Mohr–Coulomb theory

Mohr–Coulomb theory

Mohr–Coulomb theory is a mathematical model (see yield surface) describing the response of brittle materials such as concrete, or rubble piles, to shear stress as well as normal stress. Most of the classical engineering materials somehow follow this rule in at least a portion of their shear failure envelope. Generally the theory applies to materials for which the compressive strength far exceeds the tensile strength.[1]

In Geotechnical Engineering it is used to define shear strength of soils and rocks at different effective stresses.

In structural engineering it is used to determine failure load as well as the angle of fracture of a displacement fracture in concrete and similar materials. Coulomb's friction hypothesis is used to determine the combination of shear and normal stress that will cause a fracture of the material. Mohr's circle is used to determine which principal stresses that will produce this combination of shear and normal stress, and the angle of the plane in which this will occur. According to the principle of normality the stress introduced at failure will be perpendicular to the line describing the fracture condition.

It can be shown that a material failing according to Coulomb's friction hypothesis will show the displacement introduced at failure forming an angle to the line of fracture equal to the angle of friction. This makes the strength of the material determinable by comparing the external mechanical work introduced by the displacement and the external load with the internal mechanical work introduced by the strain and stress at the line of failure. By conservation of energy the sum of these must be zero and this will make it possible to calculate the failure load of the construction.

A common improvement of this model is to combine Coulomb's friction hypothesis with Rankine's principal stress hypothesis to describe a separation fracture.

Contents

History of the development

The Mohr–Coulomb theory is named in honour of Charles-Augustin de Coulomb and Christian Otto Mohr. Coulomb's contribution was a 1776 essay entitled "Essai sur une application des règles des maximis et minimis à quelques problèmes de statique relatifs à l'architecture" .[2] Mohr developed a generalised form of the theory around the end of the 19th century.[3] As the generalised form affected the interpretation of the criterion, but not the substance of it, some texts continue to refer to the criterion as simply the 'Coulomb criterion'.[4]

Mohr–Coulomb failure criterion

Figure 1: View of Mohr–Coulomb failure surface in 3D space of principal stresses for c=2, \phi=-20^\circ

The Mohr–Coulomb [5] failure criterion represents the linear envelope that is obtained from a plot of the shear strength of a material versus the applied normal stress. This relation is expressed as


  \tau = \sigma~\tan(\phi) + c

where τ is the shear strength, σ is the normal stress, c is the intercept of the failure envelope with the τ axis, and ϕ is the slope of the failure envelope. The quantity c is often called the cohesion and the angle ϕ is called the angle of internal friction . Compression is assumed to be positive in the following discussion. If compression is assumed to be negative then σ should be replaced with − σ.

If ϕ = 0, the Mohr–Coulomb criterion reduces to the Tresca criterion. On the other hand, if \phi = 90^\circ the Mohr–Coulomb model is equivalent to the Rankine model. Higher values of ϕ are not allowed.

From Mohr's circle we have


   \sigma = \sigma_m - \tau_m \sin\phi ~;~~ \tau = \tau_m \cos\phi

where


   \tau_m = \cfrac{\sigma_1-\sigma_3}{2} ~;~~  \sigma_m = \cfrac{\sigma_1+\sigma_3}{2}

and σ1 is the maximum principal stress and σ3 is the minimum principal stress.

Therefore the Mohr–Coulomb criterion may also be expressed as


  \tau_m = \sigma_m \sin\phi + c \cos\phi ~.

This form of the Mohr–Coulomb criterion is applicable to failure on a plane that is parallel to the σ2 direction.

Mohr–Coulomb failure criterion in three dimensions

The Mohr–Coulomb criterion in three dimensions is often expressed as


\left\{\begin{align}
  \pm\cfrac{\sigma_1 - \sigma_2}{2} & = \left[\cfrac{\sigma_1 + \sigma_2}{2}\right]\sin(\phi) + c\cos(\phi) \\
  \pm\cfrac{\sigma_2 - \sigma_3}{2} & = \left[\cfrac{\sigma_2 + \sigma_3}{2}\right]\sin(\phi) + c\cos(\phi)\\
  \pm\cfrac{\sigma_3 - \sigma_1}{2} & = \left[\cfrac{\sigma_3 + \sigma_1}{2}\right]\sin(\phi) + c\cos(\phi)
\end{align}\right.

The Mohr–Coulomb failure surface is a cone with a hexagonal cross section in deviatoric stress space.

The expressions for τ and σ can be generalized to three dimensions by developing expressions for the normal stress and the resolved shear stress on a plane of arbitrary orientation with respect to the coordinate axes (basis vectors). If the unit normal to the plane of interest is


   \mathbf{n} = n_1~\mathbf{e}_1 + n_2~\mathbf{e}_2 + n_3~\mathbf{e}_3

where \mathbf{e}_i,~~ i=1,2,3 are three orthonormal unit basis vectors, and if the principal stresses σ123 are aligned with the basis vectors \mathbf{e}_1, \mathbf{e}_2, \mathbf{e}_3, then the expressions for σ,τ are


   \begin{align}
    \sigma & = n_1^2 \sigma_{1} + n_2^2 \sigma_{2} + n_3^2 \sigma_{3} \\
    \tau & = \sqrt{(n_1\sigma_{1})^2 + (n_2\sigma_{2})^2 + (n_3\sigma_{3})^2 - \sigma^2} \\
         & = \sqrt{n_1^2 n_2^2 (\sigma_1-\sigma_2)^2 + n_2^2 n_3^2 (\sigma_2-\sigma_3)^2 + 
                   n_3^2 n_1^2 (\sigma_3 - \sigma_1)^2} 
   \end{align}

The Mohr–Coulomb failure criterion can then be evaluated using the usual expression


   \tau = \sigma~\tan(\phi) + c

for the six planes of maximum shear stress.

