Systems architect

Systems architect

In systems engineering, the systems architect is the high-level designer of a system to be implemented.They establish the basic structure of the system, defining the core design features that are hard to change later. They provide the vision for where the system needs to go and strive to maintain its integrity as it evolves.

Overview

In systems engineering, the systems architect is responsible for:
* Interfacing with the user(s) and sponsor(s) and all other stakeholders in order to determine their (evolving) needs.
* Generating the highest level of system requirements, based on the user's needs and other constraints such as cost and schedule.
* Ensuring that this set of high level requirements is consistent, complete, correct, and operationally defined.
* Performing cost-benefit analyses to determine whether requirements are best met by manual, software, or hardware functions; making maximum use of commercial off-the-shelf or already developed components.
* Developing partitioning algorithms (and other processes) to allocate all present and foreseeable requirements into discrete partitions such that a minimum of communications is needed among partitions, and between the user and the system.
* Partitioning large systems into (successive layers of) subsystems and components each of which can be handled by a single engineer or team of engineers or subordinate architect.
* Ensuring that a maximally robust architecture is developed.
* Generating a set of acceptance test requirements, together with the designers, test engineers, and the user, which determine that all of the high level requirements have been met, especially for the computer-human-interface.
* Generating products such as sketches, models, an early user guide, and prototypes to keep the user and the engineers constantly up to date and in agreement on the system to be provided as it is evolving.

Systems architect: Topics

Large systems architecture was developed as a way to handle systems too large for one person to conceive of, let alone design. Systems of this size are rapidly becoming the norm, so architectural approaches and architects are increasingly needed to solve the problems of large systems.

Users and Sponsors

Engineers as a group do not have a reputation for understanding and responding to human needs comfortably or for developing humanly functional and aesthetically pleasing products. Architects "are" expected to understand human needs and develop humanly functional and aesthetically pleasing products. A good architect is a translator between the user/sponsor and the engineers— and even among just engineers of different specialities. A good architect is also the principal keeper of the user's vision of the end product— and of the process of deriving requirements from and implementing that vision.

Determining what the users/sponsors actually need, rather than what they say they want, "is not engineering— it is an art." An architect does not follow an exact procedure. S/he communicates with users/sponsors in a highly interactive way— together they extract the true "requirements" necessary for the engineered system. The architect must remain constantly in communication with the end users. Therefore, the architect must be intimately familiar with the user's environment and problem. (The engineer need only be very knowledgeable of the potential engineering solution space.)

High level requirements

The user/sponsor should view the architect as the user's representative and provide "all input through the architect." Direct interaction with project engineers is generally discouraged as the chance of mutual misunderstanding is very high. The user requirements' specification should be a joint product of the user and architect: the user brings his needs and wish list, the architect brings knowledge of what is likely to prove doable within cost and time constraints. When the user needs are translated into a set of high level requirements is also the best time to write the first version of the acceptance test, which should, thereafter, be religiously kept up to date with the requirements. That way, the user will be absolutely clear about what s/he is getting. It is also a safeguard against untestable requirements, misunderstandings, and requirements creep.

The development of the first level of engineering requirements is not a purely analytical exercise and should also involve both the architect and engineer. If any compromises are to be made— to meet constraints like cost, schedule, power, or space, the architect must ensure that the final product and overall look and feel do not stray very far from the user's intent. The engineer should focus on developing a design that optimizes the constraints but ensures a workable and reliable product. The architect is primarily concerned with the comfort and usability of the product; the engineer is primarily concerned with the producibility and utility of the product. The provision of needed services to the user is the true function of an engineered system. However, as systems become ever larger and more complex, and as their emphases move away from simple hardware and software components, the narrow application of traditional systems development principles is found to be insufficient— the application of the more general principles of systems, hardware, and software architecture to the design of (sub)systems is seen to be needed. An architecture is also a simplified model of the finished end product— its primary function is to define the parts and their relationships to each other so that the whole can be seen to be a consistent, complete, and correct representation of what the user had in mind— especially for the computer-human-interface. It is also used to insure that the parts fit together and relate in the desired way.

