Norton Dominator

Norton Dominator
Norton Dominator
Manufacturer Norton Motorcycle Company
Also called 'Dommie'
Production 1948–1960s
Engine 497 cc (Model 7 and 88) 596 cc (Model 99) OHV air cooled parallel twin
Brakes Drum
Wheelbase 55.5 in (1,410 mm)
Seat height 31 in (787 mm)
Weight 395 lb (179 kg) (dry)
Fuel capacity 3.5 gallons (16 litres)

The Dominator is a twin cylinder motorcycle developed by Norton to compete against the Triumph Speed Twin. The original Dominator was designed in 1947 and 1948 by Bert Hopwood, who had been on the Speed Twin design team at Triumph.[1] This design set the pattern for Norton twins for the next 30 years.[2]

Contents

Model 7

The Dominator Model 7 had a 497 cc iron head iron cylinder parallel twin engine with a plunger frame and a Lucas K2F magneto. Norton stuck with a 360-degree crankshaft layout with a single camshaft at the front of the engine driven by gears and chain. Having the rockers integral with the head meant there were less gasket faces to leak, and less valve noise. The 66.0 × 72.6 mm (2.60 × 2.86 in) bore and stroke engine was a long stroke design, with mild tuning, resulting in more torque low down. In 1953 the Model 7 was upgraded with a single downtube swinging arm frame, 19-inch front wheel and 'pear shaped' silencers, still known as a Model 7.[3] The Model 7 continued in production through to 1955 and was often used with a side car as they could not be fitted to the Featherbed frame Dominators.

Model 88

The Featherbed frame, designed for Norton by the McCandless brothers, were made by the Reynolds company as the outdated Norton works did not have the necessary modern welding capacity for its manufacture.[4] It was this new Featherbed frame that led to the Model 88 Dominator, also called the Dominator De Luxe, which used the same 497 cc engine and was developed in 1951. Originally developed for export it was sold on the home market from 1953.[5] The 88 suffered from oil leaks from the primary chain case but it was the outdated and inefficient Norton works that resulted in quality control problems for the 200 Model 88's produced each week.[6]

Model 99

The 596cc featherbed framed Model 99 Dominator was introduced in 1956, as a larger capacity version alongside the 500 cc Model 88 version.[3] Due to the increased engine capacity, the 99 had a power output of 31 bhp, partly due also to a higher compression ratio possible with the alloy head introduced a year earlier. Full width alloy hubs with improved brakes had also been introduced a year earlier, preparatory for the capacity increase from 500 cc to 600 cc

Model 77

The first Model 77 was a rigid framed telescopic forked Dominator version of 500 cc produced from 1950, and supplied to the Australian market only. Only a few hundred were made, from 1950 to 1952. This used the all iron Dominator 500 cc twin engine, but with an oil pressure gauge in the tank.

The 596 cc Model 77 Dominator was introduced in late 1956. Essentially a swinging arm, single downtube ES2 chassis with a 600 cc Dominator 99 engine, it was in production at the same time as the Dominator 99 as a sidecar motorcycle but was dropped from production after 1957, when sidecar Featherbeds were introduced.[3]

Slimline Featherbed frames for 1960

From 1960, the featherbed frame for all Dominators was altered so that the frame tubes in front of the seat were narrower, for improved rider comfort. The seats and tanks and indeed the whole styling of the Dominator was redesigned to suit. A large metal tank badge completed the look, along with some 2 toned paint schemes. And some optional enclosed body styling on the "Deluxe" Models of the 88 and 99, along the lines of the 'bathtub' Triumph models.