Figure 2: Mohr–Coulomb yield surface in the π-plane for c = 2, \phi = -20^\circ
Figure 3: Trace of the Mohr–Coulomb yield surface in the σ1 − σ2-plane for c = 2, \phi = -20^\circ

Mohr–Coulomb failure surface in Haigh–Westergaard space

The Mohr–Coulomb failure (yield) surface is often expressed in Haigh–Westergaad coordinates. For example, the function


   \cfrac{\sigma_1-\sigma_3}{2} = \cfrac{\sigma_1+\sigma_3}{2}~\sin\phi + c\cos\phi

can be expressed as


   \left[\sqrt{3}~\sin\left(\theta+\cfrac{\pi}{3}\right) - \sin\phi\cos\left(\theta+\cfrac{\pi}{3}\right)\right]\rho - \sqrt{2}\sin(\phi)\xi = \sqrt{6} c \cos\phi

Alternatively, in terms of the invariants p,q,r we can write


  \left[\cfrac{1}{\sqrt{3}~\cos\phi}~\sin\left(\theta+\cfrac{\pi}{3}\right) - \cfrac{1}{3}\tan\phi~\cos\left(\theta+\cfrac{\pi}{3}\right)\right]q - p~\tan\phi = c

where


  \theta = \cfrac{1}{3}\arccos\left[\left(\cfrac{r}{q}\right)^3\right] ~.


Mohr–Coulomb yield and plasticity

The Mohr–Coulomb yield surface is often used to model the plastic flow of geomaterials (and other cohesive-frictional materials). Many such materials show dilatational behavior under triaxial states of stress which the Mohr–Coulomb model does not include. Also, since the yield surface has corners, it may be inconvenient to use the original Mohr–Coulomb model to determine the direction of plastic flow (in the flow theory of plasticity).

A common approach that is used is to use a non-associated plastic flow potential that is smooth. An example of such a potential is the function[citation needed]


   g:= \sqrt{(\alpha c_\mathrm{y} \tan\psi)^2 + G^2(\phi, \theta)~ q^2} - p \tan\phi

where α is a parameter, cy is the value of c when the plastic strain is zero (also called the initial cohesion yield stress), ψ is the angle made by the yield surface in the Rendulic plane at high values of p (this angle is also called the dilation angle), and G(ϕ,θ) is an appropriate function that is also smooth in the deviatoric stress plane.

See also

References

  1. ^ Juvinal, Robert C. & Marshek, Kurt .; Fundamentals of machine component design. – 2nd ed., 1991, pp. 217, ISBN 0-471-62281-8
  2. ^ AMIR R. KHOEI; Computational Plasticity in Powder Forming Processes; Elsevier, Amsterdam; 2005; 449 pp.
  3. ^ MAO-HONG YU; "Advances in strength theories for materials under complex stress state in the 20th Century"; Applied Mechanics Reviews; American Society of Mechanical Engineers, New York, U.S.A.; May 2002; 55 (3): pp. 169–218.
  4. ^ NIELS SAABYE OTTOSEN and MATTI RISTINMAA; The Mechanics of Constitutive Modeling; Elsevier Science, Amsterdam, The Netherlands; 2005; pp. 165ff.
  5. ^ Coulomb, C. A. (1776). Essai sur une application des regles des maximis et minimis a quelquels problemesde statique relatifs, a la architecture. Mem. Acad. Roy. Div. Sav., vol. 7, pp. 343–387.

Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Mohr-Coulomb theory — is a mathematical model (see yield surface) describing the response of a material such as rubble piles or concrete to shear stress as well as normal stress. Most of the classical engineering materials somehow follow this rule in at least a… …   Wikipedia

  • Coulomb (disambiguation) — Coulomb or Coulombs may refer to: Charles Augustin de Coulomb (1736–1806), French physicist, also: Coulomb, a unit of electric charge Coulomb s law, in electrostatics Coulomb blockade, an increased resistance of certain electronic devices Coulomb …   Wikipedia

  • Mohr (surname) — Mohr is a German language surname and may refer to: Alexander Mohr (1892–1974), a German Expressionist artist Bill Mohr (1909–1971), an Australian rules footballer Charles Mohr (1824–1901), a German American pharmacist and botanist Christopher… …   Wikipedia

  • Mohr'scher Spannungskreis — Beispiel für den mohrschen Spannungskreis Spannungszustand im gedrehten Schnitt …   Deutsch Wikipedia

  • Charles-Augustin de Coulomb — Portrait by Hippolyte Lecomte Born 14 June 1736 …   Wikipedia

  • Christian Otto Mohr — (October 8, 1835 – October 2, 1918) was a German civil engineer. Biography He was born on October 8, 1835 to a landowning family in Wesselburen in the Holstein region. At the age of 16 attended the Polytechnic School in Hanover. Starting in 1855 …   Wikipedia

  • Failure theory (material) — v · d · e Materials failure modes Buckling · Corro …   Wikipedia

  • Shear strength (soil) — Shear strength in reference to soil is a term used to describe the maximum strength of soil at which point significant plastic deformation or yielding occurs due to an applied shear stress. There is no definitive shear strength of a soil as it… …   Wikipedia

  • Yield surface — A yield surface is a five dimensional surface in the six dimensional space of stresses. The state of stress of inside the yield surface is elastic. When the stress state lies on the surface the material is said to have reached its yield point and …   Wikipedia

  • Scientific phenomena named after people — This is a list of scientific phenomena and concepts named after people (eponymous phenomena). For other lists of eponyms, see eponym. NOTOC A* Abderhalden ninhydrin reaction Emil Abderhalden * Abney effect, Abney s law of additivity William de… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”