C0 and C1 control codes

C0 and C1 control codes

Most character encodings, in addition to representing printable characters, may also represent additional information about the text, such as the position of a cursor, an instruction to start a new line, or a message that the text has been received. The C0 and C1 control code sets define control codes for use in text by computer systems that use the ISO/IEC 2022 system of specifying control and graphic characters. The C0 set defines codes in the range 00HEX–1FHEX and the C1 set defines codes in the range 80HEX–9FHEX. The default C0 set was originally defined in ISO 646 (ASCII), while the default C1 set was originally defined in ECMA-48 (harmonized later with ISO 6429). While other C0 and C1 sets are available for specialized applications, they are rarely used.

While the C1 control characters are used in conjunction with the ISO/IEC 8859 series of graphical character sets among others, and are integrated into Unicode, they are rarely used directly, except on specific platforms such as OpenVMS. When they turn up in documents, Web pages, e-mail messages, etc., which are ostensibly in an ISO-8859-n encoding, their code positions generally refer instead to the characters at that position in a proprietary, system-specific encoding such as Windows-1252 or the Apple Macintosh ("MacRoman") character set that use the codes provided for representation of the C1 set with a single 8-bit byte to instead provide additional graphic characters, though this is technically invalid under the ISO encodings. The byte values for the C1 set are also used by the UTF-8 encoding of Unicode. Thus the corresponding control functions are more commonly accessed using the equivalent two byte escape sequence intended for use with systems that have only 7-bit bytes.

Computer applications dealing with plain text only need to concern themselves with the six format effectors (0x08 through 0x0D) in the default C0 set. Only HT, LF, and CR are universally well handled, as BS is often used by applications to indicate deleting the previous character, and VT and FF are often poorly handled by applications that do not assume the use of a fixed character and page size. On the other hand, the C1 control character NEL intended as a single byte substitute for the common two-byte sequence CR LF is often accepted by plain text applications. Very few applications interpret the other C0 and C1 control codes, as they are not needed for plain text.

The ESC code is used extensively to introduce commands to control printing and display devices. For instance in the ANSI escape codes, and PCL, the printer language from Hewlett-Packard printers and compatibles.

NUL has the meaning of "end of string" in C programming language and derivatives such as C++. This meaning is usually not intended in a text stream, but the result is that NUL often cannot be assigned any other meaning.

In addition, some transmission protocols such as ANPA-1312 do make extensive use of control characters SOH, STX, ETX and EOT. Other well known but now nearly obsolete ones are BEL, ACK, NAK and SYN.

The official English language names of some control codes were revised in the most recent edition of the standard for control codes in general (ISO 6429:1992 or ECMA-48:1991) to be neutral with respect to the graphic characters used with them, and to not assume that, as in the Latin script, lines are written on a page from top to bottom and that characters are written on a line from left to right. The abbreviations used were not changed, as the standard had already specified that those would remain unchanged when the standard is translated to other languages. Where the name has been changed, the original name from which the abbreviation was derived is also given in small type in the tables below.

Contents

C0 (ASCII and derivatives)

These are the standard ASCII control codes. If using the ISO/IEC 2022 extension mechanism, they are designated as the active C0 control character set with the octet sequence 0x1B 0x21 0x40 (ESC ! @).