1960 Manxman 650 and 1961 Dominator 650SS

A new 650 cc model was added to the lineup for 1960. The featherbed frame was altered so that the top rails were closer together at the front of the seat area to create what became known as the 'slimline featherbed'. A 650 cc engine was installed to create the Norton Manxman. First built from 7 November 1960 to September 1961, these machines were a Limited Edition for the USA only, in custom-cruiser style - with high handlebars, all Polychromatic blue paint and Bright red seat With white piping round the edge . In September 1961 the 650SS was introduced. It had USA cafe bar style and twin carburettors. The SS stood for Super Sports and the 600 cc models were discontinued to concentrate on production of the 650SS, which quickly earned a reputation as the "best of the Dommies".[5]

Racing

The Norton factory racing team briefly used race-tuned twin cylinder Dominators from circa 1960, but they were still outclassed by the Norton Manx. Doug Hele wanted to see the Dominator developed and produced a 55 bhp (41 kW) "Domiracer" that revved to 8,000 rpm. The Domiracer weighed 35 lb (16 kg) less than the Manx.[2] Dennis Greenfield and Fred Swift won the 500 cc class in the Thruxton 500 event in 1960 and Tom Phillis took the bike to third place and lapped at over 100 mph (161 km/h), a first for a pushrod motor and a first for any twin in the 1961 Isle of Man TT. Norton abandoned the Domiracer project a year later when the Bracebridge Street race shop closed and the Domiracer and factory spares were sold to Paul Dunstall, who continued with development and began producing Norton performance parts, eventually selling complete Norton Dunstall bikes, to customers including Steve McQueen.[3]

References

  1. ^ Brown, Roland (1999) (in English). The History of British Bikes. Parragon. ISBN 0-75253-153-0. 
  2. ^ a b Reynolds, Jim (1990) (in English). Best of British Bikes. Patrick Stephens Ltd. ISBN 1-85260-033-0. 
  3. ^ a b c d "Norton Dominator". http://www.classicbike.co.uk/pdf/506/197882.pdf. Retrieved 2008-11-15. 
  4. ^ "Norton Dominator, by Mick Walker". http://www.realclassic.co.uk/books/books06112800.html. Retrieved 2008-11-16. 
  5. ^ a b Kemp, Andrew; De Cet (2004). Classic British Bikes. Mirco. Bookmart Ltd. ISBN 1-86147-136-X. 
  6. ^ Melling, Frank (2003-09-27). "Classic bikes: Norton Dominator". The Daily Telegraph (London). http://www.telegraph.co.uk/motoring/motorbikes/2724812/Classic-bikes-Norton-Dominator.html. Retrieved 2008-11-14. 

Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Norton (Motorradhersteller) — Norton Norton war ein englischer Hersteller von Motorrädern. Keine andere Marke gewann so oft das klassische Rennen um die Tourist Trophy auf der Isle of Man. Inhaltsverzeichnis 1 Das Unternehmen und seine Geschicht …   Deutsch Wikipedia

  • Norton Motorcycle Company — Norton Motorcycles (UK) Ltd Industry Motorcycles Founded 1898 Headquarters Donington Park, United Kingdom …   Wikipedia

  • Norton — Motorcycles (UK) Ltd Год основания 1898 Основатели Джеймс Лэнсдаун Нортон Расположение …   Википедия

  • Norton Dunstall — Manufacturer Dunstall Motorcycles Production 1966–1975 Predecessor Norton Dominator Engine …   Wikipedia

  • Norton Commando — Manufacturer Norton Villiers Engine 828 cc (50.5 cu in) air cooled twin Power 51 bhp (38&# …   Wikipedia

  • Norton 650SS — Manufacturer Norton Motorcycles Production 1962 – 1967 Engine 646cc overhead valve, air cooled parallel twin Top speed …   Wikipedia

  • Norton Jubilee — Manufacturer Norton Motorcycles Production 1958 1966 Engine 249cc air cooled twin Powe …   Wikipedia

  • Norton Motorcycles — Firmenlogo 500 cm³ Einzylinder OHC Motor mit Köni …   Deutsch Wikipedia

  • Norton Atlas — Manufacturer Norton Motorcycles Engine 745cc air cooled twin Power 55 bhp (41 kW) at 6500 rpm …   Wikipedia

  • Norton (motocicleta) — Norton motorcycles. Fundación 1902 / 2008 Sede Birmingham / Donington,   …   Wikipedia Español

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”