Oxygen plant

Oxygen plant

Oxygen absorption plants is the modern non-cryogenic gas separation system. Plants based on absorption and sometimes membrane technology.

Contents

Application

Oxygen finds broad application in various technological processes and in almost all industry branches. The primary oxygen application is associated with its capability of sustaining burning process, and the powerful oxidant properties.

Due to that, oxygen has become widely used in the metal processing, welding, cutting and brazing processes. In the chemical and petrochemical industries, as well as in the oil and gas sector oxygen is used in commercial volumes as an oxidizer in chemical reactions.

The use of oxygen in gas-flame operations, such as metal welding, cutting and brazing is one of the most significant and common applications of this gas. Oxygen allows generating high-temperature flame in welding torches thus ensuring high quality and speed of work performance.

  • Metal industry

Oxygen is heavily used in the metal industry where it helps to increase burning temperature by the production of ferrous and non-ferrous metals and significantly improve the overall process efficiency. Another important oxygen application in the metal industry is connected with its use for carbon fixation with the yield of carbon dioxide.

  • Chemical and petrochemical industries

In the chemical and petrochemical industries, oxygen is widely used for oxidation of raw chemicals for recovery of nitric acid, ethylene oxide, propylene oxide, vinyl chloride and other important chemical compounds.

  • Oil and gas industry

In the oil and gas industry, oxygen finds application as a means for viscosity improvement and enhancement of oil-and-gas flow properties. Oxygen is also used for boosting production capacity of oil cracking plants, efficiency of high-octane components processing, as well as for the reduction of sulfuric deposits in refineries.

  • Fish farming

The use of oxygen in the fish farming helps increase the survival and fertility ratios and reduce the incubation period. Along with fish culture, oxygen is applied for shrimps, crabs and mussels rearing.

  • Glass industry

In glass furnaces oxygen is effectively used for burning temperature increase and burning processes improvement.

  • Waste management

The use of oxygen in incinerators allows to significantly increase flame temperature and eventually ensure enhanced cost efficiency and incinerators production capacity.

Adsorption technology

Type of performance on semitrailer

Adsorption principle

Gas separation by adsorption systems is based on the fixation of various gas mixture components by a solid substance called adsorbent. Physically, this phenomenon is brought about by the forces of gas and adsorbent molecules interaction.

Functional diagram of work of oxygen plant

Temperature and pressure influence

The current methods of gaseous oxygen production from air with the use of adsorption technology are nearly brought to perfection. The operation of a modern oxygen adsorption plant is based on the dependence of gas intake by adsorbent on the temperature and partial pressure of a gas component.

The gas adsorption and adsorbent regeneration processes may therefore be regulated by varying of the pressure and temperature parameters.

Pressure swing adsorption

The oxygen plant flow process is arranged in such a way that highly absorbable gas mixture components are taken in by adsorbent, while low absorbable and non-absorbable components go through the plant. Today, there exist three methods of arranging the adsorption-based air separation process with the use of swing technologies: pressure (PSA), vacuum (VSA) and mixed (VPSA) ones. In the pressure swing adsorption flow processes, oxygen is recovered under above-atmospheric pressure and regeneration is achieved under atmospheric pressure. In vacuum swing adsorption flow processes, oxygen is recovered under atmospheric pressure, and regeneration is achieved under negative pressure. The mixed systems operation combines pressure variations from positive to negative.

Adsorption oxygen plants

The adsorption oxygen plants produce 5 to 5,000 nm3/hr of oxygen with the purity if 93-95%. These systems designated for indoor operation are set to effectively produce gaseous oxygen from atmospheric air.

An unquestionable advantage of adsorption-based oxygen plants is the low cost of oxygen produced in the cases where there are no rigid requirements to the product oxygen purity.

Structurally, the adsorption oxygen plant consists of several adsorbers, the compressor unit, pre-purifier unit, valve system and the plant control system.

A simple adsorber is a column filled with layers of specially selected adsorbents – granular substances preferentially adsorbing highly adsorbable components of a gas mixture.

Where gaseous oxygen purity is required at the level of 90-95% with the capacity of up to 5,000 nm3 per hour, adsorption oxygen plants are the optimal choice. This oxygen purity may also be obtained through the use of systems based on the cryogenic technology; however, cryogenic plants are more cumbersome and complex in operation.

Membrane technology

Membrane oxygen equipment

Innovation technology available today

Some companies produce high-efficiency systems for oxygen production from atmospheric air with the help of membrane technology.

Membrane operation principle

The basis of gas media separation with the use of membrane systems is the difference in velocity with which various gas mixture components permeate membrane substance. The driving force behind the gas separation process is the difference in partial pressures on different membrane sides.

