Coopers Gap Wind Farm

Coopers Gap Wind Farm

Coopers Gap Wind Farm is a proposed 500 MW wind power station in the Bilboa and Cooranga North region, approximately 50 km south west of Kingaroy and 65 km north of Dalby in Queensland, Australia.

A 60 m wind monitoring mast was installed in March 2006 in order to accurately measure wind speed and direction in the area.[1]

Contents

The site

The location for the wind farm is a hilly area to the west of the Bunya Mountains. The site area lies to the north and south of Niagara Road, starting approximately 3 km from the Bunya Highway, as well as to the west of Jarail Road. The site extends to Crowles Road to the south, Cooranga North-Niagara Road to the west, close to Nords Road and Diamondy Road to the North and close to Bunya Highway to the east.

The area is mostly cleared cattle grazing country and covers approximately 12,000 hectares in total.[2] The project falls within both the South Burnett Regional Council and Dalby Regional Council jurisdictions.[3]

The project

Coopers Gap Wind Farm will have a total generation capacity of up to 500 MW and annually, 1.7 million megawatt hours. The wind farm will consist of up to 252 turbines[3] extending across a series of ridge lines within the proposed site. The wind turbines proposed will be approximately 135 m in height from the tower base to the tip of the blade.[4] The tower will be approximately 80 m high, and the blades approximately 52 metres in length with a rotor diameter of 104 metres. The construction cost of the project were initially to be over $1.2 billion.[3] However the project was revised to include 115 turbines and only cost A$800 million.[5]

The electricity generated from each turbine will be transmitted via underground or above ground cabling to a central cable marshalling point at the on site substation, which will be located next to the 220 kv or 132 kv power lines that run through the site area. The sub station will then connect directly into the grid network on site. It is expected to reduce greenhouse gas emissions by up to 2.2 million tonnes annually.[2]

In April 2011, some local landholders expressed concerns at a community forum related to health effects and the noise of the wind turbines, some of which will be less than a kilometre from homes.[5]

See also

References

External links

26°44′42″S 151°29′06″E / 26.745000°S 151.485000°E / -26.745000; 151.485000Coordinates: 26°44′42″S 151°29′06″E / 26.745000°S 151.485000°E / -26.745000; 151.485000


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Crows Nest Wind Farm — Country Australia Location Toowoomba, Crows Nest, Queensland Status Proposed Owner(s) AGL Energy …   Wikipedia

  • Cloncurry Solar Power Station — A solar thermal power station was to be built in Cloncurry, in north west Queensland. The solar thermal power station was planned have a capacity of 10 megawatt and deliver about 30 million kilowatt hours of electricity a year, enough to power… …   Wikipedia

  • Department of Mines and Energy, Queensland — The Department of Mines and Energy (DOE) is a Queensland Government department dealing with Queensland s energy sector. The head office of the department is at 61 Mary Street in Brisbane. Contents 1 Origin 2 Services to energy sector 3 See also …   Wikipedia

  • Collinsville Power Station — Country Australia Location Townsville, Queensland Coordinates …   Wikipedia

  • Condamine Power Station — Condamine Power Station …   Wikipedia

  • Darling Downs Power Station — Country Australia Location Darling Downs Status Opened Construction began August 2007 Commission date August 2006 …   Wikipedia

  • Mica Creek Power Station — Mica Creek Power Station …   Wikipedia

  • Millmerran Power Station — Millmerran Power Station …   Wikipedia

  • Mount Stuart Power Station — Location Townsville, Australia Status Operational Commission date December 1998 Power station information …   Wikipedia

  • Oakey Power Station — Oakey Power Station …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”