Seq Dec Hex Acro Name C Description
^@ 00 00 NUL Null \0 Originally used to allow gaps to be left on paper tape for edits. Later used for padding after a code that might take a terminal some time to process (e.g. a carriage return or line feed on a printing terminal). Now often used as a string terminator, especially in the C programming language.
^A 01 01 SOH Start of Heading First character of a message header.
^B 02 02 STX Start of text First character of message text, and may be used to terminate the message heading.
^C 03 03 ETX End of Text Often used as a "break" character (Ctrl-C) to interrupt or terminate a program or process.
^D 04 04 EOT End of Transmission Used on Unix to signal end-of-file condition on, or to logout from a terminal.
^E 05 05 ENQ Enquiry Signal intended to trigger a response at the receiving end, to see if it is still present.
^F 06 06 ACK Acknowledge Response to an ENQ, or an indication of successful receipt of a message.
^G 07 07 BEL Bell \a Originally used to sound a bell on the terminal. Later used for a beep on systems that didn't have a physical bell. May also quickly turn on and off inverse video (a visual bell).
^H 08 08 BS Backspace \b Move the cursor one position leftwards. On input, this may delete the character to the left of the cursor. On output, where in early computer technology a character once printed could not be erased, the backspace was sometimes used to generate accented characters in ASCII. For example, à could be produced using the three character sequence a BS ` (0x61 0x08 0x60). This usage is now deprecated and generally not supported. To provide disambiguation between the two potential uses of backspace, the cancel character control code was made part of the standard C1 control set.
^I 09 09 HT Character Tabulation, Horizontal Tabulation \t Position to the next character tab stop.
^J 10 0A LF Line Feed \n On typewriters, printers, and some terminal emulators, moves the cursor down one row without affecting its column position. On Unix, used to mark end-of-line. In MS-DOS, Windows, and various network standards, LF is used following CR as part of the end-of-line mark.
^K 11 0B VT Line Tabulation, Vertical Tabulation \v Position the form at the next line tab stop.
^L 12 0C FF Form Feed \f On printers, load the next page. Treated as whitespace in many programming languages, and may be used to separate logical divisions in code. In some terminal emulators, it clears the screen.
^M 13 0D CR Carriage Return \r Originally used to move the cursor to column zero while staying on the same line. On Mac OS (pre-Mac OS X), as well as in earlier systems such as the Apple II and Commodore 64, used to mark end-of-line. In MS-DOS, Windows, and various network standards, it is used preceding LF as part of the end-of-line mark. The Enter or Return key on a keyboard will send this character, but it may be converted to a different end-of-line sequence by a terminal program.
^N 14 0E SO Shift Out Switch to an alternate character set.
^O 15 0F SI Shift In Return to regular character set after Shift Out.
^P 16 10 DLE Data Link Escape Cause the following octets to be interpreted as raw data, not as control codes or graphic characters. Returning to normal usage would be implementation dependent.
^Q 17 11 DC1 Device Control One (XON) These four control codes are reserved for device control, with the interpretation dependent upon the device they were connected. DC1 and DC2 were intended primarily to indicate activating a device while DC3 and DC4 were intended primarily to indicate pausing or turning off a device. In actual practice DC1 and DC3 (known also as XON and XOFF respectively in this usage) quickly became the de facto standard for software flow control.
^R 18 12 DC2 Device Control Two
^S 19 13 DC3 Device Control Three (XOFF)
^T 20 14 DC4 Device Control Four
^U 21 15 NAK Negative Acknowledge Sent by a station as a negative response to the station with which the connection has been set up. In binary synchronous communication protocol, the NAK is used to indicate that an error was detected in the previously received block and that the receiver is ready to accept retransmission of that block. In multipoint systems, the NAK is used as the not-ready reply to a poll.
^V 22 16 SYN Synchronous Idle Used in synchronous transmission systems to provide a signal from which synchronous correction may be achieved between data terminal equipment, particularly when no other character is being transmitted.
^W 23 17 ETB End of Transmission Block Indicates the end of a transmission block of data when data are divided into such blocks for transmission purposes.
^X 24 18 CAN Cancel Indicates that the data preceding it are in error or are to be disregarded.
^Y 25 19 EM End of medium Intended as means of indicating on paper or magnetic tapes that the end of the usable portion of the tape had been reached.
^Z 26 1A SUB Substitute Originally intended for use as a transmission control character to indicate that garbled or invalid characters had been received. It has often been put to use for other purposes when the in-band signaling of errors it provides is unneeded, especially where robust methods of error detection and correction are used, or where errors are expected to be rare enough to make using the character for other purposes advisable.
^[ 27 1B ESC Escape The Esc key on the keyboard will cause this character to be sent on most systems. It can be used in software user interfaces to exit from a screen, menu, or mode, or in device-control protocols (e.g., printers and terminals) to signal that what follows is a special command sequence rather than normal text. In systems based on ISO/IEC 2022, even if another set of C0 control codes are used, this octet is required to always represent the escape character.
^\ 28 1C FS File Separator Can be used as delimiters to mark fields of data structures. If used for hierarchical levels, US is the lowest level (dividing plain-text data items), while RS, GS, and FS are of increasing level to divide groups made up of items of the level beneath it.
^] 29 1D GS Group separator
^^ 30 1E RS Record Separator
^_ 31 1F US Unit separator
While not technically part of the C0 control character range, the following two characters are defined in ISO/IEC 2022 as always being available regardless of which sets of control characters and graphics characters have been registered. They can be thought of as having some characteristics of control characters.
  32 20 SP Space Space is a graphic character. It has a visual representation consisting of the absence of a graphic symbol. It causes the active position to be advanced by one character position. In some applications, Space can be considered a lowest-level "word separator" to be used with the adjacent separator characters.
^? 127 7F DEL Delete Not technically part of the C0 control character range, this was originally used to mark deleted characters on paper tape, since any character could be changed to all ones by punching holes everywhere. On VT100 compatible terminals, this is the character generated by the key labelled , usually called backspace on modern machines, and does not correspond to the PC delete key.

