Coal-water slurry fuel


Coal-water slurry fuel

Coal-water slurry fuel (CWSF or CWS or CWF) is a fuel which consists of fine coal particles suspended in water. Presence of water in CWS reduces harmful emissions into the atmosphere, makes the coal explosion-proof, makes use of coal equivalent to use of liquid fuel (e.g. heating oil), and gives other benefits (see below).

CWS consists of 55-70% of fine dispersed coal particles and 30-45% of water. Coal particles suitable for diesel fuel replacement typically need to be less than 20 micrometres in diameter.

Contents

Uses

CWS can be used in place of oil and gas in any size of heating and power station. CWS is suitable for existing gas, oil, and coal boilers. During the last 30 years the US Department Of Energy (DOE.Gov) has been researching the use of Coal Water Fuels in boilers, Gas Turbines and Diesel Engines. When used in Low Speed Diesels the CWF has resulted in thermal efficiency rating that rivals Combined Cycle Gas Turbines that burn Natural Gas as their primary fuel. It has been suggested that slightly modified modular Diesel engine power plants that burn CWF are economically competitive with Natural Gas fired peaking electric plants in the 10 MWe to 100 MWe range of power supply.

Benefits

The presence of water in CWS reduces harmful emissions into the atmosphere and makes the coal explosion-proof. By converting the coal into a liquid form, delivery and dispensing of the fuel can be simplified.

Because of the relatively low cost of coal when compared to other energy sources, CWS is a very competitive alternative to heating oil and gas. Depending on geographical area the price per unit energy of CWS may be 30% to 70% lower than the equivalent oil or gas.

Low emissions and low BTU cost (Gcal or MWh) make CWS very cost effective and environmental friendly fuel for heat and power generation.

One side benefit of the Coal Water Slurry production process is the separation of non carbon material mixed with the coal before treatment. This results in a reduction of ash content to as low as 2% for the treated Coal Water Slurry Fuel, making it a viable alternative to Diesel fuel #2 for use in large stationary engines or Diesel Electric Locomotives.

History

Toward the end of 1950s, the Soviet Union started the development of new ways to utilize coal sludge for power generation. Two major problems of sludge transportation and sludge combustion were solved during the series of experiments and research.

Ball mills pulverize and mix the coal sludge with water producing coal-water slurry (mix of liquids and hard particles). CWS produced by milling the sludge and/or regular coal near the coal mine near Belovo (Siberia, Russia) was transported through the pipeline to Novosibirsk (Siberia, Russia), a distance of 262 km. Three intermediate pump-stations were installed for pumping CWS to Novosibirskaya TEC-5 in Novosibirsk.

The unique difference of project Belovo-Novosibirsk uses CWS directly for combustion in steam boilers at a rate of 1340 t per hour. In other world projects CWS was used only for transportation which was followed then with drying of CWS before the combustion of the pulverized coal.

A project at Belovo-Novosibirsk was started in 1989 but delayed and finished in 1993 due to economic disruptions caused by the transition from the Soviet Union to Russia. A drop in oil and gas prices made the use of CWS coal combustion less economical.

Since the 2004 Russia has continued the development and implementation of CWS technology for heating stations (for district heating) and power stations (WATERCOAL, LiquidCoal).

Technology

Preparing of CWS

WCF preparation consists of three major stages:

  • Prior crushing till 10 to 25 micrometers or 60 to 65 micrometers
  • Wet milling and homogenization
  • Intermediate storage

Standard crushers could be used for prior crushing of raw coal. On the wet milling and homogenization stage coal is milling and mixing with water and (if required) some additives. Group of companies Amalthea (Russia) developed high efficient and low consumption method of wet milling and homogenization what reduces energy expenses for production of each ton of CWS plus avoids using of additives which makes Coal Slurry stable.

Raw for CWS preparation

Coal of almost any types could be used as a raw for WCF: lignite, flame and gas flame coals, anthracites. Brown coal could also be used. Coal waste slurries could be used for preparing WCF Desirable ash:

  • Less than aprox. 10% if using on gas/oil boilers
  • No limits if using in coal boilers
Type of coal Possibility
Brown coals (lignites) possible, tested and confirmed
Flame coal (V=40…45%) well developed[1]
Gas flame coal, gas coal (V=28…40%) well developed
Fat coal – anthracite (V=7…28%) possible, tested and confirmed

Combustion of CWS

Combustion of CWS in a steam boiler. Coal particles (<250mkm) are visible. Murmanskaya region, Russia. Full video

CWF can be used in several different applications, in the largest particle form it is a viable substitute for heavy grade fuel oils used to produce steam in boilers such as Diesel #6, Bunker C and Bunker D residual oil fuels. Additionally when the particle size is 80 micrometres or less the CWF can be used as a cofuel or substitute fuel in diesel engines. Low speed marine or modular powerplant diesels can operate on pure CWF. Medium speed diesels such as locomotive engines sometimes need a co-injection of Diesel #2 which acts as an ignition source for the CWF. For gas turbine testing CWF particles five to ten micrometres in size have been used to demonstrate useful substitution for petroleum or natural gas in combined cycle gas turbine powerplant applications.

The smaller the particle size the more versatile the CWF is for application, however the finer the particle size the more difficult it is to manufacture.

References

External links


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Coal — Sedimentary Rock Anthracite coal Composition Primary carbon Secondary hydrogen, sulfur …   Wikipedia

  • coal utilization — Introduction        combustion of coal or its conversion into useful solid, gaseous, and liquid products. By far the most important use of coal is in combustion, mainly to provide heat to the boilers of electric power plants. Metallurgical coke… …   Universalium

  • coal mining — Coal was very important in the economic development of Britain. It was used as fuel in the factories built during the Industrial Revolution and continued to be important until the 1980s. The main coalfields are in north east England, the north… …   Universalium

  • Coal pipeline — Coal pipelines are pipelines used to transport coal from where it is mined to where it is consumed. For very short distances, large trucks are used to transport coal, but trains and barges are preferred for long distances. In some cases it is… …   Wikipedia

  • Coal mining — Men leaving a UK colliery at the close of a shift Surface coal mining in Wyo …   Wikipedia

  • Coal upgrading technology — refers to a class of technologies developed to remove moisture and certain pollutants from low rank coals such as sub Bituminous coal and lignite (brown coal) and raise their calorific values. Companies located in Australia, Germany and the… …   Wikipedia

  • Coal breaker — A coal breaking plant, depicted on a postcard in 1907. A coal breaker was a coal processing plant which broke coal into various useful sizes. Coal breakers also removed impurities from the coal (typically slate) and deposited them into a culm… …   Wikipedia

  • Clean coal technology — This article is about technological innovations related to clean coal. For clean coal as a general concept, see clean coal. Clean coal technology is a collection of technologies being developed to reduce the environmental impact of coal energy… …   Wikipedia

  • Clean coal — Historically[1] used to refer to technologies for reducing emissions of ash, sulfur, and heavy metals from coal combustion; the term is now commonly used to refer to carbon capture and storage (CCS) technology. Clean coal is an umbrella term used …   Wikipedia

  • Fossil fuel power plant — A fossil fuel power plant burns fossil fuels such as coal, natural gas or petroleum (oil) to produce electricity.Fossil fuel power plants are designed on a large scale for continuous operation. In many countries, such plants provide most of the… …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.