Methods to investigate protein–protein interactions

There are many methods to investigate protein–protein interactions. Each of the approaches has its own strengths and weaknesses, especially with regard to the sensitivity and specificity of the method. A high sensitivity means that many of the interactions that occur in reality are detected by the screen. A high specificity indicates that most of the interactions detected by the screen are also occurring in reality.

Biochemical methods

• Co-immunoprecipitation is considered to be the gold standard assay for protein–protein interactions, especially when it is performed with endogenous (not overexpressed and not tagged) proteins. The protein of interest is isolated with a specific antibody. Interaction partners which stick to this protein are subsequently identified by Western blotting.^[1] Interactions detected by this approach are considered to be real. However, this method can only verify interactions between suspected interaction partners. Thus, it is not a screening approach. A note of caution also is that immunoprecipitation experiments reveal direct and indirect interactions. Thus, positive results may indicate that two proteins interact directly or may interact via one or more bridging molecules. This could include bridging proteins, nucleic acids (DNA or RNA), or other molecules.
• Bimolecular fluorescence complementation (BiFC) is a new technique in observing the interactions of proteins. Combining with other new techniques, this method can be used to screen protein–protein interactions and their modulators,^[2] DERB.^[3]
• Affinity electrophoresis as used for estimation of binding constants, as for instance in lectin affinity electrophoresis or characterization of molecules with specific features like glycan content or ligand binding.
• Pull-down assays are a common variation of immunoprecipitation and immunoelectrophoresis and are used identically, although this approach is more amenable to an initial screen for interacting proteins.
• Label transfer can be used for screening or confirmation of protein interactions and can provide information about the interface where the interaction takes place. Label transfer can also detect weak or transient interactions that are difficult to capture using other in vitro detection strategies. In a label transfer reaction, a known protein is tagged with a detectable label. The label is then passed to an interacting protein, which can then be identified by the presence of the label.
• The yeast two-hybrid screen investigates the interaction between artificial fusion proteins inside the nucleus of yeast. This approach can identify binding partners of a protein in an unbiased manner.
• Phage display, used for the high-throughput screening of protein interactions
• In-vivo crosslinking of protein complexes using photo-reactive amino acid analogs was introduced in 2005 by researchers from the Max Planck Institute^[4] In this method, cells are grown with photoreactive diazirine analogs to leucine and methionine, which are incorporated into proteins. Upon exposure to ultraviolet light, the diazirines are activated and bind to interacting proteins that are within a few angstroms of the photo-reactive amino acid analog.
• Tandem affinity purification (TAP) method allows high throughput identification of protein interactions. In contrast to yeast two-hybrid approach the accuracy of the method can be compared to those of small-scale experiments^[5] and the interactions are detected within the correct cellular environment as by co-immunoprecipitation. However, the TAP tag method requires two successive steps of protein purification and consequently it can not readily detect transient protein–protein interactions. Recent genome-wide TAP experiments were performed by Krogan et al. and Gavin et al. providing updated protein interaction data for yeast organism.^[6][7]
• Chemical cross-linking is often used to "fix" protein interactions in place before trying to isolate/identify interacting proteins. Common crosslinkers for this application include the non-cleavable NHS-ester cross-linker, bissulfosuccinimidyl suberate (BS3); a cleavable version of BS3, dithiobis(sulfosuccinimidyl propionate) (DTSSP); and the imidoester cross-linker dimethyl dithiobispropionimidate (DTBP) that is popular for fixing interactions in ChIP assays.
• Chemical cross-linking followed by high mass MALDI mass spectrometry can be used to analyze intact protein interactions in place before trying to isolate/identify interacting proteins. This method detects interactions among non-tagged proteins and is available from CovalX.
• SPINE (Strepprotein interaction experiment)^[8] uses a combination of reversible crosslinking with formaldehyde and an incorporation of an affinity tag to detect interaction partners in vivo.
• Quantitative immunoprecipitation combined with knock-down (QUICK) relies on co-immunoprecipitation, quantitative mass spectrometry (SILAC) and RNA interference (RNAi). This method detects interactions among endogenous non-tagged proteins.^[9] Thus, it has the same high confidence as co-immunoprecipitation. However, this method also depends on the availability of suitable antibodies.
• Proximity ligation assay (PLA) in situ is an immunohistochemical method utilizing so called PLA probes for detection of proteins, protein interactions and modifications. Each PLA probes comes with a unique short DNA strand attached to it and bind either to species specific primary antibodies or consist of directly DNA-labeled primary antibodies.^[10][11] When the PLA probes are in close proximity, the DNA strands can interact through a subsequent addition of two other circle-forming DNA oligonucleotides. After joining of the two added oligonucleotides by enzymatic ligation, they are amplified via rolling circle amplification using a polymerase. After the amplification reaction, several-hundredfold replication of the DNA circle has occurred and flurophore or enzyme labeled complementary oligonucleotide probes highlight the product. The resulting high concentration of fluorescence or cromogenic signal in each single-molecule amplification product is easily visible as a distinct bright spot when viewed with either in a fluorescence microscope or a standard brightfield microscope.