It is necessary to distinguish between the architecture of the user's world and the engineered systems architecture. The former represents and addresses problems and solutions in the "user's" world. It is principally captured in the computer-human-interfaces (CHI) of the engineered system. The engineered system represents the "engineering" solutions— how the "engineer" proposes to develop and/or select and combine the components of the technical infrastructure to support the CHI. In the absence of an experienced architect, there is an unfortunate tendency to confuse the two architectures. But— the engineer thinks in terms of hardware and software and the technical solution space, whereas the user may be thinking in terms of solving a problem of getting people from point A to point B in a reasonable amount of time and with a reasonable expenditure of energy, or of getting needed information to customers and staff. A systems architect is expected to combine knowledge of both the architecture of the user's world and of (all potentially useful) engineering systems architectures. The former is a joint activity with the user; the latter is a joint activity with the engineers. The product is a set of high level requirements reflecting the user's requirements which can be used by the engineers to develop systems design requirements.

Because requirements evolve over the course of a project, especially a long one, an architect is needed until the system is accepted by the user: the architect is the best insurance that all changes and interpretations made during the course of development do not compromise the user's viewpoint.

Cost/benefit analyses

Most engineers are specialists. They know the applications of one field of engineering science intimately, apply their knowledge to practical situations— that is, solve real world problems, evaluate the cost/benefits of various solutions within their specialty, and ensure the correct operation of whatever they design. Architects are generalists. They are not expected to be experts in any one technology but are expected to be knowledgeable of many technologies and able to judge their applicability to specific situations. They also apply their knowledge to practical situations, but evaluate the cost/benefits of various solutions using different technologies, for example, hardware versus software versus manual, and assure that the system as a whole performs according to the user's expectations.

Many commercial-off-the-shelf or already developed hardware and software components may be selected independently according to constraints such as cost, response, throughput, etc. In some cases, the architect can already assemble the end system unaided. Or, s/he may still need the help of a hardware or software engineer to select components and to design and build any special purpose function. The architects (or engineers) may also enlist the aid of specialists— in safety, security, communications, special purpose hardware, graphics, human factors, test and evaluation, quality control, RMA, interface management, etc. An effective systems architectural team must have immediate access to specialists in critical specialties.,

Partitioning and layering

An architect planning a building works on the overall design, making sure it will be pleasing and useful to its inhabitants. While a single architect by himself may be enough to build a single-family house, many engineers may be needed, in addition, to solve the detailed problems that arise when a novel high-rise building is designed. If the job is large and complex enough, parts of the architecture may be designed as independent components. That is, if we are building a housing complex, we may have one architect for the complex, and one for each type of building, as part of an "architectural team."

Large automation systems also require an architect and much engineering talent. If the engineered system is large and complex enough, the systems architect may defer to a hardware architect and a software architect for parts of the job, although they all may be members of a joint architectural team. "But the architect must never be viewed as an engineering supervisor."

The architect should sub-allocate the system requirements to major components or subsystems that are within the scope of a single hardware or software engineer, or engineering manager or subordinate architect. (If the item is sufficiently large and/or complex, the chief architect will sub-allocate portions to more specialized architects.) Ideally, each such component/subsystem is a sufficiently stand-alone object that it can be tested as a complete component, separate from the whole, using only a simple testbed to supply simulated inputs and record outputs. That is, it is not necessary to know how an air traffic control system works in order to design and build a data management subsystem for it. It is only necessary to know the constraints under which the subsystem will be expected to operate.

A good architect ensures that the system, however complex, is built upon relatively simple and "clean" concepts for each (sub)system or layer and is easily understandable by everyone, especially the user, without special training. The architect will use a minimum of heuristics to ensure that each partition is well defined and clean of kludges, work-arounds, short-cuts, or confusing detail and exceptions. As user needs evolve, (once the system is fielded and in use), it is a lot easier subsequently to evolve a simple concept than one laden with exceptions, special cases, and lots of "fine print."

"Layering" the architecture is important for keeping the architecture sufficiently simple at each "layer" so that it remains comprehensible to a single mind. As layers are ascended, whole systems at "lower layers" become simple "components" at the "higher layers," and may disappear altogether at the "highest layers."

Acceptance test

The acceptance test always remain the principal responsibility of the architect(s). It is the chief means by which the architect will prove to the user that the system is as originally planned and that all subordinate architects and engineers have met their objectives. Large projects tend to be dynamic, with changes along the way needed by the user (e.g., as his problems change), or expected of the user (e.g., for cost or schedule reasons). But acceptance tests must be kept current at all times. They are the principal means by which the user is kept informed as to how the final product will perform. And they act as the principal goal towards which all subordinate personnel must design and test for..