Membrane cartridge

A modern gas separation membrane used by GRASYS is no longer a flat plate, but is formed by hollow fibers. Membrane consists of a porous polymer fiber with the gas separation layer applied to its external surface. Structurally, a hollow fiber membrane is configured as a cylindrical cartridge representing a spool with specifically reeled polymer fiber.

Membrane cartridge

Compressor and vacuum technologies

Due to the membrane material high permeability for oxygen in contrast to nitrogen, the design of membrane oxygen complexes requires a special approach. Basically, there are two membrane-based oxygen production technologies: compressor and vacuum ones.

In the case of compressor technology, air is supplied into the fiber space under excess pressure, oxygen exits the membrane under slight excess pressure, and where necessary, is pressurized by booster compressor to the required pressure level. By the use of vacuum technology, a vacuum pump is used for the achievement of partial pressures difference.

Membrane oxygen plants

Designed for indoor operation, membrane oxygen plants allow efficient air enrichment with oxygen up to the concentration of 30-45%. The complexes are rated to 5 to 5,000 nm3/hr of oxygenated air.

In the membrane oxygen plant, gas separation is achieved in the gas separation module composed of hollow-fiber membranes and representing the plant critical and high-technology unit. Apart from the gas separation unit, other important technical components are the booster compressor or vacuum pump, pre-purifier unit, and the plant control system.

The adoption of membrane systems for air enrichment purposes promises multiple oxygen savings where the oxygen concentration of 30-45% is sufficient to cover process needs. In addition to customer saving on the product oxygen cost, there is a collateral economic effect based on extremely low operating costs.

With the incorporation of the membrane technology, oxygen plants have outstanding technical characteristics. Membrane oxygen plants are highly reliable due to the absence of moving parts in the gas separation module.

The systems are very simple in operation – control of all operating parameters is carried out automatically. Because of the plants high automation degree, no constant manned attendance is required during its operation.

Membrane oxygen plants are finding increasingly broad application in various industries all over the world. With moderate requirements to oxygen purity in product - up to 30-45%, membrane systems generally prove more economically sound than adsorption and cryogenic systems. Besides, membrane plants are much simpler in operation and more reliable.

Advantages of adsorption and membrane oxygen plants

  • Complete automation and simplicity of operation;
  • No manned attendance required during operation;
  • Enhanced failure safety and reliability;
  • Quick start and stop ;
  • Moderate dimensions and light weight ;
  • Low noise level;
  • Extended operational life;
  • Low operating costs;
  • No special workshop requirements;
  • Easy installation and integration into an existing air system.

Disadvantages

  • Relativity low oxygen purity - 93-95% for adsorption and 30-45% for membrane plants;
  • Limited capacity.

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Cryogenic oxygen plant — A cryogenic oxygen plant is an industrial facility that creates molecular oxygen at relatively high purity. Oxygen is the most common element in the world and the second largest industrial gas. The purity of oxygen can only be generated by… …   Wikipedia

  • Oxygen — This article is about the chemical element and its most stable form, O2 or dioxygen. For other forms of this element, see Allotropes of oxygen. For other uses, see Oxygen (disambiguation). nitrogen ← oxygen → fluorine ↑ O ↓ …   Wikipedia

  • plant disease — ▪ plant pathology Introduction       an impairment of the normal state of a plant that interrupts or modifies its vital functions.       All species of plants, wild and cultivated alike, are subject to disease. Although each species is… …   Universalium

  • Oxygen-18 — Full table General Name, symbol Oxygen 18,18O or Ω Neutrons 10 Protons 8 …   Wikipedia

  • Plant nutrition — is the study of the chemical elements that are necessary for plant growth. There are several principles that apply to plant nutrition.Some elements are essential, meaning that the absence of a given mineral element will cause the plant to fail to …   Wikipedia

  • Oxygen evolution — is the process of generating molecular oxygen through chemical reaction. Mechanisms of oxygen evolution include the oxidation of water during oxygenic photosynthesis, electrolysis of water into oxygen and hydrogen, and electrocatalytic oxygen… …   Wikipedia

  • Oxygen (novel) — Oxygen   …   Wikipedia

  • Plant — Plant, n. [AS. plante, L. planta.] 1. A vegetable; an organized living being, generally without feeling and voluntary motion, and having, when complete, a root, stem, and leaves, though consisting sometimes only of a single leafy expansion, or a… …   The Collaborative International Dictionary of English

  • Plant bug — Plant Plant, n. [AS. plante, L. planta.] 1. A vegetable; an organized living being, generally without feeling and voluntary motion, and having, when complete, a root, stem, and leaves, though consisting sometimes only of a single leafy expansion …   The Collaborative International Dictionary of English

  • Plant cutter — Plant Plant, n. [AS. plante, L. planta.] 1. A vegetable; an organized living being, generally without feeling and voluntary motion, and having, when complete, a root, stem, and leaves, though consisting sometimes only of a single leafy expansion …   The Collaborative International Dictionary of English

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”