- Fluid mechanics
Fluid mechanics is the study of fluids and the forces on them. (Fluids include liquids, gases, and plasmas.) Fluid mechanics can be divided into fluid statics, the study of fluids at rest; fluid kinematics, the study of fluids in motion; and fluid dynamics, the study of the effect of forces on fluid motion. It is a branch of continuum mechanics, a subject which models matter without using the information that it is made out of atoms, that is, it models matter from a macroscopic viewpoint rather than from a microscopic viewpoint. Fluid mechanics, especially fluid dynamics, is an active field of research with many unsolved or partly solved problems. Fluid mechanics can be mathematically complex. Sometimes it can best be solved by numerical methods, typically using computers. A modern discipline, called computational fluid dynamics (CFD), is devoted to this approach to solving fluid mechanics problems. Also taking advantage of the highly visual nature of fluid flow is particle image velocimetry, an experimental method for visualizing and analyzing fluid flow.
The study of fluid mechanics goes back at least to the days of ancient Greece, when Archimedes investigated fluid statics and buoyancy and formulated his famous law known now as the Archimedes' Principle. Rapid advancement in fluid mechanics began with Leonardo da Vinci (observation and experiment), Evangelista Torricelli (barometer), Isaac Newton (viscosity) and Blaise Pascal (hydrostatics), and was continued by Daniel Bernoulli with the introduction of mathematical fluid dynamics in Hydrodynamica (1738). Inviscid flow was further analyzed by various mathematicians (Leonhard Euler, d'Alembert, Lagrange, Laplace, Poisson) and viscous flow was explored by a multitude of engineers including Poiseuille and Gotthilf Heinrich Ludwig Hagen. Further mathematical justification was provided by Claude-Louis Navier and George Gabriel Stokes in the Navier–Stokes equations, and boundary layers were investigated (Ludwig Prandtl, Theodore von Kármán), while various scientists (Osborne Reynolds, Andrey Kolmogorov, Geoffrey Ingram Taylor) advanced the understanding of fluid viscosity and turbulence.
Relationship to continuum mechanics
Fluid mechanics is a subdiscipline of continuum mechanics, as illustrated in the following table.
The study of the physics of continuous materials
The study of the physics of continuous materials with a defined rest shape.
Describes materials that return to their rest shape after an applied stress.
Describes materials that permanently deform after a sufficient applied stress.
The study of materials with both solid and fluid characteristics.
The study of the physics of continuous materials which take the shape of their container.
Non-Newtonian fluids Newtonian fluids
In a mechanical view, a fluid is a substance that does not support shear stress; that is why a fluid at rest has the shape of its containing vessel. A fluid at rest has no shear stress.
Like any mathematical model of the real world, fluid mechanics makes some basic assumptions about the materials being studied. These assumptions are turned into equations that must be satisfied if the assumptions are to be held true. For example, consider an incompressible fluid in three dimensions. The assumption that mass is conserved means that for any fixed closed surface (such as a sphere) the rate of mass passing from outside to inside the surface must be the same as rate of mass passing the other way. (Alternatively, the mass inside remains constant, as does the mass outside). This can be turned into an integral equation over the surface.
Fluid mechanics assumes that every fluid obeys the following:
- Conservation of mass
- Conservation of energy
- Conservation of momentum
- The continuum hypothesis, detailed below.
Further, it is often useful (at subsonic conditions) to assume a fluid is incompressible – that is, the density of the fluid does not change.
Similarly, it can sometimes be assumed that the viscosity of the fluid is zero (the fluid is inviscid). Gases can often be assumed to be inviscid. If a fluid is viscous, and its flow contained in some way (e.g. in a pipe), then the flow at the boundary must have zero velocity. For a viscous fluid, if the boundary is not porous, the shear forces between the fluid and the boundary results also in a zero velocity for the fluid at the boundary. This is called the no-slip condition. For a porous media otherwise, in the frontier of the containing vessel, the slip condition is not zero velocity, and the fluid has a discontinuous velocity field between the free fluid and the fluid in the porous media (this is related to the Beavers and Joseph condition).
The continuum hypothesis
Fluids are composed of molecules that collide with one another and solid objects. The continuum assumption, however, considers fluids to be continuous. That is, properties such as density, pressure, temperature, and velocity are taken to be well-defined at "infinitely" small points, defining a REV (Reference Element of Volume), at the geometric order of the distance between two adjacent molecules of fluid. Properties are assumed to vary continuously from one point to another, and are averaged values in the REV. The fact that the fluid is made up of discrete molecules is ignored.
