Neutron moderator

Neutron moderator
Currently operating nuclear power reactors by moderator
Moderator Reactors Design Country
none (fast) 1 BN-600 Russia (1)
graphite 29 AGR, Magnox, RBMK United Kingdom (18), Russia (11)
heavy water 29 CANDU Canada (17), South Korea (4), Romania (2),
China (2), India (2), Argentina, Pakistan
light water 359 PWR, BWR 27 countries

In nuclear engineering, a neutron moderator is a medium that reduces the speed of fast neutrons, thereby turning them into thermal neutrons capable of sustaining a nuclear chain reaction involving uranium-235.

Commonly used moderators include regular (light) water (roughly 75% of the world's reactors), solid graphite (20% of reactors) and heavy water (5% of reactors).[1] Beryllium has also been used in some experimental types, and hydrocarbons have been suggested as another possibility.

Contents

Moderation

Neutrons are normally bound into an atomic nucleus, and do not exist free for long in nature. The unbound neutron has a half-life of just under 15 minutes. The release of neutrons from the nucleus requires exceeding the binding energy of the neutron, which is typically 7-9 MeV for most isotopes. Neutron sources generate free neutrons by a variety of nuclear reactions, including nuclear fission and nuclear fusion. Whatever the source of neutrons, they are released with energies of several MeV.

Since the kinetic energy, E, can be related to temperature via:

E=\frac{1}{2}mv^2=\frac{3}{2}k_B T

the characteristic neutron temperature of a several-MeV neutron is several tens of millions of degrees Celsius.

Moderation is the process of the reduction of the initial high kinetic energy of the free neutron. Since energy is conserved, this reduction of the neutron kinetic energy takes place by transfer of energy to a material known as a moderator. It is also known as neutron slowing down, since along with the reduction of energy comes a reduction in speed.

The probability of scattering of a neutron from a nucleus is given by the scattering cross section. The first couple of collisions with the moderator may be of sufficiently high energy to excite the nucleus of the moderator. Such a collision is inelastic, since some of the kinetic energy is transformed to potential energy by exciting some of the internal degrees of freedom of the nucleus to form an excited state. As the energy of the neutron is lowered, the collisions become predominantly elastic, i.e., the total kinetic energy and momentum of the system (that of the neutron and the nucleus) is conserved.

Given the mathematics of elastic collisions, as neutrons are very light compared to most nuclei, the most efficient way of removing kinetic energy from the neutron is by choosing a moderating nucleus that has near identical mass.

Elastic collision of equal masses

A collision of a neutron, which has mass of 1, with a 1H nucleus (a proton) could result in the neutron losing virtually all of its energy in a single head-on collision. More generally, it is necessary to take into account both glancing and head-on collisions. The mean logarithmic reduction of neutron energy per collision, ξ, depends only on the atomic mass, A, of the nucleus and is given by:

\xi= \ln\frac{E_0}{E}=1+\frac{(A-1)^2}{2A}\ln\left(\frac{A-1}{A+1}\right).[2]

This can be reasonably approximated to the very simple form \xi\simeq \frac{2}{A+1}.[3] From this one can deduce n, the expected number of collisions of the neutron with nuclei of a given type that is required to reduce the kinetic energy of a neutron from E0 to E: n=\frac{1}{\xi}(\ln E_0-\ln E). [3]

In a system at thermal equilibrium, neutrons (red) are elastically scattered by a hypothetical moderator of free hydrogen nuclei (blue), undergoing thermally activated motion. Kinetic energy is transferred between particles. As the neutrons have essentially the same mass as protons and there is no absorption, the velocity distributions of both particles types would be well-described by a single Maxwell–Boltzmann distribution.

Choice of moderator materials

Some nuclei have larger absorption cross sections than others, which removes free neutrons from the flux. Therefore, a further criterion for an efficient moderator is one for which this parameter is small. The moderating efficiency gives the ratio of the macroscopic cross sections of scattering, Σs, weighted by ξ divided by that of absorption, Σa: i.e., \frac{\xi\Sigma_s}{\Sigma_a}. [2] For a compound moderator composed of more than one element, such as light or heavy water, it is necessary to take into account the moderating and absorbing effect of both the hydrogen isotope and oxygen atom to calculate ξ. To bring a neutron from the fission energy of E0 2 MeV to an E of 1 eV takes an expected n of 16 and 29 collisions for H2O and D2O, respectively. Therefore, neutrons are more rapidly moderated by light water, as H has a far higher Σs. However, it also has a far higher Σa, so that the moderating efficiency is nearly 80 times higher for heavy water than for light water.[2]

The ideal moderator is of low mass, high scattering cross section, and low absorption cross section.

