Mathematical descriptions of opacity

Mathematical descriptions of opacity

When an electromagnetic wave travels through a medium in which it gets absorbed (this is called an "opaque" or "attenuating" medium), it undergoes exponential decay as described by the Beer–Lambert law. However, there are many possible ways to characterize the wave and how quickly it is absorbed. This article describes the mathematical relationships among:

Note that in many of these cases there are multiple, conflicting definitions and conventions in common use. This article is not necessarily comprehensive or universal.

Contents

Background: Unattenuated wave

A electromagnetic wave propagating in the +z-direction is conventionally described by the equation:  \mathbf{E}(z,t) = \mathrm{Re} (\mathbf{E}_0 e^{i(k z - \omega t)}) where

E0 is a vector in the x-y plane, with the units of an electric field (the vector is in general a complex vector, to allow for all possible polarizations and phases),
ω is the angular frequency of the wave,
k is the angular wavenumber of the wave,
Re indicates real part.
e is Euler's number; see the article Complex exponential for information about how e is raised to complex exponents.

The wavelength is, by definition,

 \lambda = \frac{2\pi}{k} .

For a given frequency, the wavelength of an electromagnetic wave is affected by the material in which it is propagating. The vacuum wavelength (the wavelength that a wave of this frequency would have if it were propagating in vacuum) is

 \lambda_0 = \frac{2\pi c}{\omega}

(c is the speed of light in vacuum). In the absence of attenuation, the index of refraction (also called refractive index) is the ratio of these two wavelengths, i.e.,

n = \frac{\lambda_0}{\lambda} = \frac{ck}{\omega}.

The intensity of the wave is proportional to the square of the amplitude, time-averaged over many oscillations of the wave, which amounts to:

 I(z) \propto |\mathbf{E}_0 e^{i(k z - \omega t)}|^2 = |\mathbf{E}_0|^2 .

Note that this intensity is independent of the location z, a sign that this wave is not attenuating with distance. We define I0 to equal this constant intensity:

 I(z) = I_0 \propto |\mathbf{E}_0|^2.

Complex conjugate ambiguity

Because

 \mathrm{Re} (\mathbf{E}_0 e^{i(k z - \omega t)}) = \mathrm{Re} (\mathbf{E}_0^* e^{-i(k z - \omega t)}),

either expression can be used interchangeably. Generally, physicists and chemists use the convention on the left (with e iωt), while electrical engineers use the convention on the right (with e + iωt, for example see electrical impedance). The distinction is irrelevant for an unattenuated wave, but becomes relevant in some cases below. For example, there are two definitions of complex refractive index, one with a positive imaginary part and one with a negative imaginary part, derived from the two different conventions.[1] The two definitions are complex conjugates of each other.

Absorption coefficient

One way to incorporate attenuation into the mathematical description of the wave is via an absorption coefficient:[2]

 \mathbf{E}(z,t) = e^{-\alpha_{abs} z / 2} \mathrm{Re} (\mathbf{E}_0 e^{i(k z - \omega t)})

where αabs is the absorption coefficient. The intensity in this case satisfies:

I(z) \propto |e^{-\alpha_{abs} z/2}\mathbf{E}_0 e^{i(k z - \omega t)}|^2 = |\mathbf{E}_0|^2 e^{-\alpha_{abs} z}

i.e.,

I(z) = I_0 e^{-\alpha_{abs} z}

The absorption coefficient, in turn, is simply related to several other quantities:

  • Attenuation coefficient is essentially (but not quite always) synonymous with absorption coefficient; see attenuation coefficient for details.
  • Molar absorption coefficient or Molar extinction coefficient, also called molar absorptivity, is the absorption coefficient divided by molarity (and usually multiplied by ln(10), i.e., decadic); see Beer-Lambert law and molar absorptivity for details.
  • Mass attenuation coefficient, also called mass extinction coefficient, is the absorption coefficient divided by density; see mass attenuation coefficient for details.
  • Absorption cross section and scattering cross section are both quantitatively related to the absorption coefficient (or attenuation coefficient); see absorption cross section and scattering cross section for details.
  • The absorption coefficient is also sometimes called opacity; see opacity (optics).

