Central vacuum cleaner

Central vacuum cleaner
The power unit of a typical central vacuum cleaner for residential use

A central vacuum cleaner (also known as built-in or ducted) is a type of vacuum cleaner appliance, installed into a building as a semi-permanent fixture. Central vacuum systems are designed to remove dirt and debris from homes and buildings, sending dirt particles through tubing installed inside the walls to a collection container in a remote utility space. The power unit is permanent and is typically installed in a basement, garage or storage room, along with the collection container. Inlets are installed in walls throughout the building that attach to power hoses and other central vacuum accessories to remove dust and particles from a room. Most power hoses typically have a power switch located on the handle.

Contents

History

19th century

The first introduction of a system similar to a central vacuum cleaner was in the late 19th century. A ducted machine that featured copper tubes connected from a bellows chamber, typically located in the basement, and extended to several locations throughout a building, was used in a select few homes at this time. Because of the machine’s cost and weak dust-removal capabilities, only a few of these units were ever sold in the United States.

In 1869 Ives McGaffey patented the first portable vacuum cleaner, or “sweeping machine”. The portable vacuum cleaner is the parent product to the modern central vacuum system.

20th century

In the 1930s, the development of small, powerful electric motors increased the popularity and availability of the portable vacuum cleaner, and further diverted consumers from purchasing central cleaners.

By the early 1960s, the invention of polyvinyl chloride (PVC) thinwall vacuum tubing made the central vacuum system more affordable in the United States. Previously, more-expensive metal tubing was used exclusively.

In the 1990s, central vacuum systems gained popularity among real estate agents and home remodelers for the value they added to homes at resale. Allergists also played an important role in the growing popularity of central vacuum systems in the 1990s. Because many systems exhaust completely out of the home, no dust or allergens can be re-circulated through the interior air, as is the case with traditional vacuums.

Dirt separation

Cyclonic and filtered central vacuum systems which are the two main types of central vacuums, differentiated by the method used to separate dirt and dust from the incoming airstream.

True cyclonic cleaners do not use filtration bags, instead separating the dirt and dust into a detachable cylindrical collection vessel or bin. Air and dust are sucked at high speed into the collection vessel at a direction tangential to the vessel wall, creating a fast-spinning vortex. Roughly speaking, the dust particles and other debris spiral outward to the wall of the vessel by centrifugal force, where they fall due to gravity into the bottom of the collection bin. For a more complete technical description of this process, see the article on "Cyclonic separation".

In fixed-installation central vacuum cleaners, the cleaned air may be exhausted directly outside without need for further filtration. A well-designed cyclonic filtration system does not lose suction power due to airflow restriction, until the collection vessel is almost full. This is in marked contrast to filter bag systems, which gradually lose suction as pores in the filter become clogged by collected dirt and dust.

Filtered systems use a wide variety of different bags or filters that must be cleaned (permanent cloth bags) or replaced (disposable paper bags) on a regular basis. Filters can be made from screening, foam, paper, or cloth, and are usually proprietary designs that may not be widely available. Over time, repeated purchase of filters and bags can become significant ongoing expenses.

Bag breakage is a little-known issue that arises with filtered central vacuums. In a portable vacuum, if the filter bag fails, this condition becomes immediately obvious as a cloud of dust and dirt blows into the room. Although it creates a mess, at least the problem can be immediately brought under control by shutting off the appliance. By contrast, if the filter bag in a central unit should fail, little change may be noticed by the remote operator. Ironically, the only perceivable change may be an increase in suction power as a clogged but broken bag is completely bypassed. If the filtered air is also used to cool the motor (a very typical design), the first clue that something is amiss may be when the motor completely seizes up due to dirt accumulating in the motor brushes, windings, or bearings. Such a failure can require complete replacement of the expensive central unit.

Of course, filterless central vacuums are completely immune to such failures. In addition, the best designs in either system incorporate so-called "bypass cooling", using a completely separate source of ambient air to cool the motor, rather than the design expedient of using just-filtered dirty airflow for this vital function.

