Fanning friction factor

Fanning friction factor

The Fanning friction factor is a dimensionless number used in fluid flow calculations. It is related to the Shear stress at the wall as:

: au = frac{ f ho v^2}{2}

where:

* au is the shear stress at the wall
*f is the Fanning friction factor of the pipe
*v is the fluid velocity in the pipe
* ho is the density of the fluid

The wall shear stress can, in turn, be related to the pressure loss by multiplying the wall shear stress by the wall area (2 pi R L for a pipe) and dividing by the cross-sectional flow area ( pi R^2 for a pipe).

The friction head can be related to the pressure loss due to friction by dividing the pressure loss by the product of the acceleration due to gravity and the density of the fluid. Accordingly, the relationship between the friction head and the Fanning friction factor is:

:h_f = frac{ 2fv^2L}{g D}

where:

*h_f is the friction loss (in head) of the pipe.
*f is the Fanning friction factor of the pipe.
*v is the fluid velocity in the pipe.
*L is the length of pipe.
*g is the local acceleration of gravity.
*D is the pipe diameter.

Fanning friction factor formulæ

This friction factor is one-fourth of the Darcy friction factor, so attention must be paid to note which one of these is meant in the "friction factor" chart or equation consulted. Of the two, the Fanning friction factor is the more commonly used by Chemical Engineers and those following the British convention.

Special cases of the Fanning friction factor are given below. Other values may be derived from the Darcy friction factor formulæ article.

f=16/Re is the friction factor for laminar flow in round tubes.

For a square channel this becomes 14.227/Re.

References

*Shah R.K. and A.L. London, 1978, 'Laminar Flow Forced Convection in Ducts', Supplement 1 in Advances in Heat Transfer, Academic, NY, 1978.
*Rohsenhow, W.M., J.P. Hartnett and E.N. Ganic, 1985, 'Handbook of Heat Transfer Fundamentals, 2nd Ed., McGraw-Hill Book Company.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Friction factor — can refer to:* Darcy friction factor * Fanning friction factor * Atkinson friction factor (ventilation of mines) See also *coefficient of friction …   Wikipedia

  • Atkinson friction factor — is a measure of the resistance to airflow of a duct. It is widely used in the mine ventilation industry but is rarely referred to outside of it.Atkinson friction factor is represented by the symbol k and has the same units as air density… …   Wikipedia

  • Darcy friction factor formulae — In fluid dynamics, the Darcy friction factor formulae are equations based on experimental data and theory for the Darcy friction factor. The Darcy friction factor is a dimensionless quantity used in the Darcy–Weisbach equation, for the… …   Wikipedia

  • Fanning — can refer to:* Tabuaeran, also known as Fanning Atoll or Fanning Island, one of the Line Islands of the central Pacific Ocean. * Fanning (firearms), a revolver shooting technique in which one hand holds the revolver and the other hits the… …   Wikipedia

  • Darcy–Weisbach equation — In fluid dynamics, the Darcy–Weisbach equation is a phenomenological equation, which relates the head loss or pressure loss due to friction along a given length of pipe to the average velocity of the fluid flow. The equation is named after Henry… …   Wikipedia

  • Darcy-Weisbach equation — The Darcy Weisbach equation is an important and widely used phenomenological equation in hydraulics. It relates the head loss or pressure loss due to friction along a given length of pipe to the average velocity of the fluid flow. Head loss form… …   Wikipedia

  • Moody chart — The Moody chart or Moody diagram is a graph in non dimensional form that relates the Darcy friction factor, Reynolds number and relative roughness for fully developed flow in a circular pipe. It can be used for working out pressure drop or flow… …   Wikipedia

  • Dimensionless quantity — In dimensional analysis, a dimensionless quantity or quantity of dimension one is a quantity without an associated physical dimension. It is thus a pure number, and as such always has a dimension of 1.[1] Dimensionless quantities are widely used… …   Wikipedia

  • Atkinson resistance — is commonly used in mine ventilation to characterise the resistance to airflow of a duct of irregular size and shape, such as a mine roadway. It has the symbol R and is used in the square law for pressure drop,:Delta P = frac{ ho {actual{ ho… …   Wikipedia

  • Fanno flow — refers to adiabatic flow through a constant area duct where the effect of friction is considered. Compressibility effects often come into consideration, although the Fanno flow model certainly also applies to incompressible flow. For this model,… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”