Lithography

Lithography
Charles Marion Russell's The Custer Fight (1903). Note the range of tones, fading toward the edges.

Lithography (from Greek λίθος - lithos, 'stone' + γράφειν - graphein, 'to write') is a method for printing using a stone (lithographic limestone) or a metal plate with a completely smooth surface. Invented in 1796 by Bavarian author Alois Senefelder as a cheap method of publishing theatrical works,[1][2] lithography can be used to print text or artwork onto paper or other suitable material.[3]

Contents

Introduction

Lithography originally used an image drawn (etched) into a coating of wax or an oily substance applied to a plate of lithographic stone as the medium to transfer ink to a blank paper sheet, and so produce a printed page. In modern lithography, the image is made of a polymer coating applied to a flexible aluminum plate. To print an image lithographically, the flat surface of the stone plate is roughened slightly—etched—and divided into hydrophilic regions that accept a film of water, and thereby repel the greasy ink; and hydrophobic regions that repel water and accept ink because the surface tension is greater on the greasy image area,which remains dry. The image can be printed directly from the stone plate (the orientation of the image is reversed), or it can be offset, by transferring the image onto a flexible sheet (rubber) for printing and publication.Lithography is an application of ultraviolet "Light".

As a printing technology, lithography is different from intaglio printing (gravure), wherein a plate is either engraved, etched, or stippled to score cavities to contain the printing ink; and woodblock printing, and letterpress printing, wherein ink is applied to the raised surfaces of letters or images. Most types of books of high-volume text are printed with offset lithography, the most common form of printing technology. Etymologically, the word lithography also denotes photolithography, a microfabrication technique used to make integrated circuits and microelectromechanical systems, as such are more technologically akin to etching than lithography, printing from a stone plate.

The principle of lithography

Lithography uses simple chemical processes to create an image. For instance, the positive part of an image is a water-repelling ("hydrophobic") substance, while the negative image would be water-retaining ("hydrophilic"). Thus, when the plate is introduced to a compatible printing ink and water mixture, the ink will adhere to the positive image and the water will clean the negative image. This allows a flat print plate to be used, enabling much longer and more detailed print runs than the older physical methods of printing (e.g., intaglio printing, letterpress printing).

Lithography was invented by Alois Senefelder in Bohemia in 1796. In the early days of lithography, a smooth piece of limestone was used (hence the name "lithography": "lithos" (λιθος) is the ancient Greek word for stone). After the oil-based image was put on the surface, a solution of gum arabic in water was applied, the gum sticking only to the non-oily surface. During printing, water adhered to the gum arabic surfaces and avoided the oily parts, while the oily ink used for printing did the opposite.

Lithography on limestone

Lithography stone and mirror-image print of a map of Munich

Lithography works because of the mutual repulsion of oil and water. The image is drawn on the surface of the print plate with a fat or oil-based medium (hydrophobic) such as a wax crayon, which may be pigmented to make the drawing visible. A wide range of oil-based media is available, but the durability of the image on the stone depends on the lipid content of the material being used, and its ability to withstand water and acid. After the drawing of the image, an aqueous solution of gum arabic, weakly acidified with nitric acid HNO3 is applied to the stone. The function of this solution is to create a hydrophilic layer of calcium nitrate salt, Ca(NO3)2, and gum arabic on all non-image surfaces. The gum solution penetrates into the pores of the stone, completely surrounding the original image with a hydrophilic layer that will not accept the printing ink. Using lithographic turpentine, the printer then removes any excess of the greasy drawing material, but a hydrophobic molecular film of it remains tightly bonded to the surface of the stone, rejecting the gum arabic and water, but ready to accept the oily ink.[4]

When printing, the stone is kept wet with water. Naturally the water is attracted to the layer of gum and salt created by the acid wash. Printing ink based on drying oils such as linseed oil and varnish loaded with pigment is then rolled over the surface. The water repels the greasy ink but the hydrophobic areas left by the original drawing material accept it. When the hydrophobic image is loaded with ink, the stone and paper are run through a press which applies even pressure over the surface, transferring the ink to the paper and off the stone.