Hybrid cyclonic filtered systems have been made, which use a rudimentary cyclonic motion to separate out larger dirt particles, but rely on conventional filter bags to trap remaining finer particles. True cyclonic systems are very effective in removing all but the finest particles, which are then exhausted directly outside, completely eliminating the need for replaceable filters and their consequent airflow restrictions. The exhaust from a good quality true cyclonic system contains far less debris than a typical clothes dryer exhaust.

Tools and accessories

Central vacuums can be equipped with either an electrical power brush or an air-driven power brush. The air-driven (or turbine) systems frequently are less expensive because they don’t require electrical wires for power to be run to each wall inlet. Turbine-driven brushes tend to be noisier than electric brushes; the noise from either is more noticeable in the absence of the "vacuum whine" produced by portable vacuums. Many users find that the high suction of central vacuums is more than sufficient for most casual cleaning jobs, but reserve a powered brush tool for more difficult tasks.

A typical standard central vacuum system is equipped with a 30 foot (9 m) hose, plus standard cleaning tools similar to those used with portable vacuum cleaners. For further convenience, some owners will keep a hose and set of tools on each floor of a multi-story building, but this is completely optional. When not in use, the hose is loosely coiled around a wire rack mounted on a closet wall, or on the back of a door.

A relatively new alternative for storing vacuum hose is the "Hide-A-Hose" system, which uses suction to draw the hose into the vacuum tubing in the wall for storage. Hose lengths used are typically are 30/40/50 ft (9/12/15 m). Successful installation of such systems requires special fittings, plus careful design and workmanship, to insure smooth hose retraction into the tubing for storage.[1] A scaled-down 10-foot (3 m) version (e.g. "Spot by Vroom") is available for quick cleaning in locations such as mud rooms and laundry rooms. The original "Vroom" system, which is still available, uses suction to operate a cabinet-mounted hose reel with a 24 ft (7.3 m) hose, rather than storing the hose within the wall tubing.

A modular vacuum hose called "QuickClick" is available in 10/15/20 foot (3/4.5/6 m) lengths, allowing a custom-length hose to be quickly set up or taken apart by an end user.[2] In addition, a promotional article in a trade magazine claims that arthritic testers were able to connect and disconnect the hose in spite of their disability.[3]

Automatic dustpans (e.g. "Vacpan" or ""KickSweep") can be installed in the kickspace under a kitchen, bathroom, or workroom counter, enabling a person to use a standard broom to sweep debris directly into a vacuum inlet located there.[4]

The "VacnSeal" is an accessory intended to be installed on the underside of a kitchen cabinet, over a counter used for food preparation. The nozzle of the device is used to evacuate excess air from a zipper lock plastic food storage bag (e.g. Ziplok), which is claimed to preserve food freshness for a longer period of time.[5]