Penetration depth, skin depth

A very similar approach uses the penetration depth:[3]

 \mathbf{E}(z,t) = e^{-z / (2 \delta_{pen})} \mathrm{Re} (\mathbf{E}_0 e^{i(k z - \omega t)})
I(z) = I_0 e^{-z/\delta_{pen}}

where δpen is the penetration depth.

The skin depth δskin is defined so that the wave satisfies:[4][5]

 \mathbf{E}(z,t) = e^{-z / \delta_{skin} } \mathrm{Re} (\mathbf{E}_0 e^{i(k z - \omega t)})
I(z) = I_0 e^{-2z/\delta_{skin}}

where δskin is the skin depth.

Physically, the penetration depth is the distance which the wave can travel before its intensity reduces by a factor of 1/e \approx 0.37. The skin depth is the distance which the wave can travel before its amplitude reduces by that same factor.

The absorption coefficient is related to the penetration depth and skin depth by

αabs = 1 / δpen = 2 / δskin

Complex wavenumber, propagation constant

Another way to incorporate attenuation is to use essentially the original expression:

 \mathbf{E}(z,t) = \mathrm{Re} (\mathbf{E}_0 e^{i(\tilde{k} z - \omega t)})

but with a complex wavenumber (as indicated by writing it as \tilde{k} instead of k).[4][6] Then the intensity of the wave satisfies:

 I(z) \propto |\mathbf{E}_0 e^{i(\tilde{k} z - \omega t)}|^2

i.e.,

I(z) = I_0 e^{-2z \mathrm{Im}(\tilde{k})}

Therefore, comparing this to the absorption coefficient approach,[2]

 \mathrm{Im}(\tilde{k}) = \alpha_{abs}/2 ,     \mathrm{Re}(\tilde{k}) = k

(k is the standard (real) angular wavenumber, as used in any of the previous formulations.) In accordance with the ambiguity noted above, some authors use the complex conjugate definition,  \mathrm{Im}(\tilde{k}) = -\alpha_{abs}/2.[7]

A closely related approach, especially common in the theory of transmission lines, uses the propagation constant:[8][9]

 \mathbf{E}(z,t) = \mathrm{Re} (\mathbf{E}_0 e^{-\gamma z + i \omega t})
I(z) = I0e − 2zRe(γ)

where γ is the propagation constant.

Comparing the two equations, the propagation constant and complex wavenumber are related by:

\gamma^* = -i\tilde{k}

(where the * denotes complex conjugation), or more specifically:

\mathrm{Re}(\gamma) = \mathrm{Im}(\tilde{k}) = \alpha_{abs}/2

(This quantity is also called the attenuation constant,[7][10] sometimes denoted α.)

\mathrm{Im}(\gamma) = \mathrm{Re}(\tilde{k}) = k

(This quantity is also called the phase constant, sometimes denoted β.)[10]

Unfortunately, the notation is not always consistent. For example, \tilde{k} is sometimes called "propagation constant" instead of γ, which swaps the real and imaginary parts.[11]

Complex refractive index, extinction coefficient

Recall that in nonattenuating media, the refractive index and wavenumber are related by:

n = \frac{ck}{\omega}

A complex refractive index can therefore be defined in terms of the complex wavenumber defined above:

\tilde{n} = \frac{c\tilde{k}}{\omega}.

In other words, the wave is required to satisfy

 \mathbf{E}(z,t) = \mathrm{Re} (\mathbf{E}_0 e^{i\omega((\tilde{n} z/c) - t)}).