Distribution of neutron velocities once moderated

After sufficient impacts, the speed of the neutron will be comparable to the speed of the nuclei given by thermal motion; this neutron is then called a thermal neutron, and the process may also be termed thermalization. Once at equilibrium at a given temperature the distribution of speeds (energies) expected of rigid spheres scattering elastically is given by the Maxwell–Boltzmann distribution. This is only slightly modified in a real moderator due to the speed (energy) dependence of the absorption cross-section of most materials, so that low-speed neutrons are preferentially absorbed,[3][4] so that the true neutron velocity distribution in the core would be slightly hotter than predicted.

Reactor moderators

In a thermal nuclear reactor, the nucleus of a heavy fuel element such as uranium absorbs a slow-moving free neutron, becomes unstable, and then splits ("fissions") into two smaller atoms ("fission products"). The fission process for 235U nuclei yields two fission products: two to three fast-moving free neutrons, plus an amount of energy primarily manifested in the kinetic energy of the recoiling fission products. The free neutrons are emitted with a kinetic energy of ~2 MeV each. Because more free neutrons are released from a uranium fission event than thermal neutrons are required to initiate the event, the reaction can become self sustaining — a chain reaction — under controlled conditions, thus liberating a tremendous amount of energy (see article Nuclear Fission).

Fission cross section, measured in barns (a unit equal to 10−28 m2), is a function of the energy of the neutron colliding with a 235U nucleus. Fission probability decreases as neutron energy (and speed) increases. This explains why most reactors fueled with 235U need a moderator to sustain a chain reaction and why removing a moderator can shut down a reactor.

The probability of further fission events is determined by the fission cross section, which is dependent upon the speed (energy) of the incident neutrons. For thermal reactors, high-energy neutrons in the MeV-range are much less likely to cause further fission. (Note: It is not impossible for fast neutrons to cause fission, just much less likely.) The newly-released fast neutrons, moving at roughly 10% of the speed of light, must be slowed down or "moderated," typically to speeds of a few kilometres per second, if they are to be likely to cause further fission in neighbouring 235U nuclei and hence continue the chain reaction. This speed happens to be equivalent to temperatures in the few hundred celsius range.

In all moderated reactors, some neutrons of all energy levels will produce fission, including fast neutrons. Some reactors are more fully thermalised than others; for example, in a CANDU reactor nearly all fission reactions are produced by thermal neutrons, while in a pressurized water reactor (PWR) a considerable portion of the fissions are produced by higher-energy neutrons. In the proposed water-cooled supercritical water reactor (SCWR), the proportion of fast fissions may exceed 50%, making it technically a fast neutron reactor.

A fast reactor uses no moderator, but relies on fission produced by unmoderated fast neutrons to sustain the chain reaction. In some fast reactor designs, up to 20% of fissions can come from direct fast neutron fission of uranium-238, an isotope which is not fissile at all with thermal neutrons.

Moderators are also used in non-reactor neutron sources, such as plutonium-beryllium and spallation sources.

Form and location

The form and location of the moderator can greatly influence the cost and safety of a reactor. Classically, moderators were precision-machined blocks of high purity graphite with embedded ducting to carry away heat. They were in the hottest part of the reactor, and therefore subject to corrosion and ablation. In some materials, including graphite, the impact of the neutrons with the moderator can cause the moderator to accumulate dangerous amounts of Wigner energy. At Windscale, this problem led to the infamous Windscale fire.

Some pebble-bed reactors' moderators are not only simple, but also inexpensive[citation needed]: the nuclear fuel is embedded in spheres of reactor-grade pyrolytic carbon, roughly of the size of tennis balls. The spaces between the balls serve as ducting. The reactor is operated above the Wigner annealing temperature so that the graphite does not accumulate dangerous amounts of Wigner energy.