C1 set

These are most common extended control codes. If using the ISO/IEC 2022 extension mechanism, they are designated as the active C1 control character set with the sequence 0x1B 0x22 0x43 (ESC " C). Individual control functions can be accessed with the 7-bit equivalents 0x1B 0x40 through 0x1B 0x5F (ESC @ through ESC _).

Esc+ Dec Hex Acro Name Description
@ 128 80 PAD Padding Character Listed as XXX in Unicode. Not part of ISO/IEC 6429 (ECMA-48).
A 129 81 HOP High Octet Preset
B 130 82 BPH Break Permitted Here Follows a graphic character where a line break is permitted. Roughly equivalent to a soft hyphen except that the means for indicating a line break is not necessarily a hyphen. Not part of the first edition of ISO/IEC 6429. [1]
C 131 83 NBH No Break Here Follows the graphic character that is not to be broken. Not part of the first edition of ISO/IEC 6429. [1]
D 132 84 IND Index Move the active position one line down, to eliminate ambiguity about the meaning of LF. Deprecated in 1988 and withdrawn in 1992 from ISO/IEC 6429 (1986 and 1991 respectively for ECMA-48).
E 133 85 NEL Next Line Equivalent to CR+LF. Used to mark end-of-line on some IBM mainframes.
F 134 86 SSA Start of Selected Area Used by block-oriented terminals.
G 135 87 ESA End of Selected Area
H 136 88 HTS Character Tabulation Set
Horizontal Tabulation Set
Causes a character tabulation stop to be set at the active position.
I 137 89 HTJ Character Tabulation With Justification
Horizontal Tabulation With Justification
Similar to Character Tabulation, except that instead of spaces or lines being placed after the preceding characters until the next tab stop is reached, the spaces or lines are placed preceding the active field so that preceding graphic character is placed just before the next tab stop.
J 138 8A VTS Line Tabulation Set
Vertical Tabulation Set
Causes a line tabulation stop to be set at the active position.
K 139 8B PLD Partial Line Forward
Partial Line Down
Used to produce subscripts and superscripts in ISO/IEC 6429, e.g., in a printer.
Subscripts use PLD text PLU while superscripts use PLU text PLD..
L 140 8C PLU Partial Line Backward
Partial Line Up
M 141 8D RI Reverse Line Feed
Reverse Index
N 142 8E SS2 Single-Shift 2 Next character invokes a graphic character from the G2 or G3 graphic sets respectively. In systems that conform to ISO/IEC 4873 (ECMA-43), even if a C1 set other than the default is used, these two octets may only be used for this purpose.
O 143 8F SS3 Single-Shift 3
P 144 90 DCS Device Control String Followed by a string of printable characters (0x20 through 0x7E) and format effectors (0x08 through 0x0D), terminated by ST (0x9C).
Q 145 91 PU1 Private Use 1 Reserved for a function without standardized meaning for private use as required, subject to the prior agreement of the sender and the recipient of the data.
R 146 92 PU2 Private Use 2
S 147 93 STS Set Transmit State
T 148 94 CCH Cancel character Destructive backspace, intended to eliminate ambiguity about meaning of BS.
U 149 95 MW Message Waiting
V 150 96 SPA Start of Protected Area Used by block-oriented terminals.
W 151 97 EPA End of Protected Area
X 152 98 SOS Start of String Followed by a control string terminated by ST (0x9C) that may contain any character except SOS or ST. Not part of the first edition of ISO/IEC 6429. [1]
Y 153 99 SGCI Single Graphic Character Introducer Listed as XXX in Unicode. Not part of ISO/IEC 6429.
Z 154 9A SCI Single Character Introducer To be followed by a single printable character (0x20 through 0x7E) or format effector (0x08 through 0x0D). The intent was to provide a means by which a control function or a graphic character that would be available regardless of which graphic or control sets were in use could be defined. Definitions of what the following byte would invoke was never implemented in an international standard. Not part of the first edition of ISO/IEC 6429. [1]
[ 155 9B CSI Control Sequence Introducer Used to introduce control sequences that take parameters.
\ 156 9C ST String Terminator
] 157 9D OSC Operating System Command Followed by a string of printable characters (0x20 through 0x7E) and format effectors (0x08 through 0x0D), terminated by ST (0x9C). These three control codes were intended for use to allow in-band signaling of protocol information, but are rarely used for that purpose.
^ 158 9E PM Privacy Message
_ 159 9F APC Application Program Command
  1. ^ a b c d C1 Control Set of ISO 6429:1983 International Register of Coded Character Sets, Registration Number 77