The continuum hypothesis is basically an approximation, in the same way planets are approximated by point particles when dealing with celestial mechanics, and therefore results in approximate solutions. Consequently, assumption of the continuum hypothesis can lead to results which are not of desired accuracy. That said, under the right circumstances, the continuum hypothesis produces extremely accurate results.
Those problems for which the continuum hypothesis does not allow solutions of desired accuracy are solved using statistical mechanics. To determine whether or not to use conventional fluid dynamics or statistical mechanics, the Knudsen number is evaluated for the problem. The Knudsen number is defined as the ratio of the molecular mean free path length to a certain representative physical length scale. This length scale could be, for example, the radius of a body in a fluid. (More simply, the Knudsen number is how many times its own diameter a particle will travel on average before hitting another particle). Problems with Knudsen numbers at or above unity are best evaluated using statistical mechanics for reliable solutions.
The Navier–Stokes equations (named after Claude-Louis Navier and George Gabriel Stokes) are the set of equations that describe the motion of fluid substances such as liquids and gases. These equations state that changes in momentum (force) of fluid particles depend only on the external pressure and internal viscous forces (similar to friction) acting on the fluid. Thus, the Navier–Stokes equations describe the balance of forces acting at any given region of the fluid.
The Navier–Stokes equations are differential equations which describe the motion of a fluid. Such equations establish relations among the rates of change of the variables of interest. For example, the Navier–Stokes equations for an ideal fluid with zero viscosity states that acceleration (the rate of change of velocity) is proportional to the derivative of internal pressure.
This means that solutions of the Navier–Stokes equations for a given physical problem must be sought with the help of calculus. In practical terms only the simplest cases can be solved exactly in this way. These cases generally involve non-turbulent, steady flow (flow does not change with time) in which the Reynolds number is small.
For more complex situations, such as global weather systems like El Niño or lift in a wing, solutions of the Navier–Stokes equations can currently only be found with the help of computers. This is a field of sciences by its own called computational fluid dynamics.
General form of the equation
The general form of the Navier–Stokes equations for the conservation of momentum is:
- is the fluid density,
- is the substantive derivative (also called the material derivative),
- is the velocity vector,
- is the body force vector, and
- is a tensor that represents the surface forces applied on a fluid particle (the stress tensor).
Unless the fluid is made up of spinning degrees of freedom like vortices, is a symmetric tensor. In general, (in three dimensions) has the form:
- are normal stresses,
- are tangential stresses (shear stresses).
The above is actually a set of three equations, one per dimension. By themselves, these aren't sufficient to produce a solution. However, adding conservation of mass and appropriate boundary conditions to the system of equations produces a solvable set of equations.
Newtonian versus non-Newtonian fluids
A Newtonian fluid (named after Isaac Newton) is defined to be a fluid whose shear stress is linearly proportional to the velocity gradient in the direction perpendicular to the plane of shear. This definition means regardless of the forces acting on a fluid, it continues to flow. For example, water is a Newtonian fluid, because it continues to display fluid properties no matter how much it is stirred or mixed. A slightly less rigorous definition is that the drag of a small object being moved slowly through the fluid is proportional to the force applied to the object. (Compare friction). Important fluids, like water as well as most gases, behave — to good approximation — as a Newtonian fluid under normal conditions on Earth.
By contrast, stirring a non-Newtonian fluid can leave a "hole" behind. This will gradually fill up over time – this behaviour is seen in materials such as pudding, oobleck, or sand (although sand isn't strictly a fluid). Alternatively, stirring a non-Newtonian fluid can cause the viscosity to decrease, so the fluid appears "thinner" (this is seen in non-drip paints). There are many types of non-Newtonian fluids, as they are defined to be something that fails to obey a particular property — for example, most fluids with long molecular chains can react in a non-Newtonian manner.
Equations for a Newtonian fluid
The constant of proportionality between the shear stress and the velocity gradient is known as the viscosity. A simple equation to describe Newtonian fluid behaviour is
- τ is the shear stress exerted by the fluid ("drag")
- μ is the fluid viscosity – a constant of proportionality
- is the velocity gradient perpendicular to the direction of shear.
For a Newtonian fluid, the viscosity, by definition, depends only on temperature and pressure, not on the forces acting upon it. If the fluid is incompressible and viscosity is constant across the fluid, the equation governing the shear stress (in Cartesian coordinates) is
- τij is the shear stress on the ith face of a fluid element in the jth direction
- vi is the velocity in the ith direction
- xj is the jth direction coordinate.
If a fluid does not obey this relation, it is termed a non-Newtonian fluid, of which there are several types.
