Aqueous two phase system


Aqueous two phase system

Aqueous biphasic systems (ABS) or aqueous two phase systems are clean alternatives for traditional organic-water solvent extraction systems.

ABS are formed when 2 polymers, one polymer and one kosmotropic salt, or two salts (one chaotropic salt and the other a kosmotropic salt) are mixed together at appropriate concentrations or at a particular temperature. The two phases are mostly composed of water and non volatile components, thus eliminating volatile organic compounds. They have been used for many years in biotechnological applications as denaturing and benign separation media. Recently, they have been used for metal ion separations, environmental remediation, metallurgical applications and as a reaction media.

Introduction

In 1896, Beijerinck first noted an 'incompatibility' in solutions of agar, a water-soluble polymer, with soluble starch or gelatine. Upon mixing, they separated into two immiscible phases.Subsequent investigation has led to the determination of many other aqueous biphasic systems, of which the polyethylene glycol (PEG) - dextran system is the most extensively studied. Other systems that form aqueous biphases are: PEG - sodium carbonate or PEG and phosphates, citrates or sulfates. Aqueous biphasic systems are used during downstream processing mainly in biotechnological and chemical industries.

The two phases

It is a common observation that when oil and water are poured into the same container, they separate into two phases or layers, because they are immiscible. In general, aqueous (or water-based) solutions, being polar, are immiscible with non-polar organic solvents (chloroform, toluene, hexane etc) and form a two-phase system. However, in an ABS, both immiscible components are water-based.

The formation of the distinct phases is affected by the pH, temperature and ionic strength of the two components, and separation occurs when the amount of a polymer present exceeds a certain limiting concentration (which is determined by the above factors).

PEG–dextran system

The "upper phase" is formed by the more hydrophobic polyethylene glycol (PEG), which is of lower density than the "lower phase," consisting of the more hydrophilic and denser dextran solution.

Although PEG is inherently denser than water, it occupies the upper layer. This is believed to be due to its solvent 'ordering' properties, which excludes excess water, creating a low density water environment. [http://www.lsbu.ac.uk/water/biphasic.html] The degree of polymerisation of PEG also affects the phase separation and the partitioning of molecules during extraction.

Advantages

ABS is an excellent method to employ for the extraction of proteins/enzymes and other labile biomolecules from crude cell extracts or other mixtures. Most often, this technique is employed in enzyme technology during industrial or laboratory production of enzymes.

*They provide mild conditions that do not harm or denature unstable/labile biomolecules
*The interfacial stress (at the interface between the two layers) is far lower (400-fold less) than water-organic solvent systems used for solvent extraction, causing less damage to the molecule to be extracted
*The polymer layer stabilizes the extracted protein molecules, favouring a higher concentration of the desired protein in one of the layers, resulting in an effective extraction
*Specialised systems may be developed (by varying factors such as temperature, degree of polymerisation, presence of certain ions etc ) to favour the enrichment of a specific compound, or class of compounds, into one of the two phases. They are sometimes used simultaneously with ion-exchange resins for better extraction
*Separation of the phases and the partitioning of the compounds occurs rapidly. This allows the extraction of the desired molecule before endogenous proteases can degrade them.
*These systems are amenable to scale-ups, from laboratory-sized setups to those that can handle the requirements of industrial production. They may be employed in continuous protein-extraction proceses.

Specificity may be further increased by tagging ligands specific to the desired enzyme, onto the polymer. This results in a preferential binding of the enzyme to the polymer, increasing the effectiveness of the extraction.

One major disadvantage, however, is the cost of materials involved, namely high-purity dextrans employed for the purpose. However, other low-cost alternatives such as less refined Dextrans, hydroxypropyl starch derivatives and high-salt solutions.

External links

* [http://www.lsbu.ac.uk/biology/enztech/biphasic1.html London South Bank University on ABS]


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Aqueous two-phase system — Aqueous biphasic systems (ABS) or aqueous two phase systems (ATPS) are clean alternatives for traditional organic water solvent extraction systems. ABS are formed when 2 polymers, one polymer and one kosmotropic salt, or two salts (one chaotropic …   Wikipedia

  • Phase (matter) — In the physical sciences, a phase is a region of space (a thermodynamic system), throughout which all physical properties of a material are essentially uniform.[1] Examples of physical properties include density, index of refraction, and chemical …   Wikipedia

  • Phase Boundary Catalysis — (PBC) in chemistry is a type of heterogeneous catalytic system which facilitates the chemical reaction of a particular chemical component in immiscible phase react on a catalytic active site located at phase boundary. The chemical component is… …   Wikipedia

  • Phase — (f[=a]z), n.; pl. {Phases} (f[=a]z [e^]z). [NL. phasis, Gr. ?, fr. ? to make to appear: cf. F. phase. See {Phenomenon}, {Phantom}, and {Emphasis}.] 1. That which is exhibited to the eye; the appearance which anything manifests, especially any one …   The Collaborative International Dictionary of English

  • phase — 1. A stage in the course of change or development. 2. A homogeneous, physically distinct, and separable portion of a heterogeneous system; e.g., oil, gum, and water are three phases of an emulsion. 3. The time relat …   Medical dictionary

  • Sublimation (phase transition) — Dark green crystals of nickelocene, freshly sublimed on a cold finger …   Wikipedia

  • Non-random two-liquid model — VLE of the mixture of Chloroform and Methanol plus NRTL fit and extrapolation to different pressures The non random two liquid model[ …   Wikipedia

  • Complement system — This article is about an aspect of the immune system. For other uses, see complement (disambiguation). The complement system helps or “complements” the ability of antibodies and phagocytic cells to clear pathogens from an organism. It is part of… …   Wikipedia

  • Third phase — is the term for a stable emulsion which forms in a solvent extraction system when the original two phases (aqueous and organic) are mixed.The third phase can be caused by a detergent (surfactant) or a fine solid. While third phase is a term for… …   Wikipedia

  • Chromatography — Pictured is a sophisticated gas chromatography system. This instrument records concentrations of acrylonitrile in the air at various points throughout the chemical laboratory. Chromatography (from Greek χρῶμα chroma color and γράφειν graphein to… …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.