Advantages

  • Increased suction power — Because the vacuum cleaner motor and dirt collection system need not be portable, the weight and size of the unit are not as severely constrained as in a portable system. In addition, bagless filterless systems avoid the inevitable loss of suction in filtered systems caused by collected dust clogging the filters.
  • Ability to handle "difficult" debris — Central vacuums, especially filterless models, can efficiently remove difficult dry substances, such as plaster dust, spilled flour, laser printer toner, metal knockout slugs and wire clippings from electrical work, or even small pieces and slivers of broken glass. This ability may depend on the ability of the filter bag to resist clogging or breakage; filterless models are capable of removing the widest range of materials. "Wet vacuum" accessories are available for some systems; these operate by separating liquids from the dirty airstream prior to passage into the in-wall tubing or central unit. These "wet vac" units are subject to the same limitations as "wet-or-dry shop vacuums", and must be washed out and dried after use to prevent unpleasant odors and mold growth. However, toxic materials, such as asbestos should never be cleaned up with anything but specialized equipment made expressly for the purpose.
  • Complete removal of allergens and noxious odors — Central vacuums generally do not recirculate exhaust air back into the space being cleaned. This contrasts with the well-known acrid "vacuum smell" of fine dust and hot air exhausted from a portable vacuum. Instead, central vacuums exhaust spent air into a utility space, or directly outdoors. An external exhaust outlet can be easily concealed under a porch or behind shrubbery, but in any case is less obtrusive than a standard clothes dryer appliance vent.
  • Low acoustic noise — Well-designed central vacuums are very quiet at the point of use, since the powerful motor is located remotely in a utility space. This is a benefit to the person vacuuming, as well as anybody else occupying the space being cleaned, who otherwise might be woken up or driven out by the loud whine of portable machines.
  • Convenient cleaning — Setup, use, and stowage of a vacuum hose and cleaning tool can be quick and efficient. Cleaning stairways is much easier without having to balance a heavy, hot appliance on each step, and coping with both an electrical cord and a vacuum hose.
  • Infrequent emptying — Central vacuums typically can accumulate up to 10 pounds (22 kg) or more of dirt and dust before requiring disposal. This is an unavoidable messy task that must be performed for any vacuum cleaner, but can be done much less frequently, perhaps once or twice per year. Filterless systems are usually the easiest to empty, since careful refitting of a replacement bag is never needed.
  • Low consumables cost — For filterless systems, there are no ongoing costs, other than occasionally replacing a worn-out brush or vacuum hose.
  • Compatible with standard tools and accessories — Most central vacuum hoses are compatible with a wide range of industry standard brushes and tools used with ordinary portable vacuum cleaners. In the US, the de facto standard size is 1-1/4 inch (3.175 cm) inside diameter for tools. For some accessories, it may actually be necessary to "bleed off" excessive suction, usually by partially opening a small bleed port on the side of the vacuum hose handle, provided for that purpose.
  • Reduced damage and wear to furniture and walls — There is no heavy or awkward canister or other motorized unit to carry from room to room when vacuuming. Only a lightweight vacuum hose and the cleaning tool being used need to be carried. To further reduce wear to furniture feet and projecting baseboard corners, a soft woven "hose sock" can be installed over the corrugated vacuum hose.
  • Durable equipment — Good quality central vacuum systems can last indefinitely, perhaps requiring replacement of the motor brushes once per decade of use. Besides using heavy-duty components, central vacuums avoid the damage caused by accidental dropping or collisions of portable equipment with fixed objects. Many manufacturers give a "Lifetime Limited Warranty" on all permanently-installed components of a central vacuum system.

Disadvantages

The chief perceived disadvantage of central vacuums is higher cost. In the US, a typical central vacuum system may have an installed cost around $1000. This initial cost must be balanced against the benefits over time of a central vacuum, including the typical longer service life of the equipment, and negligible consumables cost if a filterless system is chosen.

A central vacuum system is typically considered a fixture, i.e. a permanent part of the building where it is installed, similar to plumbing or electrical fixtures. A short-term renter would likely lose any investment made in improving the property, unless a prior agreement were made with the property owner. Installation of a quality central vacuum is generally considered to increase the property value of a residence or commercial property.

At least one manufacturer produces a scaled-down central vacuum unit intended for installation in smaller individual apartments, condominiums, or even mobile homes. Unlike the larger cyclonic models produced by the same company, this compact unit uses conventional filter bags, but retains most of the other advantages of a central vacuum system. A different system, called "OnBoard", is designed for recreational vehicles (motor homes), and pleasure boats, and has an optional wet vacuuming capability.

Maintenance

Central vacuum systems require periodic emptying of the dirt canister or replacing the filter bag, typically 2–4 times per year. In some models, is also important that the filters be changed frequently, especially for designs where the just-filtered air passes through the motor for cooling. For filtered systems, the bag may need to be replaced long before it is filled to its nominal capacity, because of reduced suction due to clogging with dirt or fine dust.

Filterless cyclonic separation systems only require emptying the dirt collection container before the suction drops off as an almost-full condition is reached. Many cyclonic vacuum systems now feature translucent dirt collection canisters, allowing quick inspection without removing the canister.