Biophysical and theoretical methods

• Bio-Layer Interferometry is a label-free technology for measuring biomolecular interactions ^[12][13] (protein:protein or protein:small molecule). It is an optical analytical technique that analyzes the interference pattern of white light reflected from two surfaces: a layer of immobilized protein on the biosensor tip, and an internal reference layer. Any change in the number of molecules bound to the biosensor tip causes a shift in the interference pattern that can be measured in real-time, providing detailed information regarding the kinetics of association and dissociation of the two molecule molecules as well as the affinity constant for the protein interaction (ka, kd and KD). Due to sensor configuration, the technique is highly amenable to both purified and crude samples as well as high throughput screening experiments. The detection method can also be used to determine the molar concentration of analytes. Bio-layer interferometry was pioneered by the founders of ForteBio, an instrument manufacturer with headquarters in Menlo Park California.
• Dual polarisation interferometry (DPI) can be used to measure protein–protein interactions. DPI provides real-time, high-resolution measurements of molecular size, density and mass. While tagging is not necessary, one of the protein species must be immobilized on the surface of a waveguide. As well as kinetics and affinity, conformational changes during interaction can also be quantified.
• Static light scattering (SLS) measures changes in the Rayleigh scattering of protein complexes in solution and can non-destructively characterize both weak and strong interactions without tagging or immobilization of the protein. The measurement consists of mixing a series of aliquots of different concentrations or compositions with the anylate, measuring the effect of the changes in light scattering as a result of the interaction, and fitting the correlated light scattering changes with concentration to a model. Weak, non-specific interactions are typically characterized via the second virial coefficient. This type of analysis can determine the equilibrium association constant for associated complexes.^[14]
• Dynamic light scattering (DLS), also known as quasielastic light scattering (QELS), or photon correlation spectroscopy, processes the time-dependent fluctuations in scattered light intensity to yield the hydrodynamic radius of particles in solution. The hydrodynamic radius is the radius of a solid sphere with the same translational diffusion coefficient as that measured for the sample particle. As proteins associate, the average hydrodynamic radius of the solution increases. Application of the Method of Continuous Variation, otherwise known as the Job plot, with the solution hydrodynamic radius as the observable, enables in vitro determination of K_d, complex stoichiometry, complex hydrodynamic radius, and the ΔH° and ΔS° of protein–protein interactions.^[15] This technique does not entail immobilization or labeling. Transient and weak interactions can be characterized. Relative to static light scattering, which is based upon the absolute intensity of scattered light, DLS is insensitive to background light from the walls of containing structures. This insensitivity permits DLS measurements from 1 µL volumes in 1536 well plates, and lowers sample requirements into the femtomolar range. This technique is also suitable for screening of buffer components and/or small molecule inhibitors/effectors.
• Surface plasmon resonance can be used to analyze protein-protein interactions by measuring changes in adsorption of biopolymers onto a metal surface.^[16]
• Fluorescence polarization/anisotropy can be used to measure protein–protein or protein–ligand interactions. Typically one binding partner is labeled with a fluorescence probe (although sometimes intrinsic protein fluorescence from tryptophan can be used) and the sample is excited with polarized light. The increase in the polarization of the fluorescence upon binding of the labeled protein to its binding partner can be used to calculate the binding affinity.
• With fluorescence correlation spectroscopy, one protein is labeled with a fluorescent dye and the other is left unlabeled. The two proteins are then mixed and the data outputs the fraction of the labeled protein that is unbound and bound to the other protein, allowing you to get a measure of K_D and binding affinity. You can also take time-course measurements to characterize binding kinetics. FCS also tells you the size of the formed complexes so you can measure the stoichiometry of binding. A more powerful methods is fluorescence cross-correlation spectroscopy (FCCS) that employs double labeling techniques and cross-correlation resulting in vastly improved signal-to-noise ratios over FCS. Furthermore, the two-photon and three-photon excitation practically eliminates photobleaching effects and provide ultra-fast recording of FCCS or FCS data.
• Fluorescence resonance energy transfer (FRET) is a common technique when observing the interactions of only two different proteins.^[17]
• Protein activity determination by NMR multi-nuclear relaxation measurements, or 2D-FT NMR spectroscopy in solutions, combined with nonlinear regression analysis of NMR relaxation or 2D-FT spectroscopy data sets. Whereas the concept of water activity is widely known and utilized in the applied biosciences, its complement—the protein activity which quantitates protein–protein interactions—is much less familiar to bioscientists as it is more difficult to determine in dilute solutions of proteins; protein activity is also much harder to determine for concentrated protein solutions when protein aggregation, not merely transient protein association, is often the dominant process.^[18]
• Protein–protein docking, the prediction of protein–protein interactions based only on the three-dimensional protein structures from X-ray diffraction of protein crystals might not be satisfactory.^[19][20]
• Isothermal Titration Calorimetry (ITC), is considered as the most quantitative technique available for measuring the thermodynamic properties of protein–protein interactions and is becoming a necessary tool for protein–protein complex structural studies. This technique relies upon the accurate measurement of heat changes that follow the interaction of protein molecules in solution, without the need to label or immobilize the binding partners, since the absorption or production of heat is an intrinsic property of virtually all biochemical reactions. ITC provides information regarding the stoichiometry, enthalpy, entropy, and binding kinetics between two interacting proteins.^[21]
• Microscale Thermophoresis (MST), is a new method that enables the quantitative analysis of molecular interactions in solution at the microliter scale. The technique is based on the thermophoresis of molecules, which provides information about molecule size, charge and hydration shell. Since at least one of these parameters is typically affected upon binding, the method can be used for the analysis of each kind of biomolecular interaction or modification. The method works equally well in standard buffers and biological liquids like blood or cell-lysate. It is a free solution method which does not need to immobilize the binding partners. MST provides information regarding the binding affinity, stoichiometry, competition and enthalpy of two or more interacting proteins.^[22][23]