Providing good communications with users and engineers

A building architect uses sketches, models, drawings. An automation systems (or software or hardware) architect should use sketches, models, and prototypes to discuss different solutions and results with users, engineers, and other architects. An early, draft version of the user's manual is invaluable, especially in conjunction with a prototype. A set of (engineering) "requirements" as a sole, or even principal, means of communicating with the users is explicitly to be avoided. Nevertheless, it is important that a workable, well written "set of requirements," or specification, be created which is understandable to the customer (so that they can properly sign off on it). But it must use precise and unambiguous language so that designers and other implementers are left in no doubt as to meanings or intentions. In particular, all requirements must be testable, and the initial draft of the test plan should be developed contemporaneously with the requirements. All stakeholders should sign off on the acceptance test descriptions, or equivalent, as the sole determinant of the satisfaction of the requirements, at the outset of the program.

Further reading

* Mark W. Maier and Rechtin, Eberhardt, "The Art of Systems Architecting", Second Edition (June, 2000)
* Eberhardt Rechtin, "Systems Architecting: Creating & Building Complex Systems", 1991.
* Rob Williams, "Computer Systems Architecture: a Networking Approach", Second Edition (December, 2006).

References

See also

* Business analyst
* Enterprise architect
* Hardware architecture, Hardware architect
* Requirements analysis,
* Software architecture, Software architect
* Software engineering, Software engineer
* Systems architecture
* Systems engineering, Systems engineer
* Systems design
* Service-Oriented Modeling Framework (SOMF)

External links

* [http://www.sei.cmu.edu/architecture/ThingsToDoInDenver.htm Things to Do in Denver When You're an Architect] discussion of systems architecture design by Rob van Ommering

* [http://www.informit.com/articles/article.aspx?p=169564 Systems Architecture : Canaxia Brings an Architect on Board] , Article.


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • systems architect — UK US noun [C] ► IT SYSTEMS ANALYST(Cf. ↑systems analyst) …   Financial and business terms

  • Architect (disambiguation) — Architect may refer to one of the following. *Architect, a degree or job title of professionals who practice the various forms of architecture *Architect (The Matrix), a character in the latter two Matrix films *Systems architect, a systems… …   Wikipedia

  • systems analyst — ➔ analyst * * * systems analyst UK US noun [C] (also computer analyst, also systems architect) ► IT someone whose job is to decide what computer programs an organization needs in order to work effectively, and then design them: »The work of a… …   Financial and business terms

  • Systems architecture — A system architecture or systems architecture is the conceptual design that defines the structure and/or behavior of a system. There is no universally agreed definition of which aspects constitute a system architecture, and various organizations… …   Wikipedia

  • Systems Design — Systems Engineering Techniken werden in komplexen Entwicklungsprojekten angewendet Systems Engineering (auch Systems Design oder Systems Design Engineering) ist ein interdisziplinärer Ansatz, um komplexe technische Systeme in großen Projekten zu… …   Deutsch Wikipedia

  • Systems Design Engineering — Systems Engineering Techniken werden in komplexen Entwicklungsprojekten angewendet Systems Engineering (auch Systems Design oder Systems Design Engineering) ist ein interdisziplinärer Ansatz, um komplexe technische Systeme in großen Projekten zu… …   Deutsch Wikipedia

  • Systems Engineer — Systems Engineering Techniken werden in komplexen Entwicklungsprojekten angewendet Systems Engineering (auch Systems Design oder Systems Design Engineering) ist ein interdisziplinärer Ansatz, um komplexe technische Systeme in großen Projekten zu… …   Deutsch Wikipedia

  • Systems Engineering — Techniken werden in komplexen Entwicklungsprojekten angewendet Systems Engineering (auch Systems Design oder Systems Design Engineering) ist ein interdisziplinärer Ansatz, um komplexe technische Systeme in großen Projekten zu entwickeln und zu… …   Deutsch Wikipedia

  • Systems engineering — Techniken werden in komplexen Entwicklungsprojekten angewendet Systems Engineering (auch Systems Design oder Systems Design Engineering) ist ein interdisziplinärer Ansatz, um komplexe technische Systeme in großen Projekten zu entwickeln und zu… …   Deutsch Wikipedia

  • Systems analysis — is the interdisciplinary part of Science, dealing with analysis of sets of interacting or entities, the systems, often prior to their automation as computer systems, and the interactions within those systems. This field is closely related to… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”