Fermi energy

Fermi energy

The Fermi energy is a concept in quantum mechanics usually referring to the energy of the highest occupied quantum state in a system of fermions at absolute zero temperature. This article requires a basic knowledge of quantum mechanics.

Note that the term "Fermi energy" is often, confusingly, used to describe a different but closely-related concept, the chemical potential. [The use of the term "Fermi energy" to describe the chemical potential is widespread in books and papers on semiconductor physics. As just one example, Pankove, "Optical Processes in Semiconductors", ISBN 0486602753 (1971), states: "The Fermi level is the energy at which the expectation of finding a state occupied by an electron is 1/2." (page 6)] The Fermi energy and chemical potential are the same at absolute zero, but differ at other temperatures, as described below.

Introduction

Context

In quantum mechanics, a group of particles known as fermions (for example, electrons, protons and neutrons are fermions) obey the Pauli exclusion principle, which states that no two fermions can occupy the same quantum state. The states are labeled by a set of quantum numbers. In a system containing many fermions (like electrons in a metal) each fermion will have a different set of quantum numbers. To determine the lowest energy a system of fermions can have, we first group the states in sets with equal energy and order these sets by increasing energy. Starting with an empty system, we then add particles one at a time, consecutively filling up the unoccupied quantum states with lowest-energy. When all the particles have been put in, the Fermi energy is the energy of the highest occupied state.What this means is that even if we have extracted all possible energy from a metal by cooling it down to near absolute zero temperature (0 kelvins), the electrons in the metal are still moving around; the fastest ones would be moving at a velocity that corresponds to a kinetic energy equal to the Fermi energy. This is the Fermi velocity. The Fermi energy is one of the important concepts of condensed matter physics. It is used, for example, to describe metals, insulators, and semiconductors. It is a very important quantity in the physics of superconductors, in the physics of quantum liquids like low temperature helium (both normal and superfluid 3He), and it is quite important to nuclear physics and to understand the stability of white dwarf stars against gravitational collapse.

Advanced context

The Fermi energy ("EF") of a system of non-interacting fermions is the increase in the ground state energy when exactly one particle is added to the system. It can also be interpreted as the maximum energy of an individual fermion in this ground state. The chemical potential at zero temperature is equal to the Fermi energy.

Illustration of the concept for a one dimensional square well

The one dimensional infinite square well is a model for a one dimensional box. It is a standard model-system in quantum mechanics for which the solution for a single particle is well known. The levels are labeled by a single quantum number "n" and the energies are given by:E_n = frac{hbar^2 pi^2}{2 m L^2} n^2 ,.Suppose now that instead of one particle in this box we have N particles in the box and that these particles are fermions with spin 1/2. Then only two particles can have the same energy i.e. two particles can have the energy of E_1=frac{hbar^2 pi^2}{2 m L^2}, or two particles can have energy E_2=4 E_1 and so forth. The reason that two particles can have the same energy is that a spin-1/2 particle can have a spin of 1/2 (spin up) or a spin of -1/2 (spin down), leading to two states for each energy level. When we look at the total energy of this system, the configuration for which the total energy is lowest (the ground state), is the configuration where all the energy levels up to n=N/2 are occupied and all the higher levels are empty. The Fermi energy is therefore :E_f=E_{N/2}=frac{hbar^2 pi^2}{2 m L^2} (N/2)^2 ,.

The three-dimensional case

The three-dimensional isotropic case is known as the fermi sphere.

Let us now consider a three-dimensional cubical box that has a side length "L" (see infinite square well). This turns out to be a very good approximation for describing electrons in a metal.The states are now labeled by three quantum numbers nx, ny, and nz. The single particle energies are ::E_{n_x,n_y,n_z} = frac{hbar^2 pi^2}{2m L^2} left( n_x^2 + n_y^2 + n_z^2 ight) , ::nx, ny, nz are positive integers.There are multiple states with the same energy, for example E_{100}=E_{010}=E_{001}. Now let's put N non-interacting fermions of spin 1/2 into this box. To calculate the Fermi energy, we look at the case for N is large.