References

1. ^ Golemis E. (2002) Protein-protein interactions : A molecular cloning manual. Cold Spring Harbor, NY: Cold Spring Harbor Laboratory Press. ix, 682 p.
2. ^ Hu CD, Chinenov Y, Kerppola, TK. (2002). "Visualization of interactions among bZIP and Rel family proteins in living cells using bimolecular fluorescence complementation.". Molecular Cell 9: 789–798 9: 789. doi:10.1016/S1097-2765(02)00496-3. PMID 11983170. 
3. ^ Lu JP, Beatty LK, Pinthus JH. (2008). "Dual expression recombinase based (DERB) single vector system for high throughput screening and verification of protein interactions in living cells.". Nature Precedings <http://hdl.handle.net/10101/npre.2008.1550.2>. 
4. ^ Suchanek, M., Radzikowska, A., and Thiele, C. (2005). "Photo-leucine and photo-methionine allow identification of protein-protein interactions in living cells". Nature Methods 2 (4): 261–268. doi:10.1038/nmeth752. PMID 15782218. 
5. ^ Collins SR, Kemmeren P, Zhao XC, et al. (March 2007). "Toward a comprehensive atlas of the physical interactome of Saccharomyces cerevisiae". Mol. Cell Proteomics 6 (3): 439–50. doi:10.1074/mcp.M600381-MCP200. PMID 17200106. 
6. ^ Krogan NJ, Cagney G, Yu H, et al. (March 2006). "Global landscape of protein complexes in the yeast Saccharomyces cerevisiae". Nature 440 (7084): 637–43. doi:10.1038/nature04670. PMID 16554755. 
7. ^ Gavin AC, Aloy P, Grandi P, et al. (March 2006). "Proteome survey reveals modularity of the yeast cell machinery". Nature 440 (7084): 631–6. doi:10.1038/nature04532. PMID 16429126. 
8. ^ Herzberg C., Weidinger LA., Dörrbecker B., Hübner S., Stülke J. and Commichau FM. (2007). "SPINE: A method for the rapid detection and analysis of protein-protein interactions in vivo". Proteomics 7 (22): 4032–4035. doi:10.1002/pmic.200700491. PMID 17994626. 
9. ^ Selbach, M., Mann, M. (2006). "Protein interaction screening by quantitative immunoprecipitation combined with knockdown (QUICK)". Nature Methods 3 (12): 981–983. doi:10.1038/nmeth972. PMID 17072306. 
10. ^ Söderberg O, Gullberg M, Jarvius M, Ridderstråle K, Leuchowius KJ, Jarvius J, Wester K, Hydbring P, Bahram F, Larsson LG, Landegren U. Direct observation of individual endogenous protein complexes in situ by proximity ligation. Nat. Methods. 2006 Dec;3(12):995–1000.
11. ^ Jarvius M, Paulsson J, Weibrecht I, Leuchowius KJ, Andersson AC, Wählby C, Gullberg M, Botling J, Sjöblom T, Markova B, Ostman A, Landegren U, Söderberg O. In situ detection of phosphorylated platelet-derived growth factor receptor beta using a generalized proximity ligation method. Mol. Cell Proteomics, 2007 Sep;6(9):1500-9.
12. ^ Label-free Optical Biosensors in Drug Discovery. Fang, Y. Trends in Biopharmaceutical Industry, 2007, 3, 34–38