References


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • elaborated and restricted speech codes — A distinction formulated by Basil Bernstein, a leading figure in the sociology of education, which contrasts the so called formal language of middle class children with the public language of the working class (see his Class, Codes and Control,… …   Dictionary of sociology

  • Control character — In computing and telecommunication, a control character or non printing character is a code point (a number) in a character set, that does not in itself represent a written symbol. It is in band signaling in the context of character encoding. All …   Wikipedia

  • Control-Z — In computing, Control+Z is a control character in ASCII code, also known as the substitute (SUB) character or a keyboard shortcut. Strictly speaking …   Wikipedia

  • Control flow diagram — Example of a so called performance seeking control flow diagram .[1] A control flow diagram (CFD) is a diagram to describe the control flow of a business process, process or program. Contr …   Wikipedia

  • Control-C — This article is about the keyboard shortcut. For the ASCII character, see end of text character. Control C is a common computer command. It is generated by pressing the C key while holding down the …   Wikipedia

  • Control of Asbestos Regulations 2006 — The Control of Asbestos Regulations 2006 came into force in the United Kingdom on 13 November 2006 and brought together a number of other asbestos related pieces of legislation.[1] The pieces of legislation the regulations revoked and replaced… …   Wikipedia

  • Control of Vibration at Work Regulations 2005 — The Control of Vibration at Work Regulations 2005 are set of regulations created under the Health and Safety at Work etc. Act 1974 which came into force in Great Britain on 6 July 2005.[1] The Regulations place a duty on employers to reduce the… …   Wikipedia

  • control code —    A sequence of one or more characters used for hardware control; also known as setup strings or escape sequences. Control codes are used with printers, modems, and displays. Printer control codes often begin with an escape character, followed… …   Dictionary of networking

  • Unicode control characters — Many characters are used to control the interpretation or display of text, but these characters themselves have no visual or spatial representation. For example, the null character (U+0000, aka NUL) is used in C programming application… …   Wikipedia

  • control — 1. (v.) To regulate, restrain, correct, restore to normal. 2. (n.) Ongoing operations or programs aimed at reducing a disease. 3. (n.) Members of a comparison group who differ in disease experience or allocation to a regimen from the subjects of… …   Medical dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”