Senefelder had experimented during the early 19th century with multicolor lithography; in his 1819 book, he predicted that the process would eventually be perfected and used to reproduce paintings.[1] Multi-color printing was introduced by a new process developed by Godefroy Engelmann (France) in 1837 known as chromolithography.[1] A separate stone was used for each color, and a print went through the press separately for each stone. The main challenge was to keep the images aligned (in register). This method lent itself to images consisting of large areas of flat color, and resulted in the characteristic poster designs of this period.

The modern lithographic process

A 1902 lithograph map (original size 33×24 cm)

High-volume lithography is used presently to produce posters, maps, books, newspapers, and packaging—just about any smooth, mass-produced item with print and graphics on it. Most books, indeed all types of high-volume text, are now printed using offset lithography.

For offset lithography, which depends on photographic processes, flexible aluminum, polyester, mylar or paper printing plates are used instead of stone tablets. Modern printing plates have a brushed or roughened texture and are covered with a photosensitive emulsion. A photographic negative of the desired image is placed in contact with the emulsion and the plate is exposed to ultraviolet light. After development, the emulsion shows a reverse of the negative image, which is thus a duplicate of the original (positive) image. The image on the plate emulsion can also be created by direct laser imaging in a CTP (Computer-To-Plate) device known as a platesetter. The positive image is the emulsion that remains after imaging. For many years, chemicals have been used to remove the non-image emulsion, but nowadays plates are available that do not require chemical processing.

Lithography press for printing maps in Munich

The plate is affixed to a cylinder on a printing press. Dampening rollers apply water, which covers the blank portions of the plate but is repelled by the emulsion of the image area. Ink, which is hydrophobic, is then applied by the inking rollers, which is repelled by the water and only adheres to the emulsion of the image area—such as the type and photographs on a newspaper page.

If this image were transferred directly to paper, it would create a mirror-type image and the paper would become too wet. Instead, the plate rolls against a cylinder covered with a rubber blanket, which squeezes away the water, picks up the ink and transfers it to the paper with uniform pressure. The paper passes between the blanket cylinder and a counter-pressure or impression cylinder and the image is transferred to the paper. Because the image is first transferred, or offset to the rubber blanket cylinder, this reproduction method is known as offset lithography or offset printing.[5]

Many innovations and technical refinements have been made in printing processes and presses over the years, including the development of presses with multiple units (each containing one printing plate) that can print multi-color images in one pass on both sides of the sheet, and presses that accommodate continuous rolls (webs) of paper, known as web presses. Another innovation was the continuous dampening system first introduced by Dahlgren instead of the old method which is still used on older presses (conventional dampening), which are rollers covered with molleton (cloth) which absorbs the water. This increased control of the water flow to the plate and allowed for better ink and water balance. Current dampening systems include a "delta effect or vario " which slows the roller in contact with the plate, thus creating a sweeping movement over the ink image to clean impurities known as "hickies".

The process of lithography printing is seen in the linked picture. [Lithographic Printing] link title http://www.istc.illinois.edu/info/library_docs/manuals/printing/images/offsetlitho.gif This simplified version of a lithographic printing press gives you an idea of how the printing process works. This press is also called an ink pyramid due to the fact that the ink is transferred through several layers of rollers with different purposes. The lithographic printing presses are commonly used in newspaper production where fast rolling and jumping rolls are a famous part of the pressing scene in every newspaper production movie.

The advent of desktop publishing made it possible for type and images to be modified easily on personal computers for eventual printing by desktop or commercial presses. The development of digital imagesetters enabled print shops to produce negatives for platemaking directly from digital input, skipping the intermediate step of photographing an actual page layout. The development of the digital platesetter during the late 20th century eliminated film negatives altogether by exposing printing plates directly from digital input, a process known as computer to plate printing.

Microlithography and nanolithography

City of Words, lithograph by Vito Acconci, 1999

Microlithography and nanolithography refer specifically to lithographic patterning methods capable of structuring material on a fine scale. Typically, features smaller than 10 micrometers are considered microlithographic, and features smaller than 100 nanometers are considered nanolithographic. Photolithography is one of these methods, often applied to semiconductor manufacturing of microchips. Photolithography is also commonly used for fabricating Microelectromechanical systems (MEMS) devices. Photolithography generally uses a pre-fabricated photomask or reticle as a master from which the final pattern is derived.