13. ^ Higher-throughput, label-free, real-time molecular interaction analysis. Rich, R. L.; Myszka, D. G. Analytical Biochemistry, 2007, 361, 1–6
14. ^ Arun K. Attri and Allen P. Minton (2005). "Composition gradient static light scattering: A new technique for rapid detection and quantitative characterization of reversible macromolecular hetero-associations in solution". Analytical Biochemistry 346 (1): 132–138. doi:10.1016/j.ab.2005.08.013. PMID 16188220. 
15. ^ Amy D. Hanlon, Michael I. Larkin, and Ryan M. Reddick. (2010). "Free-solution, label-free protein–protein interactions characterized by dynamic light scattering" (PDF). Biophysical Journal (http://www.cell.com/biophysj/fulltext/S0006-3495(09)01609-9)&#32;98 (2): 297–304. doi:10.1016/j.bpj.2009.09.061. PMC 2808485. PMID 20338851. http://download.cell.com/biophysj/pdf/PIIS0006349509016099.pdf?intermediate=true. 
16. ^ Fee, C.J., Fredericks-Short, F., Billikanti, J.M. and Damodaran, V. B. (2008) Measurement of Electrostatic Interactions of PEGylated Proteins Using a Novel Multi-Channel Surface Plasmon Resonance Technique. Recovery of Biological Products XIII, Quebec City, Quebec: 22–26 Jun 2008., http://pdfcast.org/pdf/measurement-of-electrostatic-interactions-of-proteins-using-multi-channel-surface-plasmon-resonance#
17. ^ Gadella TW Jr., FRET and FLIM techniques, 33. Imprint: Elsevier, ISBN 978-0-08-054958-3. (2008) 560 pages.
18. ^ #Baianu, I.C.; Kumosinski, Thomas (August 1993). "NMR Principles and Applications to Protein Structure, Activity and Hydration.". Ch.9 in Physical Chemistry of Food Processes: Advanced Techniques and Applications. (New York: Van Nostrand-Reinhold) 2: 338–420. ISBN 0-442-00582-2. 
19. ^ Bonvin AM (2006). "Flexible protein-protein docking". Current Opinion in Structural Biology 16 (2): 194–200. doi:10.1016/j.sbi.2006.02.002. PMID 16488145. 
20. ^ Gray JJ (2006). "High-resolution protein-protein docking". Current Opinion in Structural Biology 16 (2): 183–193. doi:10.1016/j.sbi.2006.03.003. PMID 16546374. 
21. ^ Bellucci M. 2010. Protein–protein interactions – a tool kit to puzzle out functional networks VDM Verlag Dr. Müller, 144pp ISBN 978-3-639-31160-0
22. ^ Wienken CJ et al. (2010). "Protein-binding assays in biological liquids using microscale thermophoresis.". Nature Communications 1 (7). Bibcode 2010NatCo...1E.100W. doi:10.1038/ncomms1093. http://www.nature.com/ncomms/journal/v1/n7/full/ncomms1093.html. 
23. ^ Baaske P et al. (2010). "Optical thermophoresis for quantifying the buffer dependence of aptamer binding.". Angewandte Chemie International Edition 49: 2238–2241. doi:10.1002/anie.200903998. PMID 20186894.