In CANDU and PWR reactors, the moderator is liquid water (heavy water for CANDU, light water for PWR). In the event of a loss-of-coolant accident in a PWR, the moderator is also lost and the reaction will stop. This negative void coefficient is an important safety feature of these reactors. In CANDU the moderator is located in a separate heavy-water circuit, surrounding the pressurized heavy-water coolant channels. This design gives CANDU reactors a positive void coefficient, although the slower neutron kinetics of heavy-water moderated systems compensates for this, leading to comparable safety with PWRs."[5]

Moderator impurities

Good moderators are also free of neutron-absorbing impurities such as boron. In commercial nuclear power plants the moderator typically contains dissolved boron. The boron concentration of the reactor coolant can be changed by the operators by adding boric acid or by diluting with water to manipulate reactor power. The German World War II nuclear program suffered a substantial setback when its inexpensive graphite moderators failed to work. At that time, most graphites were deposited on boron electrodes, and the German commercial graphite contained too much boron. Since the war-time German program never discovered this problem, they were forced to use far more expensive heavy water moderators. In the U.S., Leó Szilárd, a former chemical engineer, discovered the problem.

Non-graphite moderators

Some moderators are quite expensive, for example beryllium, and reactor-grade heavy water. Reactor-grade heavy water must be 99.75% pure to enable reactions with unenriched uranium. This is difficult to prepare because heavy water and regular water form the same chemical bonds in almost the same ways, at only slightly different speeds.

The much cheaper light water moderator (essentially very pure regular water ) absorbs too many neutrons to be used with unenriched natural uranium, and therefore uranium enrichment or nuclear reprocessing becomes necessary to operate such reactors, increasing overall costs. Both enrichment and reprocessing are expensive and technologically challenging processes, and additionally both enrichment and several types of reprocessing can be used to create weapons-usable material, causing proliferation concerns. Reprocessing schemes that are more resistant to proliferation are currently under development.

The CANDU reactor's moderator doubles as a safety feature. A large tank of low-temperature, low-pressure heavy water moderates the neutrons and also acts as a heat sink in extreme loss-of-coolant accident conditions. It is separated from the fuel rods that actually generate the heat. Heavy water is very effective at slowing down (moderating) neutrons, giving CANDU reactors their important and defining characteristic of high "neutron economy."

Nuclear weapon design

Early speculation about nuclear weapons assumed that an "atom bomb" would be a large amount of fissile material, moderated by a neutron moderator, similar in structure to a nuclear reactor or "pile."[6] Only the Manhattan project embraced the idea of a chain reaction of fast neutrons in pure metallic uranium or plutonium. Other moderated designs were also considered by the Americans; proposals included using uranium hydride as the fissile material.[7][8] In 1943 Robert Oppenheimer and Niels Bohr considered the possibility of using a "pile" as a weapon.[9] The motivation was that with a graphite moderator it would be possible to achieve the chain reaction without the use of any isotope separation. In August 1945, when information of the atomic bombing of Hiroshima was relayed to the scientists of the German nuclear program, interned at Farm Hall in England, chief scientist Werner Heisenberg hypothesized that the device must have been "something like a nuclear reactor, with the neutrons slowed by many collisions with a moderator."[10]

After the success of the Manhattan project, all major nuclear weapons programs have relied on fast neutrons in their weapons designs. The notable exception is the Ruth and Ray test explosions of Operation Upshot-Knothole. The aim of the University of California Radiation Laboratory design was to produce an explosion powerful enough to ignite a thermonuclear weapon with the minimal amount of fissile material. The core consisted of uranium hydride, with hydrogen, or in the case of Ray, deuterium acting as the neutron moderator. The predicted yield was 1.5 to 3 kt for Ruth and 0.5-1 kt for Ray. The tests produced yields of 200 tons of TNT each; both tests were considered to be fizzles.[7][8]

The main benefit of using a moderator in a nuclear explosive is that the amount of fissile material needed to reach criticality may be greatly reduced. Slowing of fast neutrons will increase the cross section for neutron absorption, reducing the critical mass. A side effect is however that as the chain reaction progresses, the moderator will be heated, thus losing its ability to cool the neutrons.

Another effect of moderation is that the time between subsequent neutron generations is increased, slowing down the reaction. This makes the containment of the explosion a problem; the inertia that is used to confine implosion type bombs will not be able to confine the reaction. The end result may be a fizzle instead of a bang.

