Cleaving axe

Cleaving axe

A cleaving axe or cleaver is a form of axe used within green woodworking. As the name suggests, it is used for cleaving, the practice of splitting green wood lengthways. Cleaving is used to turn a log into more usable wedge-shaped billets, before working it further into the finished product.

A cleaving axe resembles a typical small axe of around 2 lb. The side profile is that of the modern wedge axe (now by far the most common form), rather than a more traditional forged and welded shape, such as a Kent axe or hatchet.[1] The edge is of medium length, almost straight with just a slight camber, and symmetrical top and bottom. A section through the edge is that of a simple splitting wedge.[2] The edge itself does not need to be sharp: cleaving relies more on wedge action than chopping with an edge. The section of the axe should be triangular though, with flat sides, rather than the deeply hollow-sided forged and welded axes, or the modern convex-sided "apple pip" axe grind.[3] Nor should the edge be ground at a bevel. The work of using the axe, and its ability to split cleanly, depends on having flat sides with the minimum of friction, rather than all the force of the timber being concentrated on one protruding line.[2] The handle is straight and fairly short, around 18 inches, as the cleaving axe is only held, not swung.[2] As the axe head must penetrate fully into the wood, the poll[4] is minimal, narrower than the axe cheeks, and is never used for pounding other tools, lest it damage or mushroom the head.[5]

Contents

Cleaving

Cleaving is done by driving a wedge between the fibres of a log, so as to split fibres apart along their weakest path.[6] This work may appear strenuous, but is far less effort than rip sawing by hand. It is first done radially, to split the log into wedged segments. Timbers with medullary rays, such as oak, may be hard to split through these radial rays and so careful alignment is made to split between them. Segments are halved symmetrically at each step, as this encourages them to split more evenly than attempting to cleave off thin sheets repeatedly from one end.[7]

Cleaving usually begins from one end of a log, by driving the cleaving axe or a splitting wedge into the end of the log.[6] It is driven further by use of a mallet or froe club. As always, a hammer should be avoided when striking a hard steel tool, as it damages the tool by mushrooming it and may even cause cracking. A short log may be split entirely from one end, a long log will require an initial split to be extended along the log by the use of axe or wedges, driven in from the sides.[7] Short logs are cleaved vertically, long ones horizontally.

The ability to use several tools at once makes the use of an axe and wedges capable of cleaving far heavier logs than a froe. The froe must also be used gradually from one end, the axe (or wedges) may enter the log from the side. The froe does however have a wider blade, and so may give a more precisely flat surface when cleaving wide timber, such as for roofing shingles. It is common to start cleaving a log with an axe, finish the first heavy splits with wedges, then use a froe to make the finished items.

Related tools

  • Billhook, used for light cleaving of withies.
  • Froe, a precise tool for cleaving wide sections.
  • Side knife, a light froe.
  • Splitting wedge, used in multiple, for initial heavy splitting.

Splitting axes

Splitting mauls are heavy axes (6 lbs or more) used for rough splitting of firewood. They have small heads in terms of edge length, but are heavy as they are especially wide across the cheeks and have a steep taper for rapid splitting.[8] To provide the power necessary, they have full-length shafts and are used with a full swing at the log. Splitting is usually done to logs that are already sawn to length and so they may be split vertically. To split longer logs, wedges are driven with the heavy poll of this maul, giving its alternative name of "hammer-poll axe".[8]

Splitting axes are inconsistently described. Some are cleaving axes, used for green woodworking.[5] Others are a crude firewood-splitting axe, but without the heavy poll of a maul. Light axes, unless specifically intended for it, should never be used for hammering with their poll.

References

  1. ^ Abbott, Mike (1998). Green woodwork. Guild of Master Craftsman. pp. 44. ISBN 0946819181. 
  2. ^ a b c Abbott, Green woodwork, p. 42
  3. ^ Lee, Leonard (2008). The Complete Guide to Sharpening. Taunton Press. ISBN 1561581259. 
  4. ^ The poll is the rear face of an axe, sometimes flat but only rarely intended for hammering.
  5. ^ a b The Axe Book. Gränsfors Bruks AB (Swedish axe manufacturer). 2005. pp. 9. ISBN 91-975532-6-3. 
  6. ^ a b Edlin, H.L. (1949). Woodland crafts in Britain. Batsford. pp. 13–14. 
  7. ^ a b Abbott, Green woodwork, p. 77
  8. ^ a b The Axe Book, p. 10

Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Axe — The axe, or ax, is an implement that has been used for millennia to shape, split and cut wood, harvest timber, as a weapon and a ceremonial or heraldic symbol. The axe has many forms and specialized uses but generally consists of an axe head with …   Wikipedia

  • axe — /æks / (say aks) noun (plural axes) 1. an instrument with a bladed head on a handle or helve, used for hewing, cleaving, chopping, etc. 2. Colloquial a guitar, usually electric. –verb (t) (axed, axing) 3. to shape or trim with an axe. 4.… …  

  • Dane Axe — Replica Danish axe head, Petersen Type L or Type M, based on original from Tower of London The Dane Axe is an early type of battle axe, primarily used during the transition between the European Viking Age and early Middle Ages. Other names for… …   Wikipedia

  • Danish axe — The Danish axe is an early type of polearm, primarily used during the transition between the European Viking Age and early Middle Ages. Other names for the weapon include Dane axe, English long axe, Viking axe, and hafted axe. ConstructionMost… …   Wikipedia

  • Splitting maul — Woodsplitting maul Other names Wood maul Wood mall Block Buster (Typically used throughout Australia and New Zealand) Classification Hand tool Related Sledge hammer …   Wikipedia

  • Discworld gods — See also: Discworld (world)#Magic Some of the Discworld gods at Dunmanifestin. L R: Sessifet (off left),Offler, Flatulus (behind Offler), Fate, Urika, Blind Io, Libertina, The Lady, Bibulous, Patina (behind Bibulous), Topaxi (in front of… …   Wikipedia

  • Froe — A froe is a tool for cleaving wood by splitting it along the grain. A froe is used by hammering its blade into the end of a piece of wood in the direction of the grain, then twisting the blade in the wood by rotating the haft (handle). A froe… …   Wikipedia

  • List of Middle-earth weapons and armour — Middle earth portal Weapons and armour of Middle earth are found in J. R. R. Tolkien s Middle earth fantasy writings, such as The Hobbit, The Lord of the Rings and The Silmarillion. Wa …   Wikipedia

  • Monkey Magic (TV series) — This article is about the 1990s animated television series, for the live action TV series, sometimes known as Monkey Magic!, please see Monkey (TV series) Monkey Magic Genre Action, Adventure TV anime Directed by Tameo Kohanawa Studio …   Wikipedia

  • Military history of Ancient Egypt — The Ancient Egyptians were a people who lived in northeastern Africa from about 3150 BC to 31 BC The civilization stretched from the Nile Delta to Jebel Barkal, a mountain in Nubia. Historians divide Egyptian history into to three periods: the… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”