in 1982 which is in Period A due to its winged keel design.

Period C (Classic):- All other 12 metre class yachts built before 1968 but excluding Intrepid which is in Period B by virtue of its skeg mounted rudder design. Period C has several sub-classes based on the year of construction including Classic Antique (most of which are in fact gaff rigged), Classic Vintage and Classic Traditional. Older sloop-rigged yachts like Vim and Onawa fit into the Vintage category while the later Classics such as American Eagle and Nefertiti are considered Traditional.

In the early 21st century interest in ownership and restoration of 12-metres was such that specialist restoration companies would speculatively locate old boats under threat of destruction and publicize the availability in order to attract the funding for a full restoration .

External links

* [http://www.12mrclass.com The International Twelve Metre Association (ITMA)]
* [http://www.12mr.de Good site for details of all 12 metre yachts built worldwide]
* [http://www.sparkmanstephens.com/yachtdesign/sailyachts/twelvemeter_designs.php Sparkman & Stephens: The Twelves] (Technical explanation)
* [http://www.maritimewood.com/Decade-of-Legendary-01.html Additional information regarding the 12 metre yacht class and the builders behind them]
* [http://www.classic12metercharters.com/history.asp 12-metre history]


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • 8 Metre Class — International Eight Metre Class are class of racing yachts. Eight Metre boats (often called Eights or 8mR) are a construction class , meaning that the boats are not identical but are all designed to meet specific measurement formula, in this case …   Wikipedia

  • Sailing at the 1908 Summer Olympics - 12 metre class — The 12 metre class was one of four metre classes featured on the Sailing at the 1908 Summer Olympics programme.The 12 metre event, unlike the other three sailing events, was held on the River Clyde at Glasgow. Competition was to be carried out… …   Wikipedia

  • Sailing at the 1908 Summer Olympics - 6 metre class — The 6 metre class was one of four metre classes featured on the Sailing at the 1908 Summer Olympics programme. Competition was carried out over three races. Dormy won the first two of the three, while Zut took top honours in the… …   Wikipedia

  • Sailing at the 1908 Summer Olympics - 7 metre class — The 7 metre class was one of four metre classes featured on the Sailing at the 1908 Summer Olympics programme. Competition was to be carried out over three races. As only Heroine entered the event, no competition was held.tandingsources* * …   Wikipedia

  • Sailing at the 1908 Summer Olympics - 8 metre class — The 8 metre class was one of four metre classes featured on the Sailing at the 1908 Summer Olympics programme. Competition was carried out over three races. Cobweb won two of the three, while Vinga took top honours in the third.tandingsources* * …   Wikipedia

  • Sailing at the 1912 Summer Olympics - 6 metre class — The 6 metre class was a sailing event held as part of the Sailing at the 1912 Summer Olympics programme. It was the second appearance of the event.MedalistsReferences* * Pl icon …   Wikipedia

  • Sailing at the 1912 Summer Olympics - 8 metre class — The 8 metre class was a sailing event held as part of the Sailing at the 1912 Summer Olympics programme. It was the second appearance of the event. Races were held from July 20 1912 to July 22 1912 off the coast of Nynäshamn.MedalistsReferences*… …   Wikipedia

  • Sailing at the 1912 Summer Olympics - 10 metre class — The 10 metre class was a sailing event held as part of the Sailing at the 1912 Summer Olympics programme. It was the first appearance of the event.MedalistsReferences* * Pl icon …   Wikipedia

  • Sailing at the 1912 Summer Olympics - 12 metre class — The 12 metre class was a sailing event held as part of the Sailing at the 1912 Summer Olympics programme. It was the second appearance of the event.MedalistsReferences* * Pl icon …   Wikipedia

  • Sailing at the 1948 Summer Olympics - 6 metre class — The 6 metre class was one of five sailing events held as part of the Sailing at the 1948 Summer Olympics programme. It was the ninth appearance of the event.Races were held off the coast of Torquay.The Finnish boat Ralia is the former Swedish… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”