Divided drive (locomotive)

Divided drive (locomotive)

A divided drive locomotive is a steam locomotive that divides the driving force on its wheels by using different cylinders to power different pairs of driving wheels in order to give better weight distribution and reduce "hammer blow" which can be damaging to the track, or else to enable the wider spacing of the driving wheels to accommodate a larger firebox.

Origins

The system of dividing drive was originally developed by Anatole Mallet in the 1870s on a number of rigid-wheelbase compound locomotives, and then during the 1880s, on Mallet articulated locomotives. Mallet's ideas inspired Francis Webb in Britain who introduced 2-(2-2)-0, 2-(2-2)-2, 2-2-2-2T, 2-2-(4-0)T divided drive locomotives between 1882 and 1903. Similarly, Alfred de Glehn introduced a successful divided drive 2-(2-2)-0 compound based on Webb's ideas,[1] and, less successfully, by Dugald Drummond of the London and South Western Railway with his simple expansion T7 and E10 Classes of 4-2-2-0. In the latter two instances the divided drive was adopted to allow the driving wheels to be spaced more widely than normal without the need for long coupling rods. This enabled an extra-long firebox.[2]

Divided drive could also be used on simple expansion locomotives with coupled driving wheels. The NER Class X (LNER Class T1) 4-8-0T shunting engines designed by Wilson Worsdell for the North Eastern Railway had three cylinders with divided drive.[3]. Similarly Richard Maunsell of the Southern Railway (Great Britain) designed the SR Lord Nelson class with divided drive between the front coupled axle for the inside cylinders and the middle coupled axle for the outside cylinders 'to give better weight distribution and reduced hammer blow'.[4]

Sir Nigel Gresley of the London and North Eastern Railway (LNER) used divided drive on his B17 class 4-6-0 for hauling passenger services on the severely weight restricted Great Eastern Main Line.[5] Gresley's successors Edward Thompson and Arthur Peppercorn both adopted divided drive on their larger designs as a consequence of their wish to overcome the maintenance problems associated with the Gresley conjugated valve gear.[6]

The concept was further developed in the early 1930s in the United States by the Baldwin Locomotive Works, with their duplex locomotives which divided the drive between two sets of outside cylinders.

References

Sources

  • Ahrons, E. L. (1927). The British Steam Railway Locomotive 1825-1925. Amen Corner, London: Locomotive Publishing Co.. 
  • Bradley, D.L. (1975). Locomotives of the Southern Railway. Part 1. London: Railway Correspondence and Travel Society. 
  • Casserley, H.C. (1971). London and South Western locomotives. London: Ian Allan. 
  • Marshall, John (1978). A biographical dictionary of railway engineers. Newton Abbot: David and Charles. 

Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • locomotive — locomotively, adv. locomotiveness, locomotivity, n. /loh keuh moh tiv/, n. 1. a self propelled, vehicular engine, powered by steam, a diesel, or electricity, for pulling or, sometimes, pushing a train or individual railroad cars. 2. an organized… …   Universalium

  • Compound locomotive — For the principles and other applications of the compound steam engine, see compound engine. De Glehn redirects here. For people and places named Glehn, de Glehn or von Glehn, see Glehn. A compound locomotive is a steam locomotive or engine unit… …   Wikipedia

  • New South Wales D58 class locomotive — New South Wales D58 class 5808 with a westbound goods train passing below the Lithgow Zig Zag Power type Steam Builder NSWGR Eveleigh Workshops (11) NSWGR Cardiff Workshops (2) Total produced …   Wikipedia

  • DRG locomotive classification — The DRG locomotive classification system was developed by the German Imperial Railway Company or Deutsche Reichsbahn Gesellschaft (DRG), which was formed in 1924 following the merger of the German state railways (Länderbahnen) in 1920[1]. A… …   Wikipedia

  • Steam locomotive — A steam locomotive is a locomotive powered by steam. The term usually refers to its use on railways, but can also refer to a road locomotive such as a traction engine or steamroller.Steam locomotives dominated rail traction from the mid 19th… …   Wikipedia

  • LNER Gresley Classes A1 and A3 — Disambiguation: LNER Class A1, LNER Thompson Class A1/1, LNER Peppercorn Class A1 LNER Gresley Classes A1 and A3[ …   Wikipedia

  • Whyte notation — A selection of early 20th century locomotive types according to their Whyte notation and their comparative size …   Wikipedia

  • Vincent Raven — Sir Vincent Litchfield Raven KBE (3 December 1858 14 February 1934) was chief mechanical engineer of the North Eastern Railway from 1910 to 1922. Biography Vincent Raven was born the son of a clergyman at Great Fransham, Norfolk and educated at… …   Wikipedia

  • 2-6-6-4 — Norfolk Western Class A #1206 displayed at the New York World s Fair in 1939. In the Whyte notation for the classification of steam locomotive wheel arrangement, a 2 6 6 4 is a locomotive with a two wheel leading truck, two sets of six driving… …   Wikipedia

  • 4-4-6-4 — A 4 4 6 4, in the Whyte notation for the classification of steam locomotives by wheel arrangement, is one that has four leading wheels followed by four coupled driving wheels, a second set of six coupled driving wheels and four trailing… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”