Curtiss-Wright AT-9

Curtiss-Wright AT-9
AT-9 Jeep
AT-9A
Role Advanced twin-engined trainer
Manufacturer Curtiss-Wright Corporation
First flight 1941
Primary users United States Army Air Forces
United States Air Force
Produced 1941–1943
Number built 792 (including prototype and AT-9A variant)

The Curtiss-Wright AT-9 Jeep was a twin-engined advanced trainer aircraft used by the United States during World War II to bridge the gap between single-engine trainers and twin-engine combat aircraft. The AT-9 was of a low-wing cantilever monoplane configuration, had retractable landing gear and was powered by two Lycoming R-680-9 radial engines.

Contents

Development

Curtiss-Wright anticipated the requirement for this type of "high-performance" aircraft and designed the Curtiss-Wright CW-25, a twin-engine trainer, which possessed the takeoff and landing characteristics of a light bomber aircraft. Using the same basic design as the larger Cessna AT-17, the new CW-25 was designed to be simulate the demands of multi-engine operations. The design featured a small layout, grouping two Lycoming R-680-9 radial engines forward and using a retractable tail-wheel landing gear to achieve the performance necessary to meet the requirements of an advanced trainer. The single CW-25 prototype acquired for evaluation had a welded steel-tube fuselage structure with the wings, fuselage and tail unit fabric-covered.[1]

Operational history

The first prototype Model 25 flew in 1941 and the production version entered service as the AT-9 in 1942. Named the "Fledgling" by Curtiss-Wright, it commonly became known as the "Jeep" in the United States Army Air Forces (USAAF).[2] The prototype CW-25 had a fabric-covered steel tube fuselage and fabric-covered wings and tail units, but production AT-9s were of stressed metal skin construction. [1]

The AT-9 was purposely designed to be less stable and proved be difficult to fly or land, which made it particularly suitable for teaching new pilots to cope with the demanding flight characteristics of a new generation of high-performance, multi-engine aircraft such as the B-26 Marauder and P-38 Lightning. [1] However, many pilots[who?] who have flown both the AT-9 and the P-38 have said that the Lightning should have been used instead to train pilots to fly the Jeep.[citation needed]

A total of 491 AT-9s were built before production ended and a new production run of 300 of the generally similar AT-9A commenced. [1]

Because of its difficult flying characteristics the AT-9 was not offered for sale to civilians after the war, although many non-flying examples were given to ground schools for training purposes.

Variants

CW-25
Prototype with fabric covered fuselage and tail surfaces
AT-9
Production aircraft with stressed-skin covering and two Lycoming R-680-9 radial engines, 491 built.
AT-9A
AT-9 with Lycoming R-680-11 radial engines and revised hydraulic system, 300 built before production ended in February 1943.

Operators

 United States

Survivors

Curtiss AT-9 at the National Museum of the United States Air Force

Two AT-9s survive today with one AT-9A on permanent display at the National Museum of the United States Air Force in Dayton, Ohio. This aircraft required extensive restoration, and was the product of the museum staff incorporating two incomplete airframes together, along with parts fabricated on site. While the wreckage of an AT-9A recovered from a crash site in 2003 was turned over to the Pima Air & Space Museum for restoration, the aircraft is incomplete and will require a long and extensive restoration for display.

Specifications (AT-9)

Data from Curtiss Aircraft 1907–1947[3]

General characteristics

  • Crew: two - student and instructor
  • Length: 31 ft 8 in (9.65 m)
  • Wingspan: 40 ft 4 in (12.29 m)
  • Height: 9 ft 10 in (2.99 m)
  • Wing area: 233 ft² (21.7 m²)
  • Empty weight: 4,494 lb (2,011 kg)
  • Loaded weight: 6,060 lb (2,749 kg)
  • Powerplant: 2 × Lycoming R-680-9 nine-cylinder air-cooled radial engine, 295 hp (220 kW) each

Performance

Related content

Related development:

Comparable aircraft: Beech C-45 Expeditor

References

Notes

  1. ^ a b c d Mondey 2006, p.70.
  2. ^ Shanaberger, Kenneth W. "Curtiss-Wright AT-9 Fledgling/Jeep." KensAviation.com, 2008.
  3. ^ Bowers 1979, p.471.

Bibliography

  • Bowers, Peter M. Curtiss Aircraft, 1907-1947. London: Putnam & Company Ltd., 1979. ISBN 0-370-10029-8.
  • Mondey, David. American Aircraft of World War II (Hamlyn Concise Guide). London: Bounty Books, 2006. ISBN 978-0-7537-1461-4.

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Curtiss-Wright — Corporation Type Public (NYSE: CW) Industry Aerospace Defense …   Wikipedia

  • Curtiss-Wright — Corporation Rechtsform Corporation Gründung 5. Juli 1929 Sitz …   Deutsch Wikipedia

  • Curtiss-Wright C-46 — Curtiss C 46 Commando …   Deutsch Wikipedia

  • Curtiss-Wright X-19 — Le X 19 en vol stationnaire. Rôle ADAC/ADAV expérimental Constructeur …   Wikipédia en Français

  • Curtiss-Wright X-19 — Curtiss Wright X 19  исследовательский самолёт. Самолёт Curtiss Wright X 19 с вертикальным взлётом  посадкой и для взлёта посадки с укороч …   Википедия

  • Curtiss-Wright X-19 — Curtiss Wright X 19 …   Deutsch Wikipedia

  • Curtiss-Wright VZ-7 — Экспериментальный летательный аппарат вертикального взлета фирмы Curtiss Wright Тип Аппарат вертикального взлета Производи …   Википедия

  • Curtiss-Wright XP-55 — Curtiss XP 55 Ascender …   Deutsch Wikipedia

  • Curtiss-Wright — Corporation Pour les articles homonymes, voir Curtis et Wright. Curtiss Wright Corporation est un constructeur aéronautique américain. Histoire Les avions produits par Curtiss Wright Corporation (liste alphabétique) C 46 Commando F6C F7C Seahawk… …   Wikipédia en Français

  • Curtiss-Wright CW-21 — CW 21 CW 21 B Demon, Netherlands East Indies Army Air Corps Role Fighter …   Wikipedia

  • Curtiss-Wright CW-22 — CW 22/SNC A U.S. Navy SNC 1 in September 1943 Role Fighter and advanced trainer …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”