If we introduce a vector vec{n}={n_x,n_y,n_z} then each quantum state corresponds to a point in 'n-space' with Energy :E_{vec{n = frac{hbar^2 pi^2}{2m L^2} |vec{n}|^2 ,The number of states with energy less than Ef is equal to the number of states that lie within a sphere of radius |vec{n}_f| in the region of n-space where nx, ny, nz are positive. In the ground state this number equals the number of fermions in the system.:N =2 imesfrac{1}{8} imesfrac{4}{3} pi n_f^3 ,

the factor of two is once again because there are two spin states, the factor of 1/8 is because only 1/8 of the sphere lies in the region where all n are positive.We find:n_f=left(frac{3 N}{pi} ight)^{1/3} so the Fermi energy is given by:E_f =frac{hbar^2 pi^2}{2m L^2} n_f^2 :: = frac{hbar^2 pi^2}{2m L^2} left( frac{3 N}{pi} ight)^{2/3}

Which results in a relationship between the fermi energy and the number of particles per volume (when we replace L2 with V2/3):::

The elimination of L in favor of V::L^2 = V^{frac{2}{3

::

Typical fermi energies

White dwarfs

Stars known as White dwarfs have mass comparable to our Sun, but have a radius about 100 times smaller. The high densities means that the electrons are no longer bound to single nuclei and instead form a degenerate electron gas. The number density of electrons in a White dwarf are on the order of 1036 electrons/m3. This means their fermi energy is:::E_f = frac{hbar^2}{2m_e} left( frac{3 pi^2 (10^{36})}{1 mathrm{m}^3} ight)^{2/3} approx 3 imes 10^5 mathrm{eV} ,

Nucleus

Another typical example is that of the particles in a nucleus of an atom. The radius of the nucleus is roughly:::R = left(1.25 imes 10^{-15} mathrm{m} ight) imes A^{1/3}:where "A" is the number of nucleons.

The number density of nucleons in a nucleus is therefore:::n = frac{A}{egin{matrix} frac{4}{3} end{matrix} pi R^3 } approx 1.2 imes 10^{44} mathrm{m}^{-3}

Now since the fermi energy only applies to fermions of the same type, one must divide this density in two. This is because the presence of neutrons does not affect the fermi energy of the protons in the nucleus, and vice versa.

So the fermi energy of a nucleus is about:::E_f = frac{hbar^2}{2m_p} left( frac{3 pi^2 (6 imes 10^{43})}{1 mathrm{m}^3} ight)^{2/3} approx 30 imes 10^6 mathrm{eV} = 30 mathrm{MeV}

The radius of the nucleus admits deviations around the value mentioned above, so a typical value for the fermi energy usually given is 38 MeV.

Fermi level

The Fermi level is the highest occupied energy level at absolute zero, that is, all energy levels up to the Fermi level are occupied by electrons. Since fermions cannot exist in identical energy states ("see the exclusion principle"), at absolute zero, electrons pack into the lowest available energy states and build up a "Fermi sea" of electron energy states. [http://hyperphysics.phy-astr.gsu.edu/hbase/solids/fermi.html] In this state (at 0 K), the average energy of an electron is given by:

:E_{av} = frac{3}{5} E_f where E_f is the Fermi energy.

The Fermi momentum is the momentum of fermions at the Fermi surface. The "Fermi momentum" is given by::p_F = sqrt{2 m_e E_f} where m_e is the mass of the electron.

This concept is usually applied in the case of dispersion relations between the energy and momentum that do not depend on the direction. In more general cases, one must consider the Fermi energy.

The Fermi velocity is the velocity of fermions at the Fermi surface. It is defined by:: V_f = sqrt{frac{2 E_f}{m_e where m_e is the mass of the electron.

Below the Fermi temperature, a substance gradually expresses more and more quantum effects of cooling. The Fermi temperature is defined by:: T_f = frac{E_f}{k} where "k" is the Boltzmann constant.

Quantum mechanics

According to quantum mechanics, fermions -- particles with a half-integer spin, usually 1/2, such as electrons -- follow the Pauli exclusion principle, which states that multiple particles may not occupy the same quantum state. Consequently, fermions obey Fermi-Dirac statistics. The ground state of a non-interacting fermion system is constructed by starting with an empty system and adding particles one at a time, consecutively filling up the lowest-energy unoccupied quantum states. When the desired number of particles has been reached, the Fermi energy is the energy of the highest occupied molecular orbital (HOMO). Within conductive materials, this is equivalent to the lowest unoccupied molecular orbital (LUMO); however, within other materials there will be a significant gap between the HOMO and LUMO on the order of 2-3 eV.

Pinning of Fermi level

When the energy density of surface states is very high (>1012/cm2), the position of the Fermi level is determined by the neutral level of the Surface states and becomes independent of Work Function variations.

