Aperture grille

An aperture grille (tension mask) is one of two major technologies used to manufacture color cathode ray tube (CRT) televisions and computer displays; the other is shadow mask.

Fine vertical wires behind the front glass of the display screen separate the different colors of phosphors into strips. These wires are positioned such that an electron beam from one of three guns at the rear of the tube is only able to strike phosphors of the appropriate color. That is, the blue electron gun will strike blue phosphors, but will find a wire blocks the path to red and green phosphors.

The fine wires allow for a finer dot pitch as they can be spaced much closer together than the perforations of a shadow mask, and there need be no gap between adjacent horizontal pixels.

During the display of bright images, a shadow mask will heat up, and expand outward in all directions (sometimes called blooming). Aperture Grilles do not exhibit this behavior - when the wires heat up, they expand vertically. Because there are no defined holes, this expansion does not affect the image, and the wires do not move horizontally.

The vertical wires of the aperture grille have a resonant frequency and will vibrate in sympathetic resonance with loud sounds near the display, resulting in fluttering and shimmering of colors on the display. To reduce these resonant effects, one or two horizontal stabilizing wires are welded across the grille wires, and may be visible as fine dark lines across the face of the screen. These stabilizing wires provide the easiest way to distinguish aperture grille and shadow mask displays at a glance. The stabilized grille can still vibrate but the sounds need to be loud and in close proximity to the display.

Additionally, aperture grille displays tend to be vertically flat and are often horizontally flat as well, while shadow mask displays usually have a spherical curvature.

The first patented aperture grille televisions were manufactured by Sony in the late 1960s under the Trinitron brand name, which the company carried over to its line of CRT computer monitors. Subsequent designs, either licensed from Sony or manufactured after the patent's expiration, tend to use the -tron suffix, such as Mitsubishi's DiamondTron and ViewSonic's SonicTron.

While many considered aperture grille technology to produce superior images, advances in shadow mask and hybrid technologies since the 1990s have made people's preferences more a matter of personal choice or specific application. The arrival of inexpensive liquid crystal display (LCD) monitors and other flat-screen designs now challenges both aperture grille and shadow mask CRTs' long reign as the dominant technology behind display screens.

One drawback to the use of aperture grille monitors is the faint lines that appear at one third and two thirds of the screens' height (often at just one location—usually 2/3rds from top—on smaller displays like the Sony FD Trinitron WEGA KV-21FS140, of 21 inches). These lines are caused by two thin wires that run perpendicular to the grille which are used to maintain equal spacing between the vertical wires of the grille. Additionally, the tension required to keep the wires taut requires a heavy frame, making aperture-grille based CRTs noticeably heavier than their shadow-mask based analogue.

External links

* [http://www.monitorworld.com/faq_pages/q28_page.html Aperture grille details]