Among fluids, two rough broad divisions can be made: ideal and non-ideal fluids. An ideal fluid really does not exist, but in some calculations, the assumption is justifiable. An Ideal fluid is non viscous- offers no resistance whatsoever to a shearing force.
One can group real fluids into Newtonian and non-Newtonian. Newtonian fluids agree with Newton's law of viscosity. Non-Newtonian fluids can be either plastic, bingham plastic, pseudoplastic, dilatant, thixotropic, rheopectic, viscoelatic.
- Batchelor, George K. (1967), An Introduction to Fluid Dynamics, Cambridge University Press, ISBN 0521663962
- Falkovich, Gregory (2011), Fluid Mechanics (A short course for physicists), Cambridge University Press, ISBN 978-1-107-00575-4
- Kundu, Pijush K.; Cohen, Ira M. (2008), Fluid Mechanics (4th revised ed.), Academic Press, ISBN 978-0-123-73735-9
- Currie, I. G. (1974), Fundamental Mechanics of Fluids, McGraw-Hill, Inc., ISBN 0070150001
- Massey, B.; Ward-Smith, J. (2005), Mechanics of Fluids (8th ed.), Taylor & Francis, ISBN 978-0-415-36206-1
- White, Frank M. (2003), Fluid Mechanics, McGraw–Hill, ISBN 0072402172
- Free Fluid Mechanics books
- Fluid Mechanics webpage by Falkovich
- Annual Review of Fluid Mechanics
- CFDWiki – the Computational Fluid Dynamics reference wiki.
- Educational Particle Image Velocimetry – resources and demonstrations
- prof. DSc Ivan Antonov, Technical University of Sofia, Bulgaria.
Branches of physicsAcoustics • Agrophysics (Soil physics) • Astrophysics • Atmospheric physics • Atomic, molecular, and optical physics • Biophysics (Medical physics · Neurophysics) • Chemical physics • Condensed matter physics • Econophysics • Electromagnetism • Geophysics • Mechanics (Classical mechanics · Continuum mechanics · Quantum mechanics · Fluid mechanics · Thermodynamics · Biomechanics) • Nuclear physics • Optics • Particle physics • Quantum field theory • Relativity (Special relativity · General relativity) Concepts Unit operations Unit process Branches Others Category · Portal:Engineering
Wikimedia Foundation. 2010.
Look at other dictionaries:
fluid mechanics — n. the study of the pressures, velocities, etc. of liquids and gases when they are in motion or at rest … English World dictionary
fluid mechanics — an applied science dealing with the basic principles of gaseous and liquid matter. Cf. fluid dynamics. [1940 45] * * * Study of the effects of forces and energy on liquids and gases. One branch of the field, hydrostatics, deals with fluids at… … Universalium
fluid mechanics — hidroaeromechanika statusas T sritis Standartizacija ir metrologija apibrėžtis Mokslas, tiriantis skysčių arba dujų pusiausvyrą, judėjimą, jų ir kietojo kūno sąveiką. atitikmenys: angl. fluid mechanics vok. Strömungsmechanik, f rus.… … Penkiakalbis aiškinamasis metrologijos terminų žodynas
fluid mechanics — hidroaeromechanika statusas T sritis chemija apibrėžtis Mokslas, tiriantis skysčių (dujų) pusiausvyrą, judėjimą, skysčio (dujų) ir kietojo kūno sąveiką. atitikmenys: angl. fluid mechanics rus. гидроаэромеханика … Chemijos terminų aiškinamasis žodynas
fluid mechanics — skysčių ir dujų mechanika statusas T sritis fizika atitikmenys: angl. fluid mechanics vok. Mechanik der Flüssigkeiten und Gase, f; Strömungsmechanik, f rus. механика жидкостей и газов, f pranc. mécanique des fluides, f … Fizikos terminų žodynas
fluid mechanics — noun study of the mechanics of fluids • Syn: ↑hydraulics • Derivationally related forms: ↑hydraulic (for: ↑hydraulics) • Hypernyms: ↑mechanics … Useful english dictionary
fluid mechanics — noun plural but singular or plural in construction Date: 1937 a branch of mechanics dealing with the properties of liquids and gases … New Collegiate Dictionary
fluid mechanics — noun The branch of mechanics dealing with gases and liquids, either at rest or in motion … Wiktionary
fluid mechanics — applied science embodying the basic principles of gaseous and liquid flow … English contemporary dictionary
fluid mechanics — plural noun [treated as sing.] the study of forces and flow within fluids … English new terms dictionary