Although photolithographic technology is the most commercially advanced form of nanolithography, other techniques are also used. Some, for example electron beam lithography, are capable of much greater patterning resolution (sometimes as small as a few nanometers). Electron beam lithography is also important commercially, primarily for its use in the manufacture of photomasks. Electron beam lithography as it is usually practiced is a form of maskless lithography, in that a mask is not required to generate the final pattern. Instead, the final pattern is created directly from a digital representation on a computer, by controlling an electron beam as it scans across a resist-coated substrate. Electron beam lithography has the disadvantage of being much slower than photolithography.

In addition to these commercially well-established techniques, a large number of promising microlithographic and nanolithographic technologies exist or are being developed, including nanoimprint lithography, interference lithography, X-ray lithography, extreme ultraviolet lithography, magnetolithography and scanning probe lithography. Some of these new techniques have been used successfully for small-scale commercial and important research applications. Surface-charge lithography, in fact Plasma desorption mass spectrometry can be directly patterned on polar dielectric crystals via pyroelectric effect,[6] Diffraction lithography.[7]

Lithography as an artistic medium

Smiling Spider by Odilon Redon, 1891

During the first years of the 19th century, lithography had only a limited effect on printmaking, mainly because technical difficulties remained to be overcome. Germany was the main center of production in this period. Godefroy Engelmann, who moved his press from Mulhouse to Paris in 1816, largely succeeded in resolving the technical problems, and during the 1820s lithography was adopted by artists such as Delacroix and Géricault. London also became a center, and some of Géricault's prints were in fact produced there. Goya in Bordeaux produced his last series of prints by lithography—The Bulls of Bordeaux of 1828. By the mid-century the initial enthusiasm had somewhat diminished in both countries, although the use of lithography was increasingly favored for commercial applications, which included the great prints of Daumier, published in newspapers. Rodolphe Bresdin and Jean-François Millet also continued to practice the medium in France, and Adolf Menzel in Germany. In 1862 the publisher Cadart tried to initiate a portfolio of lithographs by various artists which was not successful, but included several superb prints by Manet. The revival began during the 1870s, especially in France with artists such as Odilon Redon, Henri Fantin-Latour and Degas producing much of their work in this manner. The need for strictly limited editions to maintain the price had now been realized, and the medium become more accepted.

Self Portrait with Skeleton Arm by Edvard Munch

In the 1890s color lithography became greatly popular with French artists, Toulouse-Lautrec most notably of all, and by 1900 the medium in both color and monotone was an accepted part of printmaking, although France and the US have used it more than other countries.

During the 20th century, a group of celebrated artists, including Calder, Chagall, Dufy, Léger, Matisse, Miró, and Picasso, rediscovered the largely undeveloped art form of lithography thanks to the Mourlot Studios, also known as Atelier Mourlot, a Parisian printshop founded in 1852 by the Mourlot family. The Atelier Mourlot originally specialized in the printing of wallpaper, but was transformed when the founder's grandson, Fernand Mourlot, invited a number of 20th-century artists to explore the complexities of fine art printing. Fernand encouraged the painters to work directly on lithographic stones in order to create original artworks that could then be executed under the direction of master printers in small editions. The combination of modern artist and master printer resulted in unique and visually striking lithographs, which were used as posters to promote the artists' work.[8][9]

Grant Wood, George Bellows, Alphonse Mucha, Max Kahn, Pablo Picasso, Eleanor Coen, Jasper Johns, David Hockney, Susan Dorothea White and Robert Rauschenberg are a few of the artists who have produced most of their prints in the medium. M.C. Escher is considered a master of lithography, and many of his prints were created using this process. More than other printmaking techniques, printmakers in lithography still largely depend on access to a good printer, and the development of the medium has been greatly influenced by when and where these have been established. See the List of Printmakers for more practitioners.