Comparing to the preceding section, we have

\mathrm{Re}(\tilde{n}) = \frac{ck}{\omega}, and \mathrm{Im}(\tilde{n}) = \frac{c \alpha_{abs}}{2\omega}=\frac{\lambda_0 \alpha_{abs}}{4\pi}.

The real part of \tilde{n} is often (ambiguously) called simply the refractive index. The imaginary part is called the extinction coefficient.

In accordance with the ambiguity noted above, some authors use the complex conjugate definition, where the (still positive) extinction coefficient is minus the imaginary part of \tilde{n}.[1][12]

Complex permittivity

In nonattenuating media, the permittivity and refractive index are related by:

n = c \sqrt{\mu \epsilon} (SI),     n = \sqrt{\mu \epsilon} (cgs)

where μ is the permeability and \epsilon is the permittivity. In attenuating media, the same relation is used, but the permittivity is allowed to be a complex number, called complex permittivity:[2]

\tilde{n} = c \sqrt{\mu \tilde{\epsilon}} (SI),     \tilde{n} = \sqrt{\mu \tilde{\epsilon}} (cgs).

Squaring both sides and using the results of the previous section gives:[6]

\mathrm{Re}(\tilde{\epsilon}/\epsilon_0) = \frac{c^2}{(\omega^2)(\mu/\mu_0)}(k^2-\frac{\alpha_{abs}^2}{4})
\mathrm{Im}(\tilde{\epsilon}/\epsilon_0) = \frac{c^2}{(\omega^2)(\mu/\mu_0)}(k\alpha_{abs})

(this is in SI; in cgs, drop the \epsilon_0 and μ0).

This approach is also called the complex dielectric constant; the dielectric constant is synonymous with \epsilon/\epsilon_0 in SI, or simply \epsilon in cgs.

AC conductivity

Another way to incorporate attenuation is through the conductivity, as follows.[13]

One of the equations governing electromagnetic wave propagation is the Maxwell-Ampere law:

\nabla \times \mathbf{H} = \mathbf{J} + \frac{d\mathbf{D}}{dt} (SI)     \nabla \times \mathbf{H} = \frac{4\pi}{c} \mathbf{J} + \frac{1}{c}\frac{d\mathbf{D}}{dt} (cgs)

where D is the displacement field. Plugging in Ohm's law and the definition of (real) permittivity

\nabla \times \mathbf{H} = \sigma \mathbf{E} + \epsilon \frac{d\mathbf{E}}{dt} (SI)     \nabla \times \mathbf{H} = \frac{4\pi \sigma}{c} \mathbf{E} + \frac{\epsilon}{c}\frac{d\mathbf{E}}{dt} (cgs)

where σ is the (real, but frequency-dependent) conductivity, called AC conductivity. With sinusoidal time dependence on all quantities, i.e. \mathbf{H} = \mathrm{Re}(\mathbf{H}_0 e^{-i\omega t}) and \mathbf{E} = \mathrm{Re}(\mathbf{E}_0 e^{-i\omega t}), the result is

\nabla \times \mathbf{H}_0 = -i\omega\mathbf{E}_0(\epsilon + i\frac{\sigma}{\omega}) (SI)     \nabla \times \mathbf{H}_0 = \frac{-i\omega}{c} \mathbf{E}_0(\epsilon + i\frac{4\pi \sigma}{\omega}) (cgs)

If the current J was not included explicitly (through Ohm's law), but only implicitly (through a complex permittivity), the quantity in parentheses would be simply the complex permittivity. Therefore,

\tilde{\epsilon} = \epsilon + i \frac{\sigma}{\omega} (SI)     \tilde{\epsilon} = \epsilon + i\frac{4\pi \sigma}{\omega} (cgs).

Comparing to the previous section, the AC conductivity satisfies

\sigma = \frac{k\alpha_{abs}c^2}{(\omega)(\mu/\mu_0)} (SI)     \sigma = \frac{k\alpha_{abs}c^2}{4\pi\omega\mu} (cgs).

