New South Wales AD60 class locomotive

New South Wales AD60 class locomotive
New South Wales AD60 class
Beyer-Garratt 6012 tops the grade at Cowan with a goods train bound for Sydney.
Power type Steam
Builder Beyer, Peacock and Company
Serial number 7473–7497, 7528–7549
Build date 1952–1954, 1956
Total produced 42, plus 5 for spares
Configuration 4-8-4+4-8-4
Gauge 4 ft 8 12 in (1,435 mm)
Driver diameter 4 ft 7 in (1.397 m)
Weight on drivers 282,000 lb (128 t) or 317,000 lb (144 t)
Locomotive weight 562,000 lb (255 t) or 582,000 lb (264 t)
Fuel type Coal
Fuel capacity 14 long tons (14 t), later 18 long tons (18 t)
Boiler pressure 200 psi (1.38 MPa)
Firegrate area 65 sq ft (6.0 m2)
Heating surface:
Total
3,030 sq ft (281 m2)
Superheater area 750 sq ft (70 m2)
Cylinders Four
Cylinder size 19.25 × 26 in (489 × 660 mm) or 19.875 × 26 in (505 × 660 mm)
Valve gear Walschaerts
Tractive effort 59,560 lbf (264.9 kN) or 63,490 lbf (282.4 kN)
Factor of
adhesion
4.73 or 4.99
Career New South Wales Government Railways
Class AD60
Number in class 42
Number 6001–6042
First run July 1952
Last run 1972
Disposition Four locomotives preserved, one undergoing restoration

The AD60 class was a class of steam locomotives operated by the New South Wales Government Railways in Australia. They were built with the 4-8-4+4-8-4 wheel arrangement. They are commonly considered the most powerful Australian steam locomotives although the NSWGR 57 class was actually slightly more powerful on paper. They did however have a formidable reputation of being able to lift huge trains single handed over steep grades and in difficult conditions.

Contents

Introduction

Steam locomotive 6002 on a trial trip in 1952

This was the first appearance of the Beyer-Garratt type locomotive on the New South Wales Government Railways, although this type of articulated unit had seen considerable use on the narrow gauge lines of other Australian systems for many years. Designed to a light axleload of only 16 tons (16.3 t), they were apparently intended for hauling feeder branch-line services to the main lines where heavier main-line locomotives could continue with the load.

Twenty five locomotives, and subsequently a further twenty five, were ordered from Beyer, Peacock and Company, but following the change of policy in favour of diesel traction, attempts were made to cancel part of the order. Forty two complete locomotives were delivered, together with spare parts equating to approximately five further locomotives. Being composed of three distinct sections with live steam connections between, some assembly was required subsequent to delivery.

Locomotive 6002 was the first to enter service, it emerging in July 1952. All 42 were in traffic by January 1957.

Operation

6042 passes through Woy Woy on the Central Coast on N.S.W.
6003 stands in Molong yard with a westbound goods train.

Whilst there were more powerful Garratts on the narrow gauge lines in Africa, the 60-class were a fairly sizeable locomotive, having a greater tractive effort than any other steam locomotive in Australia with the exception of the New South Wales D57 class locomotive. Some modifications were made subsequent to entering service and they became a most useful locomotive. Crews began to express a preference for operating them.

The coal bunkers were enlarged from 14 to 18 tons capacity. Ventilation of the cabs caused considerable concern. Consequently, the class was banned from working through single-line tunnels, this ban also being in response to the difficulty crews would have climbing out in the event of failure within such tunnels. Amongst attempts to improve cab ventilation, 6011 was experimentally fitted in September, 1952 with a large tube along the front bunker and boiler to funnel air from the front of the locomotive into the cab. It was unsuccessful and was removed in 1955. Some improvement was obtained by running the locomotives coal-bunker first.

Owing to the length and noise of the locomotive, crews found difficulty in hearing warning detonators. To rectify the situation, tubes were fitted to convey the sound from the leading wheels to the cab.

