- Control loading system
A Control Loading System (CLS, also known as Electric Control Loading), is used to provide pilots with realistic flight control forces in a flight simulator or training device. These are used in both commercial and military training applications.
The history of control loading systems starts with the history of flight simulation. The first flight simulator was the Link Trainer, also known as the Blue Box. This was developed in the 1920’s and used pumps, valves and bellows to provide the flight control forces. The next development in control loading systems was the use of hydraulic actuators to provide the forces required on the flight controls. These were utilized for around 20 years in the simulator industry until the development of electric actuators.
Control Loading Systems
Design and Technology
The main concept is to provide forces to the pilot using an actuator (hydraulic or electric). The approach used in high fidelity applications is to connect this actuator via a linkage to the pilot controls. The actuator is then controlled with a servo controller to control the torque or current of the motor. An outer-loop control then controls the torque provided to the pilot using a control loop around a force sensor.
The control loading system must take in inputs from the simulator and pilot and provide outputs for the pilot and simulator. Inputs are application of force and aircraft states and outputs are flight control position and forces. An aircraft with reversible controls needs to have all of the complex components modeled within the control loading system. These include cables, rods, aero forces from the control surface, centering springs and trim actuators. As the control system gets more complicated they have to simulate effects such as bob-weights and feel units. Fly-by-wire systems are disconnected from the control surfaces and so do not need the complex features but add other functionality which is simulated. The high fidelity architecture has centralized control, individual analog signals to the control module, a brushless DC motor with low gear ratio and linkages to the pilot controls. The modular designs have localized control and digital reporting over a field bus to the central control module. The control loading systems are designed to allow situating the actuators closer to the pilot. This is necessary for mission training systems that can be easily deployed and moved around the world.
Control Loading Systems are similar in design to active sidesticks. These provide cues to pilots during the flight via actuation systems. Some examples of active sidesticks used in aircraft are for the F-35 Lightning II and the T-50 Golden Eagle jet trainer developed by KAI in partnership with Lockheed Martin Corporation.
Standards and Regulations
The regulations governing control loading systems for civil simulators are the Federal Aviation Administration regulations in North America and EASA (formerly JAA) in Europe. The FAA documents are AC 120-40B for airplane simulator qualification, Advisory circular 120-45A for Airplane Flight Training Device Qualification and AC 120-63 for helicopter Simulator Qualification. The EASA regulations are similar to the FAR’s. Between 2006 and 2008 the International Working Group of the RAeS’s Flight Simulation Group met on several occasions to redefine the standards applicable to flight simulation. This resulted in the release of a draft standards document to ICAO. This will be released by ICAO in 2009 and at this time the FAA and EASA should incorporate this into the regulations. The changes behind the standards will define different levels of simulator training devices which define what training requirements can be trained on with particular levels of simulators.
- ^ "Control Loading System Developments related to Mission Training Systems". http://www.wittenstein-us.com/tech-support/resources/documents/Control_Loading_for_Mission_Training_Devices.pdf. Retrieved 2009-05-04.
- ^ "Royal Aeronautical Society Flight simulation Group Webpage". http://www.raes-fsg.org.uk/. Retrieved 2009-05-04.
Wikimedia Foundation. 2010.
Look at other dictionaries:
System Shock 2 — Developer(s) Irrational Games Looking Glass Studios Publisher(s) Electronic Arts … Wikipedia
Loading gauge — The clearance between train and tunnel is often small. London Underground train at Hendon. A loading gauge defines the maximum height and width for railway vehicles and their loads to ensure safe passage through bridges, tunnels and other… … Wikipedia
Control of the National Grid — The National Grid is the high voltage electric power transmission network in Great Britain, connecting power stations and major substations, and has a synchronized organization such that electricity generated anywhere in Great Britain can be used … Wikipedia
Control of the National Grid (UK) — The National Grid (UK) is the high voltage electric power transmission network in Great Britain, connecting power stations and major substations to ensure that electricity generated anywhere in Great Britain can be used to satisfy demand… … Wikipedia
Loading coil — In electronics, a loading coil or load coil is a coil (inductor) that does not provide coupling to any other circuit, but is inserted in a circuit to increase its inductance. The need was discovered by Oliver Heaviside in studying the… … Wikipedia
Control of chromosome duplication — A key feature of the DNA replication mechanism in eukaryotes is that it is designed to replicate relatively large genomes rapidly and with high fidelity. Replication is initiated at multiple origins of replication on multiple chromosomes… … Wikipedia
System/34 — Techniker Konsole Platinen (SLT Technik) … Deutsch Wikipedia
Nintendo Entertainment System (Model NES-101) — Nintendo Entertainment System NES 101 The NES 101 control deck alongside its similarly redesigned NES 039 game controller. Manufacturer Nintendo Retail availability October 15, 1993 March, 1994 … Wikipedia
IBM System/36 — The IBM System/36 was a minicomputer marketed by IBM from 1983 to 2000. It was a multi user, multi tasking successor to the System/34. Like the System/34 and the older System/32, the System/36 was primarily programmed in the RPG II language. One… … Wikipedia
IBM System/34 — The IBM System/34 was a minicomputer marketed by IBM from 1978 to 1983. It was a multi user, multi tasking successor to the single user System/32. Most notably, it included two very different processors, one based on System/32 and the second… … Wikipedia