Mass concentration (chemistry)

Mass concentration (chemistry)

In chemistry, the mass concentration ρi (or γi) is defined as the mass of a constituent mi divided by the volume of the mixture V:[1]

\rho_i = \frac {m_i}{V}

Contents

Definition and properties

The volume V in the definition refers to the volume of the solution, not the volume of the solvent. One liter of a solution usually contains either slightly more or slightly less than 1 liter of solvent because the process of dissolution causes volume of liquid to increase or decrease.

Dependence on volume

Mass concentration depends on the variation of the volume of the solution due mainly to thermal expansion.

Sum of mass concentration

The sum of the mass concentrations of all components (including the solvent) gives the density ρ of the solution:

 \rho = \sum_i  \rho_i \,

Thus, for pure component the mass concentration equals the density of the component.

Units

The SI-unit for mass concentration is kg/m3 (kilogram/cubic metre). However, more commonly the unit g/100mL is used, which is identical to g/dL (gram/decilitre).

Usage in biology

In biology, the unit "%" is sometimes incorrectly used to denote mass concentration, also called "weight/volume percentage", or "mass/volume percentage." A solution with 1 g of solute dissolved in a final volume of 100 mL of solution would be labeled as "1 %" or "1 % w/v" (weight/volume). The notation is mathematically flawed because the unit "%" can only be used for dimensionless quantities. "Percent solution" or "percentage solution" are thus terms best reserved for "weight percent solutions" (w/w = wt% = weight solute/weight total solution after mixing), or "volume percent solutions" (v/v = v% = volume solute per volume of total solution after mixing). The very ambiguous terms "percent solution" and "percentage solutions" with no other qualifiers, continue to occasionally be encountered.

This common usage of % to mean wt/v in biology is because of many biological solutions being dilute and water-based or an aqueous solution. Liquid water has a density of approximately 1 g/cm3 (1 g/ml) (water density). Thus 100 ml of water is equal to approximately 100 g. Therefore, a solution with 1 g of solute dissolved in final volume of 100 ml aqueous solution may also be considered 1 % w/w (1 g solute in 100 g water). This approximation breaks down as the solute concentration is increased. For an example, refer to the densities of water-NaCl mixtures (density of water with dissolved NaCl). High solute concentrations are often not physiologically relevant, but are occasionally encountered in pharmacology, where the weight per volume notation is still sometimes encountered. An extreme example is saturated solution of potassium iodide (SSKI) which attains 100 "%" wt/v potassium iodide mass concentration (1 gram KI per mL solution) only because the solubility of the dense salt KI is extremely high in water, and the resulting solution is very dense (1.72 times as dense as water).

Although there are examples to the contrary, it should be stressed that the commonly used "units" of % w/v are grams/milliliters (g/ml). 1% w/v solutions are sometimes thought of as being gram/100 ml but this detracts from the fact that % w/v is g/ml; 1 g of water has a volume of approximately 1 ml (at STP) and the mass concentration is said to be 100%. To make 10 ml of an aqueous 1% cholate solution, 0.1 grams of cholate are dissolved in 10 ml of water. Volumetric flasks are the most appropriate piece of glassware for this procedure as deviations from ideal solution behavior can occur with high solute concentrations.

In solutions, mass concentration is commonly encountered as the ratio of weight/[volume solution], or wt/volume. In water solutions containing relatively small quantities of dissolved solute (as in biology), such figures may be "percentivized" by multiplying by 100 a ratio of grams solute per mL solution. The result is given as "weight/volume percentage," or "mass/volume percentage." Such a convention expresses mass concentration of 1 gram of solute in 100 mL of solution, as "1 w/v %."

Related Quantities

Molar concentration

The conversion to molar concentration ci is given by:

c_i = \frac{\rho_i}{M_i}

where Mi is the molar mass of constituent i.

Mass fraction

The conversion to mass fraction wi is given by:

w_i = \frac{\rho_i}{\rho}

Mole fraction

The conversion to mole fraction xi is given by:

x_i = \frac{\rho_i}{\rho} \cdot \frac{M}{M_i}

where M is the average molar mass of the mixture.

Molality

For binary mixtures, the conversion to molality mi is given by:

m_i = \frac{\rho_i}{M_i (\rho - \rho_i)}

References

  1. ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version:  (2006–) "mass concentration".

Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Mass concentration — may refer to: Mass concentration (chemistry), the mass of a constituent divided by the volume of a mixture. Mass concentration (astronomy), a region of a planet or moon s crust that contains a large positive gravity anomaly. This disambiguation… …   Wikipedia

  • Mass fraction (chemistry) — In chemistry, the mass fraction wi is the fraction of one substance with mass mi to the mass of the total mixture mtot, defined as [1]: The sum of all the mass fractions is equal to 1: It is one way of expressing t …   Wikipedia

  • Mass concentration (astronomy) — For mass concentration in chemistry, see Concentration#Mass versus volume. Topography (top) and corresponding gravity (bottom) signal of lunar Mare Smythii containing a significant mascon. In astronomy or astrophysics mass concentration or mascon …   Wikipedia

  • Concentration — For other uses, see Concentration (disambiguation). In chemistry, concentration is defined as the abundance of a constituent divided by the total volume of a mixture. Four types can be distinguished: mass concentration, molar concentration,… …   Wikipedia

  • Concentration (disambiguation) — Concentration can refer to: Contents 1 Science, engineering, and technology 2 Psychology 3 Economics 4 Games 5 …   Wikipedia

  • Mass spectrometry — (MS) is an analytical technique that measures the mass to charge ratio of charged particles.[1] It is used for determining masses of particles, for determining the elemental composition of a sample or molecule, and for elucidating the chemical… …   Wikipedia

  • Chemistry — For other uses, see Chemistry (disambiguation). Chemistry is the science of atomic matter (that made of chemical elements), its properties, structure, comp …   Wikipedia

  • mass spectrometry — or mass spectroscopy Analytic technique by which chemical substances are identified by sorting gaseous ions by mass using electric and magnetic fields. A mass spectrometer uses electrical means to detect the sorted ions, while a mass spectrograph …   Universalium

  • Mass balance — A mass balance (also called a material balance) is an application of conservation of mass to the analysis of physical systems. By accounting for material entering and leaving a system, mass flows can be identified which might have been unknown,… …   Wikipedia

  • Mass attenuation coefficient — The mass attenuation coefficient is a measurement of how strongly a chemical species or substance absorbs or scatters light at a given wavelength, per unit mass. In addition to visible light, mass attenuation coefficients can be defined for other …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”