Vapor–liquid separator

Vapor–liquid separator
A typical vapor–liquid separator including commonly a de-entrainment pad and sometimes an inlet distributor

A vapor–liquid separator is a device used in several industrial applications to separate a vapor–liquid mixture.

For the common variety, gravity is utilized in a vertical vessel to cause the liquid to settle to the bottom of the vessel, where it is withdrawn.[1][2][3][4]

In low gravity environments such as a space station, a common liquid separator will not function because gravity is not usable as a separation mechanism. In this case, centrifugal force needs to be utilized in a spinning centrifugal separator to drive liquid towards the outer edge of the chamber for removal. Gaseous components migrate towards the center. The gas outlet may itself be surrounding by a spinning mesh screen or grating, so that any liquid that does approach the outlet strikes the grating, is accelerated, and thrown away from the outlet.

Contents

Method of operation

The vapor travels gas outlet at a design velocity which minimizes the entrainment of any liquid droplets in the vapor as it exits the vessel.

The feed to a vapor–liquid separator may also be a liquid that is being partially or totally flashed into a vapor and liquid as it enters the separator.

A vapor–liquid separator may also be referred to as a flash drum, knock-out drum, knock-out pot, compressor suction drum or compressor inlet drum.

When used to remove suspended water droplets from streams of air, a vapor-liquid separator is often called a demister.

Liquid level monitoring

The separator is only effective as long as there is an air space inside the chamber. The separator can fail if either the mixed inlet is overwhelmed with supply material, or the liquid drain is unable to handle the volume of liquid being collected. The separator may therefore be combined with some other liquid level sensing mechanism such as a sight glass or float sensor. In this manner, both the supply and drain flow can be regulated to prevent the separator from becoming overloaded.

Where vapor–liquid separators are used

Vapor–liquid separators are very widely used in a great many industries and applications, such as:

Preventing pump damage

In refrigeration systems, it is common for the system to contain a mixture of liquid and gas, but for the mechanical gas compressor to be intolerant of liquid.

Some compressor types such as the scroll compressor use a continuously shrinking compression volume. Once liquid completely fills this volume the pump may either stall and overload, or the the pump chamber may be warped or otherwise damaged by the fluid that can not fit into a smaller space.

See also

References

  1. ^ William D. Baasel (1990). Preliminary Chemical engineering Plant Design (2nd ed.). Van Nostrand Reinhold. ISBN 0-442-23440-6. OCLC 18907139. 
  2. ^ David H.F. Liu (1997). Environmental Engineers' Handbook (2nd ed.). CRC Press. ISBN 0-8493-9971-8. OCLC 35886123. 
  3. ^ Stanley S. Grossel (June 2004). "Design and sizing of knock-out drums/catchtanks for emergency relief systems". Plant/Operations Progress (AIChE) 5 (3): 129–135. doi:10.1002/prsb.720050304. ISSN 0278-4513. 
  4. ^ Stanley M. Walas (1988). Chemical Process Equipment:Selection and Design. Butterworth- Heinemann. ISBN 0-409-90131-8. OCLC 16714037. 

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Vapor-liquid separator — A vapor liquid separator is a vertical vessel used in several industrial applications to separate a vapor liquid mixture. Gravity causes the liquid to settle to the bottom of the vessel, where it is withdrawn. [cite book|author=William D.… …   Wikipedia

  • Vapor-compression refrigeration — [ [http://web.me.unr.edu/me372/Spring2001/Vapor%20Compression%20Refrigeration%20Cycles.pdf The Ideal Vapor Compression Cycle] ] [ [http://iehmtu.edata center.com/toc/chapt r/ch18s82.html Scroll down to The Basic Vapor Compression Cycle and… …   Wikipedia

  • Separator — can refer to: * Cream separator * A component of a lithium polymer cell * Community separator, a term of urban planning * Separator, used to separate the integer part from the fractional part of a number. For example, the decimal separator and… …   Wikipedia

  • Separator (oil production) — A separator for petroleum production is a large drum designed to separate production fluids into their constituent components of oil, gas and water. It works on the principle that the three components have different densities, which allows them… …   Wikipedia

  • Demister (vapor) — A typical, large scale, vapor liquid separator as used in oil refineries, petrochemical and chemical plants A demister, is a device often fitted to vapor liquid separator vessels to enhance the removal of liquid droplets entrained in a vapor… …   Wikipedia

  • Demister (Vapor) — A demister, is a device often fitted to vapor liquid separator vessels to enhance the removal of liquid droplets entrained in a vapor stream. Demisters may be a mesh type coalescer, vane pack or other structure intended to aggregate the mist into …   Wikipedia

  • Souders-Brown equation — The Souders Brown equation [cite journal|author=M. Souders and G. G. Brown|year=1934|month=|title=Design of Fractionating Columns, Entrainment and Capacity |journal= Industrial Engineering Chemistry,|volume=38 |issue=1 |pages=pages 98–103… …   Wikipedia

  • Flash evaporation — Flash (or partial) evaporation is the partial vaporization that occurs when a saturated liquid stream undergoes a reduction in pressure by passing through a throttling valve or other throttling device. This process is one of the simplest unit… …   Wikipedia

  • Pressure vessel — Vertical pressure vessels installed in a structure A pressure vessel is a closed container designed to hold gases or liquids at a pressure substantially different from the ambient pressure. The pressure differential is dangerous and many fatal… …   Wikipedia

  • Knockout (disambiguation) — Knockout may refer to:* Gene knockout, a form of genetically engineered organism * A partially punched opening meant for optional later removal, particularly in electrical enclosures. * Used in warfare to refer to any vehicle that is rendered non …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”