Pedotransfer function

Pedotransfer function

Pedotransfer function (PTF) is a term used in soil science literature, which can be defined as predictive functions of certain soil properties from other more available, easily, routinely, or cheaply measured properties. This concept arises in soil science as information on soil survey is now highly demanded.

The term "pedotransfer function" was coined by Johan Bouma [cite journal |author=Bouma, J. |year=1989 |title=Using soil survey data for quantitative land evaluation |journal=Advances in Soil Science |volume=9 |pages=177–213 ] as "translating data we have into what we need". The most readily available data come from soil survey, such as field morphology, soil texture, structure and pH. Pedotransfer functions add value to this basic information by translating them into estimates of other more laborious and expensively determined soil properties. These functions fill the gap between the available soil data and the properties which are more useful or required for a particular model or quality assessment. Pedotransfer functions utilize various regression analysis and data mining techniques to extract rules associating basic soil properties with more difficult to measure properties.

Although not formally recognized and named until 1989, the concept of the pedotransfer function has long been applied to estimate soil properties that are difficult to determine. Many soil science agencies have their own (unofficial) "rule of thumb" for estimating difficult-to-measure soil properties. Probably because of the particular difficulty, cost of measurement, and availability of large databases, the most comprehensive research in developing PTFs has been for the estimation of water retention curve and hydraulic conductivity.

History

The first PTF came from the study of Lyman Briggs and McLane (1907). They determined the wilting coefficient, which is defined as percentage water content of a soil when the plants growing in that soil are first reduced to a wilted condition from which they cannot recover in an approximately saturated atmosphere without the addition of water to the soil, as a function of particle-size:

:"Wilting coefficient" = 0.01 "sand" + 0.12 "silt" + 0.57 "clay"

With the introduction of the field capacity (FC) and permanent wilting point (PWP) concepts by Frank Veihmeyer and Arthur Hendricksen (1927), research during the period 1950-1980 attempted to correlate particle-size distribution, bulk density and organic matter content with water content at field capacity (FC), permanent wilting point (PWP), and available water capacity (AWC).

In the 1960s various papers dealt with the estimation of FC, PWP, and AWC, notably in a series of papers by Salter and Williams (1965 etc). They explored relationships between texture classes and available water capacity, which are now known as class PTFs. They also developed functions relating the particle-size distribution to AWC, now known as continuous PTFs. They asserted that their functions could predict AWC to a mean accuracy of 16 %.

In the 1970s more comprehensive research using large databases was developed. A particularly good example is the study by Hall et al. (1977) from soil in England and Wales; they established field capacity, permanent wilting point, available water content, and air capacity as a function of textural class, and as well as deriving continuous functions estimating these soil-water properties. In the USA, Gupta and Larson (1979) developed 12 functions relating particle-size distribution and organic matter content to water content at potentials ranging from -4 kPa to -1500 kPa.

With the flourishing development of models describing soil hydraulic properties and computer modelling of soil-water and solute transport, the need for hydraulic properties as inputs to these models became more evident. Clapp and Hornberger (1978) derived average values for the parameters of a power-function water retention curve, sorptivity and saturated hydraulic conductivity for different texture classes. In probably the first research of its kind, Bloemen (1977) derived empirical equations relating parameters of the Brooks and Corey hydraulic model to particle-size distribution.

Jurgen Lamp and Kneib (1981) from Germany introduced the term pedofunction, while Bouma and van Lanen (1986) used the term transfer function. To avoid confusion with the term "transfer function" used in soil physics and in many other disciplines, Johan Bouma (1989) later called it "pedotransfer function". (A personal anecdote hinted that Arnold Bregt from Wageningen University suggested this term).

Since then, the development of hydraulic PTFs has become a boom research topic, first in the US and Europe, South America, Australia and all over the world.

Although most PTFs have been developed to predict soil hydraulic properties, they are not restricted to hydraulic properties. PTFs for estimating soil physical, mechanical, chemical and biological properties have also been developed.

oftware

There are several available programs that aid determining hydraulic properties of soils using pedotransfer functions, among them are:
* [http://www.sipeaa.it/ASP/ASP2/SOILPAR.asp SOILPAR] – By Acutis and Donatelli [cite journal|author=Acutis, M., and Donatelli, M. |year=2003 |title=SOILPAR 2.00: software to estimate soil hydrological parameters and functions |journal=European Journal of Agronomy |volume=18 |pages=373–377 |doi=10.1016/S1161-0301(02)00128-4]
* [http://www.ars.usda.gov/Services/docs.htm?docid=8953 ROSETTA] – By Schaap et al. [cite journal|author=Schapp, M.G., Leij, F.J., and van Genuchten, M.Th. |year=2001 |title=rosetta: A computer program for estimating soil hydraulic parameters with hierarchical pedotransfer functions |journal=Journal of Hydrology |volume=251 |issue=3 |pages=163–176 |doi=10.1016/S0022-1694(01)00466-8] of the USDA, uses artificial neural networks

oil inference systems

McBratney et al. (2002) introduced the concept of a soil inference system, SINFERS, where pedotransfer functions are the knowledge rules for soil inference engines. A soil inference system takes measurements with a given level of certainty (source) and by means of logically linked pedotransfer functions (organiser) infers data that is not known with minimal inaccuracy (predictor).