It became apparent that the Garratts would see more service on main lines than on the lighter branch lines. It was decided to increase the tractive effort of a number of the class. This was achieved by enlarging the cylinder diameter and by altering the weight distribution by removing liners from the bogies. This increased the axleload on each of the driving wheels by approximately 2 tons. Thirty locomotives were so treated.

Due to the lack of suitable turning facilities and the extreme difficulty of observing signals when running coal-bunker first, it was decided to fit dual controls to enable the crew to be positioned on the correct side of the cab and facing the direction of travel. This modification was carried out on the 30 locomotives which had increased tractive effort. The buffer beams were marked with a special symbol next to the number to indicate that the locomotive was so fitted.

The train most closely associated with the Garratt locomotives was the ore concentrate train from Broken Hill to Sulphide Junction, near Cockle Creek, known as W44. Another well known duty was the Glenlee, south of Campbelltown, to Rozelle coal traffic which operated prior to electrification of the route and when export coal was handled in Sydney Harbour. When the electrification works were under way and watering facilities had been removed at Campbelltown and Liverpool, 7,000 gallon (31,822 litre) water gins were added between the locomotive and the load. This was the only instance of australian Garratt locomotives running with water gins.

As well as their operation between Molong and Orange on train W44, from early 1966 double-headed Garratts were commonplace between Gosford and Broadmeadow or Port Waratah, the then export coal port near Newcastle. This working lasted right up to the very end of regular steam operations on the N.S.W.G.R. in 1972.

Preservation

6029 is currently under restoration by Australian Railway Historical Society, A.C.T. Div. Information on the restoration can be found here; 6039 and 6042 are with the Dorrigo Steam Railway and Museum and 6040 (the last steam locomotive to enter service with the N.S.W.G.R.) is at the New South Wales Rail Transport Museum which has recived some much need cosmetic work.

Further reading


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • New South Wales 48 class locomotive — New South Wales 48 class GrainCorp s 48203 at the Junee Roundhouse Power type Diesel electric Builder A. E. Goodwin under licence from American Locomotive Company …   Wikipedia

  • New South Wales Z12 class locomotive — 1210 in early 2006 Power type Steam Builder Beyer, Peacock Co. (34), Dübs Co. (26), Atlas Engineering Works (8) Serial number BP 1620–1637, 1675 …   Wikipedia

  • New South Wales D57 class locomotive — New South Wales D57 class 5711 stands in Junee yard ready to head north on 23 September 1961 Power type Steam Builder Clyde Engineering Total produced 25 …   Wikipedia

  • New South Wales X200 class locomotive — New South Wales X200 class (series 1: X201–X206) X203 rests in the up dock at Wagga Wagga while a steam hauled enthusiast special stand at the platform on 19 September 1965. Power type Diesel mechanical Builder NSWGR Chullora Workshops …   Wikipedia

  • New South Wales 41 class locomotive — New South Wales 41 class 4105 heads a Via Crucis special towards Campbelltown, Good Friday 1961 Power type Diesel electric Builder British Thomson Houston, UK Total produced …   Wikipedia

  • New South Wales 46 class locomotive — New South Wales 46 class 4615 locomotive at the Junee Roundhouse Museum Power type Electric Builder Metropolitan Vickers/Beyer Peacock …   Wikipedia

  • New South Wales 442 class locomotive — New South Wales 442 class Silverton Rail liveried locomotive 442s3 Power type Diesel electric Builder A. E. Goodwin Ltd. (34) Commonwealth Engineering (6) Serial number …   Wikipedia

  • New South Wales C36 class locomotive — New South Wales C36 class Preserved 3642 at Central railway station, Sydney, 12 September 2009 Power type Steam Builder NSWGR Eveleigh (10) …   Wikipedia

  • New South Wales 40 class locomotive — New South Wales 40 class Two 40 class head north near Wondabyne Power type Diesel electric Builder Montreal Locomotive Works, Canada Build date October 1951 to Fe …   Wikipedia

  • New South Wales C30T class locomotive — New South Wales C30T class 3047T shunting at Temora, January 1966 Power type Steam Builder Beyer, Peacock Co., NSWGR Eveleigh Workshops Build date 1903–1917 Rebuilder …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”