Free electron gas

In the free electron gas, the quantum mechanical version of an ideal gas of fermions, the quantum states can be labeled according to their momentum. Something similar can be done for periodic systems, such as electrons moving in the atomic lattice of a metal, using something called the "quasi-momentum" or "crystal momentum" (see Bloch wave). In either case, the Fermi energy states reside on a surface in momentum space known as the Fermi surface. For the free electron gas, the Fermi surface is the surface of a sphere; for periodic systems, it generally has a contorted shape (see Brillouin zones). The volume enclosed by the Fermi surface defines the number of electrons in the system, and the topology is directly related to the transport properties of metals, such as electrical conductivity. The study of the Fermi surface is sometimes called Fermiology. The Fermi surfaces of most metals are well studied both theoretically and experimentally.

The Fermi energy of the free electron gas is related to the chemical potential by the equation

:mu = E_F left [ 1- frac{pi ^2}{12} left(frac{kT}{E_F} ight) ^2 - frac{pi^4}{80} left(frac{kT}{E_F} ight)^4 + cdots ight]

where "E"F is the Fermi energy, "k" is the Boltzmann constant and "T" is temperature. Hence, the chemical potential is approximately equal to the Fermi energy at temperatures of much less than the characteristic Fermi temperature "EF"/"k". The characteristic temperature is on the order of 105 K for a metal, hence at room temperature (300 K), the Fermi energy and chemical potential are essentially equivalent. This is significant since it is the chemical potential, not the Fermi energy, which appears in Fermi-Dirac statistics.

ee also

* fermi gas
* Fermi statistics
* semiconductors
* electrical engineering
* electronics
* thermodynamics
* Quasi Fermi level

References

*cite book | author=Kroemer, Herbert; Kittel, Charles | title=Thermal Physics (2nd ed.) | publisher=W. H. Freeman Company | year=1980 | id=ISBN 0-7167-1088-9
* [http://hyperphysics.phy-astr.gsu.edu/hbase/tables/fermi.html Table of fermi energies, velocities, and temperatures for various elements] .
* [http://physicsweb.org/articles/world/15/4/7 a discussion of fermi gases and fermi temperatures] .

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Fermi Energy —  Fermi Energy  Энергия Ферми   Значение энергии, ниже которого все состояния системы частиц, подчиняющихся статистике Ферми Дирака (фермионов), при абсолютном нуле температуры заняты. Для идеального вырожденного газа фермионов энергия Ферми… …   Толковый англо-русский словарь по нанотехнологии. - М.

  • Fermi energy — Fermio lygmens energija statusas T sritis Standartizacija ir metrologija apibrėžtis Didžiausioji galima fermionų sistemos užpildytosios būsenos energijos vertė absoliučiojo nulio temperatūroje. atitikmenys: angl. Fermi energy; Fermi level energy… …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

  • Fermi energy — Fermio lygmens energija statusas T sritis fizika atitikmenys: angl. Fermi energy; Fermi level energy vok. Fermi Niveau Energie, f rus. уровень Ферми, m; фермиевская энергия, f pranc. énergie du niveau de Fermi, f …   Fizikos terminų žodynas

  • Fermi energy — Fermio energija statusas T sritis radioelektronika atitikmenys: angl. Fermi energy vok. Fermi Energie, f rus. фермиевская энергия, f; энергия Ферми, f pranc. énergie de Fermi, f …   Radioelektronikos terminų žodynas

  • Fermi energy level — Fermio energijos lygmuo statusas T sritis fizika atitikmenys: angl. Fermi energy level vok. Fermi Energieniveau, n rus. уровень энергии Ферми, m; энергетический уровень Ферми, m pranc. niveau d’énergie de Fermi, m …   Fizikos terminų žodynas

  • Fermi energy — noun The highest energy of a particle that is part of a many particle system of identical fermions in its ground state …   Wiktionary

  • Fermi energy — Смотри энергия Ферми …   Энциклопедический словарь по металлургии

  • Fermi–Dirac statistics — Statistical mechanics Thermodynamics · …   Wikipedia

  • Fermi surface — In condensed matter physics, the Fermi surface is an abstract boundary useful for predicting the thermal, electrical, magnetic, and optical properties of metals, semimetals, and doped semiconductors. The shape of the Fermi surface is derived from …   Wikipedia

  • Fermi gas — A Fermi gas, or Free electron gas, is a collection of non interacting fermions. It is the quantum mechanical version of an ideal gas, for the case of fermionic particles. Electrons in metals and semiconductors and neutrons in a neutron star can… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”