References and footnotes

  • Jackson, John David (1999). Classical Electrodynamics (3rd ed. ed.). New York: Wiley. ISBN 0-471-30932-X. 
  • Griffiths, David J. (1998). Introduction to Electrodynamics (3rd ed.). Prentice Hall. ISBN 0-13-805326-X. 
  • J. I. Pankove, Optical Processes in Semiconductors, Dover Publications Inc. New York (1971).
  1. ^ a b For the definition of complex refractive index with a positive imaginary part, see Optical Properties of Solids, by Mark Fox, p. 6. For the definition of complex refractive index with a negative imaginary part, see Handbook of infrared optical materials, by Paul Klocek, p. 588.
  2. ^ a b c Griffiths, section 9.4.3.
  3. ^ IUPAC Compendium of Chemical Terminology
  4. ^ a b Griffiths, section 9.4.1.
  5. ^ Jackson, Section 5.18A
  6. ^ a b Jackson, Section 7.5.B
  7. ^ a b Integrated Photonics: Fundamentals, by Ginés Lifante, p.35
  8. ^ "Propagation constant", in ATIS Telecom Glossary 2007
  9. ^ Advances in imaging and electron physics, Volume 92, by P. W. Hawkes and B. Kazan, p.93
  10. ^ a b Electric Power Transmission and Distribution, by S. Sivanagaraju, p.132
  11. ^ See, for example, Encyclopedia of laser physics and technology
  12. ^ Pankove, pp. 87-89
  13. ^ Jackson, section 7.5C

Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Opacity (optics) — Opacity is the measure of impenetrability to electromagnetic or other kinds of radiation, especially visible light. In radiative transfer, it describes the absorption and scattering of radiation in a medium, such as a plasma, dielectric,… …   Wikipedia

  • Absorption (electromagnetic radiation) — An overview of electromagnetic radiation absorption. This example discusses the general principle using visible light as specific example. A white beam source emitting light of multiple wavelengths is focused on a sample (the complementary color… …   Wikipedia

  • Refractive index — Refraction of light at the interface between two media. In optics the refractive index or index of refraction of a substance or medium is a measure of the speed of light in that medium. It is expressed as a ratio of the speed of light in vacuum… …   Wikipedia

  • Propagation constant — The propagation constant of an electromagnetic wave is a measure of the change undergone by the amplitude of the wave as it propagates in a given direction. The quantity being measured can be the voltage or current in a circuit or a field vector… …   Wikipedia

  • Snell's law — In optics and physics, Snell s law (also known as Descartes law, the Snell–Descartes law, and the law of refraction) is a formula used to describe the relationship between the angles of incidence and refraction, when referring to light or other… …   Wikipedia

  • Electrical resistivity and conductivity — This article is about electrical conductivity in general. For the specific conductance of aqueous solutions, see Conductivity (electrolytic). For other types of conductivity, see Conductivity. Electrical resistivity (also known as resistivity,… …   Wikipedia

  • Beer-Lambert law — In optics, the Beer–Lambert law, also known as Beer s law or the Lambert–Beer law or the Beer–Lambert–Bouguer law (in fact, most of the permutations of these three names appear somewhere in literature) is an empirical relationship that relates… …   Wikipedia

  • Electrical conductivity — or specific conductivity is a measure of a material s ability to conduct an electric current. When an electrical potential difference is placed across a conductor, its movable charges flow, giving rise to an electric current. The conductivity σ… …   Wikipedia

  • Molar absorptivity — The molar absorption coefficient, molar extinction coefficient, or molar absorptivity, is a measurement of how strongly a chemical species absorbs light at a given wavelength. It is an intrinsic property of the species; the actual absorbance, A,… …   Wikipedia

  • Skin depth — is a measure of the distance an alternating current can penetrate beneath the surface of a conductor.When an electromagnetic wave interacts with a conductive material, mobile charges within the material are made to oscillate back and forth with… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”