As a special form of lithography, the Serilith process is sometimes used. Serilith are mixed media original prints created in a process in which an artist uses the lithograph and serigraph process. The separations for both processes are hand-drawn by the artist. The serilith technique is used primarily to create fine art limited print editions.[10]

Gallery

See also

References

  1. ^ a b c Meggs, Philip B. A History of Graphic Design. (1998) John Wiley & Sons, Inc. p 146 ISBN 0-471-291-98-6
  2. ^ Carter, Rob, Ben Day, Philip Meggs. Typographic Design: Form and Communication, Third Edition. (2002) John Wiley & Sons, Inc. p 11
  3. ^ Pennel ER, ed (1915). Lithography and Lithographers. London: T. Fisher Unwin Publisher. http://www.archive.org/details/lithographylitho00penn. 
  4. ^ A. B. Hoen, Discussion of the Requisite Qualities of Lithographic Limestone, with Report on Tests of the Lithographic Stone of Mitchell County, Iowa, Iowa Geological Survey Annual Report, 1902, Des Moines, 1903; pages 339-352.
  5. ^ see diagram at compassrose.com
  6. ^ Surface-charge lithography for direct pdms micro-patterning S. Grilli, V. Vespini, P. Ferraro, Langmuir 24, 13262-13265 (2008). http://dx.doi.org/10.1021/la803046j
  7. ^ Flexible coherent diffraction lithography by tunable phase arrays in lithium niobate crystals M. Paturzo, S. Grilli, S. Mailis, G. Coppola, M. Iodice, M. Gioffré and P. Ferraro Optics Communications 281, 1950–1953 (2008). http://dx.doi.org/10.1016/j.optcom.2007.12.056
  8. ^ History of 20th century lithography by Picasso, Matisse, Chagall, Braque, Leger at Atelier Mourlot, French Institute Alliance Française
  9. ^ Mourlot, Fernand. Twentieth Century Posters. Wellfleet Press: Secaucus, New Jersey, 1989
  10. ^ What is a Serilith?

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Lithography — Li*thog ra*phy, n. [Cf. F. lithographie.] 1. The art or process of putting designs or writing, with a greasy material, on stone, and of producing printed impressions therefrom. The process depends, in the main, upon the antipathy between grease… …   The Collaborative International Dictionary of English

  • lithography — UK US /ˌlɪˈθɒɡrəfi/ noun [U] (also litho) ► a method of printing using a stone or metal block on which an image has been drawn with a substance that attracts ink: »We provide our customers with a complete solution to their advanced lithography… …   Financial and business terms

  • lithography — 1813, from Ger. Lithographie (c.1804), coined from Gk. lithos stone + graphein to write (see GRAPHY (Cf. graphy)). The original printing surfaces were of stone. Process invented 1796 by Alois Senefelder of Munich (1771 1833). Hence, lithograph a… …   Etymology dictionary

  • lithography —  Lithography  Литография   Процесс, относящийся к плоской печати, при которой печатающие и пробельные элементы печатной формы расположены на одном уровне и обладают способностью избирательного смачивания краской и отталкивания ее. Литография… …   Толковый англо-русский словарь по нанотехнологии. - М.

  • lithography — ► NOUN ▪ the process of printing from a flat metal, formerly stone, surface treated so as to repel the ink except where it is required for printing. DERIVATIVES lithographer noun. ORIGIN from Greek lithos stone …   English terms dictionary

  • lithography — [li thäg′rə fē] n. [ LITHO + GRAPHY] the art or process of printing from a flat stone or metal plate by a method based on the repulsion between grease and water: the design is put on the surface with a greasy material, and then water and printing …   English World dictionary

  • lithography — lithographic /lith euh graf ik/, lithographical, adj. lithographically, adv. /li thog reuh fee/, n. 1. the art or process of producing a picture, writing, or the like, on a flat, specially prepared stone, with some greasy or oily substance, and… …   Universalium

  • lithography — Synonyms and related words: albertype, artist lithography, book printing, chromotypography, chromotypy, chromoxylography, collotype, color printing, coloration, coloring, dyeing, electronography, electrostatic printing, emblazonry, graphic arts,… …   Moby Thesaurus

  • lithography — [[t]lɪθɒ̱grəfi[/t]] N UNCOUNT Lithography is a method of printing in which a piece of stone or metal is specially treated so that ink sticks to some parts of it and not to others. Derived words: lithographic ADJ ADJ n The book s 85 colour… …   English dictionary

  • lithography — litografija statusas T sritis radioelektronika atitikmenys: angl. lithography; lithographic process vok. Lithografie, f rus. литография, f pranc. lithographie, f …   Radioelektronikos terminų žodynas

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”