See also

* Moisture equivalent
* Nonlimiting water range

References

* Bloemen, G.W., 1977. Calculation of capillary conductivity and capillary rise from grainsize distribution. ICW Wageningen nota no. 952, 962, 990, 1013.
* Bouma, J., van Lanen, H.A.J., 1986. Transfer functions and threshold values: from soil characteristics to land qualities. In: Quantified land evaluation procedures, Proceedings of the international workshop on quantified land evaluation procedures, 27 April - 2 May 1986. Washington, DC.
* Briggs, L.J., McLane, J.W., 1907. The moisture equivalent of soils. USDA Bureau of Soils Bulletin 45, 1-23.
* Clapp, R.B., Hornberger, G.M., 1978. Empirical equations for some soil hydraulic properties. Water Resources Research 14, 601-604.
* Gupta, S.C., Larson. W.E., 1979. Estimating soil water retention characteristics from particle size distribution, organic matter content, and bulk density. Water Resources Research 15, 1633-1635.
* Hall, D.G., Reeve, M.J., Thomasson, A.J., Wright, V.F., 1977. Water Retention, Porosity and Density of Field Soils. Technical Monograph No. 9. Soil Survey of England and Wales, Harpenden.
* Lamp, J., Kneib, W., 1981. Zur quantitativen Erfassung und Bewertung von Pedofunktionen. Mitteilungen der Deutschen Bodenkundlichen Gesellschaft 32, 695-711.
* McBratney, A.B., Minasny, B., Cattle, S.R., Vervoort, R.W., 2002. From pedotransfer functions to soil inference systems. Geoderma 109, 41-73.
* Salter, P.J., Williams, J.B., 1965. The influence of texture on the moisture characteristics of soils. I A critical comparison for determining the available water capacity and moisture characteristics curve of a soil. Journal of Soil Science 16, 1-15.


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Hydraulic conductivity — Hydraulic conductivity, symbolically represented as K, is a property of vascular plants, soil or rock, that describes the ease with which water can move through pore spaces or fractures. It depends on the intrinsic permeability of the material… …   Wikipedia

  • Soil inference system — Inference is a process of deriving logical conclusion from the basis of empirical evidence and prior knowledge rather than on the basis of direct observation. Soil Inference System (SINFERS) is the term proposed by McBratney et al. (2002) as a… …   Wikipedia

  • Soil functions — are general capabilities of soils that are important for various agricultural, environmental, nature protection, landscape architecture and urban applications. Six key soil functions are: [cite book | author = Blum, WEH | date = 1993 | title =… …   Wikipedia

  • Soil science — is the study of soil as a natural resource on the surface of the earth including soil formation, classification and mapping; physical, chemical, biological, and fertility properties of soils; and these properties in relation to the use and… …   Wikipedia

  • PTF — stands for: * Part Time Flexible, a type of mail carrier in the United States. * Pass Through Flux * Pedotransfer function * Phase Transfer Function * Police Task Force, former name of the Police Tactical Unit of the Singapore Police Force *… …   Wikipedia

  • Lyman James Briggs — which was named in his honor. He worked as a civil servant for the U.S. Government for 49 years.Personal and academic historyLyman James Briggs was born on a farm in Assyria, Michigan near Battle Creek, Michigan. He was the eldest of two brothers …   Wikipedia

  • Field capacity — is the amount of soil moisture or water content held in soil after excess water has drained away and the rate of downward movement has materially decreased, which usually takes place within 2–3 days after a rain or irrigation in pervious soils of …   Wikipedia

  • Moisture equivalent — is proposed by Lyman Briggs and McLane (1910) as a measure of field capacity for fine textured soil materials. Moisture equivalent is defined as the percentage of water which a soil can retain in opposition to a centrifugal force 1000 times that… …   Wikipedia

  • Permanent wilting point — (PWP) or wilting point (WP) is defined as the minimal point of soil moisture the plant requires not to wilt. If moisture decreases to this or any lower point a plant wilts and can no longer recover its turgidity when placed in a saturated… …   Wikipedia

  • Nonlimiting water range — The Non limiting water range (NLWR) represents the range of water content in the soil where limitations to plant growth (such as water potential, air filled porosity, or soil strength) are minimal. John Letey (1985) from UC Riverside introduced… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”