The explosive power of a fully moderated explosion is thus limited, at worst it may be equal to a chemical explosive of similar mass. Again quoting Heisenberg: "One can never make an explosive with slow neutrons, not even with the heavy water machine, as then the neutrons only go with thermal speed, with the result that the reaction is so slow that the thing explodes sooner, before the reaction is complete."

While a nuclear bomb working on thermal neutrons may be impractical, modern weapons designs may still benefit from some level of moderation. A beryllium tamper used as a neutron reflector will also act as a moderator.[11][12]

Materials used

Other light-nuclei materials are unsuitable for various reasons. Helium is a gas and it requires special design to achieve sufficient density; lithium-6 and boron-10 absorb neutrons.

References

Notes

  1. ^ Miller, Jr., George Tyler (2002). Living in the Environment: Principles, Connections, and Solutions (12th Edition). Belmont: The Thomson Corporation. pp. 345. ISBN 0-534-37697-5. 
  2. ^ a b c Stacey., Weston M (2007). Nuclear reactor physics. Wiley-VCH. pp. 29–31. ISBN 3527406794. http://books.google.com/books?id=iolyNyJYEaYC. 
  3. ^ a b c Dobrzynski, L.; K. Blinowski (1994). Neutrons and Solid State Physics. Ellis Horwood Limited. ISBN 0-13-617192-3. 
  4. ^ Neutron scattering lengths and cross sections V.F. Sears, Neutron News 3, No. 3, 26-37 (1992)
  5. ^ D.A. Meneley and A.P. Muzumdar, "Power Reactor Safety Comparison - a Limited Review", Proceedings of the CNS Annual Conference, June 2009
  6. ^ Nuclear Weapons Frequently Asked Questions - 8.2.1 Early Research on Fusion Weapons
  7. ^ a b Operation Upshot-Knothole
  8. ^ a b W48 - globalsecurity.org
  9. ^ Atomic Bomb Chronology: 1942-1944
  10. ^ Hans Bethe in Physics Today Vol 53 (2001) [1]
  11. ^ Nuclear Weapons Frequently Asked Questions - 4.1.7.3.2 Reflectors
  12. ^ N Moderation

See also


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • neutron moderator — neutronų lėtiklis statusas T sritis Energetika apibrėžtis Medžiaga, naudojama neutronų energijai branduoliniuose reaktoriuose mažinti. atitikmenys: angl. neutron moderator vok. Bremssubstanz, f; Moderator, m; Neutronenmoderator, m rus.… …   Aiškinamasis šiluminės ir branduolinės technikos terminų žodynas

  • Neutron radiation — is a kind of ionizing radiation which consists of free neutrons. A result of nuclear fission or nuclear fusion, it consists of the release of free neutrons from atoms, and these free neutrons react with nuclei of other atoms to form new isotopes …   Wikipedia

  • Neutron generator — Neutron generators are neutron source devices which contain compact linear accelerators and that produce neutrons by fusing isotopes of hydrogen together. The fusion reactions take place in these devices by accelerating either deuterium, tritium …   Wikipedia

  • Moderator — often refers to the chairman of a meeting. Specifically, it may refer to: Contents 1 Government 2 Internet 3 Religion 4 Other uses …   Wikipedia

  • Neutron — This article is about the subatomic particle. For other uses, see Neutron (disambiguation). Neutron The quark structure of the neutron. (The color assignment of individual quarks is not important, only that all three colors are present.)… …   Wikipedia

  • Neutron temperature — A chart displaying the speed probability density functions of the speeds of a few noble gases at a temperature of 298.15 K (25 C). An explanation of the y axis label appears on the image page (click to see). Similar speed distributions are… …   Wikipedia

  • Neutron cross section — Science with Neutrons Foundations Neutron temperature Flux · Radiation  …   Wikipedia

  • Neutron scattering — Science with Neutrons Foundations Neutron temperature Flux · Radiation  …   Wikipedia

  • Neutron source — Science with Neutrons Foundations Neutron temperature Flux · Radiation  …   Wikipedia

  • Neutron diffraction — Science with Neutrons Foundations Neutron temperature Flux · Radiation  …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”