Airbus Beluga

Airbus Beluga

infobox Aircraft
name = A300-600ST Beluga
caption = Beluga in current colours
type = Outsize cargo freight aircraft
manufacturer = EADS (Airbus S.A.S.)



designer =
first flight = 13 September 1994
introduced = September 1995
retired =
number built =5
status = In service
unit cost = N/A
primary user = Airbus Transport International
developed from = Airbus A300-600
variants with their own articles =

The Airbus A300-600ST ("Super Transporter)" or Beluga is a version of the standard A300-600 wide-body airliner modified to carry aircraft parts and over-sized or awkward cargo. It was officially called the "Super Transporter" at first, but the name "Beluga" became popular and has now been officially adopted.

Development

Several major aircraft manufacturers are multinational, and it is not unusual for them to have plants in widely separated locations. Airbus, however, is unique in that it was a consortium formed by the major French, British, German, and Spanish aerospace companies, and the geographic location of Airbus manufacturing is not merely a matter of cost and convenience, it is also a matter of history, national interest and pride. In consequence, each of the Airbus partners makes an entire aircraft section, which needs to be transported to a central location for final assembly. The details vary from one model to another, but the general arrangement is for the wings and landing gear to be made in the UK, the tail and doors in Spain, the fuselage in Germany, and the nose and center-section in France; all being assembled in either Toulouse, France or Hamburg, Germany.

When Airbus started in 1970, the first few components were delivered by road, but growing production soon necessitated a switch to air transport. From 1972 onwards, a fleet of four highly modified "Super Guppies" took over. These were former Boeing Stratocruisers from the 1940s, converted with custom fuselages and turbine engines to carry large volume loads for the 1960s NASA space program, leading to the jibe that 'every Airbus is delivered on the wings of a Boeing'. As time went by, the Super Guppies grew increasingly unsatisfactory for Airbus's ferrying needs: their age meant that operating expenses were high and ever-increasing, and growing Airbus production required greater capacity.

In 1991 Aérospatiale and DASA, two of the major Airbus partners, formed a company to develop a replacement. The starting point was the design for the wide-body twin-engined Airbus A300: the wings, engines, landing gear, and the lower part of the fuselage are the same as the A300 while the upper part of the fuselage is an enormous horseshoe-shaped structure m to ft| 7.7|abbr=on|precision=1|wiki=yes in diameter. To provide access to the cargo area from the front without having to disconnect all electrical, hydraulic and flight control connections (not to mention the lengthy recalibrations before each flight the reconnection entailed), the standard A300 cockpit was moved down below the cargo floor level and a m to ft| 17|abbr=on|precision=1|wiki=yes-highdisputed-inline cargo door fitted. Finally, the tail structure was enlarged and strengthened to maintain directional stability.

Construction began in September 1992, and the first flight took place in September 1994. After 335 hours of test flying, certification was awarded in September 1995, and the A300-600ST "Beluga" entered service. Four more Belugas were constructed, at a rate of roughly one per year, and all five remain in regular service. Their primary task is to carry Airbus components ready for final assembly across Europe to Toulouse or Hamburg, but they are also available for charter work, and have been used to carry a variety of special loads, including space station components, large, very delicate artwork, industrial machinery, and entire helicopters. (One Beluga was chartered to carry two complete NHI NH90s and a Eurocopter Tiger from Europe to Australia and back). The A300-600ST's freight compartment is m to ft| 7.4|abbr=on|precision=1|wiki=yes in diameter and m to ft| 37.7|abbr=on|precision=1|wiki=yes long; maximum payload is 47 tons. At 153.9 tons its maximum take-off weight is comparable to a normal A300, showing that the Beluga was intended for large but relatively light cargo.

The main deck cargo volume of the Beluga is greater than that of the C-5 Galaxy or the Antonov An-124. [ [http://www.airbus.com/en/aircraftfamilies/beluga/index.html Introduction and overview of the Beluga Family] ]

pecifications

ee also

aircontent
related=
* Airbus A300
similar aircraft=
* Aero Spacelines Super Guppy
* Boeing 747 Large Cargo Freighter
see also=
* List of civil aircraft

References

External links

* [http://www.airbustransport.com/ Airbus Transport]


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Airbus Beluga — Airbus A300 …   Deutsch Wikipedia

  • Airbus Beluga — Saltar a navegación, búsqueda A300 600ST Beluga El Beluga con su peculiar forma. Tipo Avión de transporte de cargas voluminosas. Fabricante …   Wikipedia Español

  • Airbus Beluga — A300 600ST Beluga Airbus Beluga (A300 600ST) на взлетной полосе Тип грузовой самолёт Разработчик Airbus Первый полёт 13 сентября 1994 Начало эксплуатации сентябрь 1995 Статус эксплуатируется Основные экс …   Википедия

  • Airbus Beluga — El Airbus Beluga, también conocido como Airbus A300 600ST es un avión de carga, especializado en cargas voluminosas, diseñado por Airbus a partir del A300, con grandes modificaciones para poder llevar cargas de gran tamaño. Debido a su historia y …   Enciclopedia Universal

  • Airbus Beluga (A300-600ST) — Airbus A300 …   Deutsch Wikipedia

  • Airbus A300-600ST Beluga — Airbus A300 …   Deutsch Wikipedia

  • Airbus 300 — Airbus A300 …   Deutsch Wikipedia

  • Airbus A300 — Airbus A300 …   Deutsch Wikipedia

  • Airbus A300-600 — Airbus A300 …   Deutsch Wikipedia

  • Airbus A300-600F — Airbus A300 …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”