Regardless of which dirt separation system is used, the electric motor may require lubrication of its bearings, or replacement of carbon brushes on an infrequent basis, usually measured in years.

Installation

A principal concern when designing a central vacuum system is avoiding situations likely to cause clogging of the tubing with debris such as toothpicks, hairpins, needles, or similar-shaped objects, The most important safeguard is at the vacuum inlets, which are intentionally designed with a tighter radius of curvature than any other bends in the system. This is done to insure that if any vacuumed debris becomes stuck, it will jam right at the inlet, where it is easiest to discover and to remove. Well-designed central vacuum tubing rarely or never clogs unless severely abused (e.g. vacuuming wet plaster, wet flour, or other sticky substances).

The wall inlets are connected to the power unit by tubes that can be run inside walls, or through vertical pipe chases, closets, the attic, basement, or the cold air return ducts (if permitted by building code). In new construction, the vacuum tubing is usually installed during a "rough-in" phase once the building interior framing is complete, after other in-wall utilities (e.g. plumbing, HVAC, electrical, etc.), and just before drywall, paneling, or other surface finishes are installed. Strictly speaking, vacuum tubing should probably be installed before cabling (for electric power, telephone, LAN, etc.), since routing of wiring is usually less constrained than tubing. In a similar manner to plumbing and electrical fixtures, the vacuum inlet fittings and final connections are installed in a finish phase, after the wall finishing is complete.

Vacuum tubing systems may be installed by electricians, plumbers, specialized contractors, or even do-it-yourself homeowners.[6]

Retrofitting of vacuum tubing in existing structures can be surprisingly straight forward or more difficult, depending on the anatomy of the building. A home remodeling project can generate large amounts of irritating plaster dust and other demolition and construction dirt. Installing a central vacuum early in the project makes ongoing cleanup much easier, especially if it is a filterless true cyclonic unit, which can inhale even abrasive or sharp construction debris without concerns about bag clogging or breakage.

A typical house requires 2–4 inlets per floor, although many users find the central vacuum so convenient that they install additional inlets in the basement, attic, and even on the back porch (for vacuuming car interiors, storage sheds, etc.). A rough rule of thumb is one inlet per 600 sq ft (55 sq m) of floor area. Inlets should be placed in convenient locations unlikely to be blocked by open doors or furniture, such as in central hallways. A non-stretchable cord of appropriate length (or a string on an architectural scale drawing) can be used to check for adequate reach of a vacuum hose.

Routing and design of vacuum tubing layout is very similar to drain-waste-vent (DWV) plumbing, with the exception that pipe pitch or gradient for drainage is not required. Vacuum system designs share with DWV designs a concern about eliminating internal ridges, burrs, sharp turns, pockets, or other obstructions to smooth flow that might cause build-up of material into pipe blockages. Tubing for central vacuums has a few peculiar constraints of its own, and a few unusual capabilities, such as the ability to run a pipe straight upwards after a sufficiently long horizontal "running start". These and other installation details are described in installation manuals available from manufacturers.[7]

Two different diameters of thinwall plastic tubing have been used in the US. For years, HP Vacuflo advocated the slightly-smaller 1-13/16 inch (4.6 cm) tubing size (outside diameter), claiming that their studies showed that it was less likely to clog. However, in recent years, that manufacturer has switched to the de facto industry standard size of 2 inch (5.08 cm) outside diameter tubing and corresponding fittings. In most cases, the end user need not be aware of the tubing size in a central vacuum system, but the tubing size must be considered when extending, modifying, or repairing a system. Size adapters have been made to allow interconnection of the two sizes when necessary.

Occasionally, the owner of a new house under construction may choose to pre-install vacuum tubing and control wiring in the walls, but to defer purchase of the central unit, hose, and tools to reduce cash flow. Installing tubing and wiring for a central vacuum in new construction is definitely much easier if done before the drywall and other wall finishes. The short-term cost savings of deferring full system completion should be weighed against the great convenience of having a functional vacuum system, especially during the commissioning and move-in period, which generate more than the usual amount of debris to be cleaned up.

References

  1. ^ "Hide-A-Hose System". Vacuflo.com. H-P Products, Inc.. http://www.vacuflo.com/hide-a-hose-central-vacuum-hose. Retrieved 2011-07-28. 
  2. ^ "Quick Click Modular Hose". builtinvacuum.com [website]. M. D. Manufacturing, Inc.. http://builtinvacuum.com/quick-click/. Retrieved 2011-05-16. 
  3. ^ "QuickClick: M.D.'s Modular Hose Builds Profit". Central Vac Professional. Des Moines, Iowa: VDTA. August 2007. pp. 4–6. http://builtinvacuum.com/images/site_miscaesthetics/products/quickclick/VDTA%20Quick%20Click.pdf. Retrieved 2011-05-16. 
  4. ^ "VacPan, VacPan II, and VacuSweep". builtinvacuum.com [website]. M.D. Manufacturing, Inc.. http://builtinvacuum.com/vacpan.html. Retrieved 2011-05-16. 
  5. ^ "[Homepage"]. VacnSeal Convenient Food Preserver. M.D. Manufacturing, Inc.. http://vacnseal.com/index.php. Retrieved 2011-05-16. 
  6. ^ Guertin, Mike (November 2011). "You Can Install a Central Vac". Fine Homebuilding (Newtown, CT: Taunton Press) (222): 64–67. ISSN 1096-360X. 
  7. ^ "Do-It-Yourself Installation Manual". Beam Central Vacuum Systems. Electrolux Home Care Products. http://www.beamvac.com/usa/installation/install_manual.aspx. Retrieved 2011-07-28. 

Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Vacuum cleaner — Cylinder vacuum cleaner for home use. French train vacuum cleaner …   Wikipedia

  • central vacuum — noun a vacuum cleaner built into the fabric of a building, with a central motor and dirt bag and distributed points where a hose and appliances may be plugged in …   Wiktionary

  • Villa Haux — is an Art nouveau villa built in 1908 by archtects Richard Böklen and Carl Feil in the southern German town of Ebingen.It was built for Kommerzienrat Friedrich Haux (1860 1929), entrepreneur in the local textile industry, between his factory and… …   Wikipedia

  • James Dyson — Infobox Person name = Sir James Dyson image size = caption = English inventor and entrepreneur birth date = Birth date and age|df=yes|1947|5|2 birth place = Norfolk, England residence = Gloucestershire, France, London nationality = British known… …   Wikipedia

  • Electrolux — Infobox Company company name = AB Electrolux company company type = Public (OMX|SSE81|ELUX B) foundation = 1910 key people = Marcus Wallenberg (Chairman of the board), Hans Stråberg (President and CEO) location city = Stockholm location country …   Wikipedia

  • List of British words not widely used in the United States — Differences between American and British English American English …   Wikipedia

  • David Oreck — Born September 17, 1923 (1923 09 17) (age 88) Duluth, Minnesota, U.S. Occupation Spokesman Spouse Jan Children …   Wikipedia

  • Hubert Cecil Booth — (4 July 1871 ndash; 18 January 1955) was a British engineer who invented the first powered vacuum cleaner, [cite news|url=http://news.bbc.co.uk/1/hi/uk/1515776.stm|title=Sucking up to the vacuum cleaner|date=2001 08… …   Wikipedia

  • Vorwerk (company) — Infobox Company company name = Vorwerk Co. KG company company type = limited partnership company slogan = Our best for your family foundation = Wuppertal, Germany (1883) location = Wuppertal, Germany key people = Achim Schwanitz (Managing… …   Wikipedia

  • Auditory masking — occurs when the perception of one sound is affected by the presence of another sound (Gelfand 2004). The term masking is not confined to auditory perception as it can also be used in visual perception tasks.Masking can be simultaneous or non… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”