Low-energy vehicle

Low-energy vehicle

A Low-energy vehicle is any type of vehicle that uses "less energy" than a regular petroleum fuel vehicle. Higher efficiency can be achieved by changing the vehicle's design, and/or by modifying its powertrain. Energy consumption as low as 5-12.5 kWh/100km (180-450 kJ/km) is achieved directly by battery electric microcars. When comparing the efficiency of electric cars with IC cars the efficiency of the power generation has to be considered, for example the distribution efficiency for Europe is about 40%, [http://themes.eea.europa.eu/Sectors_and_activities/energy/indicators/EN19%2C2007.04/fig1a.gif/view European power generation efficiency 2004 ] so the overall energy consumption of electric cars lies in the range 0.45 to 1.1 MJ/km. (Average energy efficiency of US plants 33% US DOE (ref to follow) US grid transmission loss 9.5%, UK grid transmission loss 7.4 (ref wikipedia national grid entry) - transmission losses not included in electric car efficiency figure.) By the year 2050, consumption levels of 1.6 l/100 km (0.64 MJ/km) in diesel-fuelled cars and 2 l/100 km (0.7 MJ/km) in petrol-fuelled cars are deemed feasible. [SRU German Advisory Council for the Environment, Reducing CO2 Emissions from Cars http://www.lowcvp.org.uk/assets/reports/Reducing_CO2_Emissions%20Aug%2005.pdf p.5 feasible targets for fuel consumption] The energy consumption figures for petrol and diesel cars also need to be increased by 18% [http://www.calcars.org/calcars-technical-notes.pdf slide 2 85% well to tank efficiency] to represent the oil used in processing and distributing oil-based fuel, to 0.75 MJ/km for diesel, and 0.82 MJ/km for petrol.

To put these consumption figures into perspective a consumption of 1000 km/litre (2350 mpg US) is 0.0344 Mj/km, excluding distribution energy. At 20 km/hr it would take 50 hours to travel 1000 km, so with a 20% efficient internal combustion engine it would need to attain and keep this speed using just 38.2 watts.

Motivation

Reducing global energy demand might help to reduce access conflicts over oil reserves and/or environmental damage when trying to produce fuel from natural or other fossil sources. Existing published consumption figures tend to underestimate the consumption seen in practice by 20 to 30%. [ Real-world emissions as well as the fuel consumption under the MCC (Milan City Cycle) were much higher - almost double - those obtained under the European type approval test cycle, Ref: JRC>IES>>13202] [http://www.edmunds.com/advice/fueleconomy/articles/105503/article.html On-line ref for differences between EPA and actual fuel consumption] The reason is partly that the official fuel consumption tests are not sufficiently representative of real world usage. Auto makers optimise their fuel consumption strategies in order to reduce the apparent cost of ownership of the cars, and to improve their green image. Even one of the most fuel efficient two seater on the market - the Smart MHD consumes two or three times more energy per km than a cabin based ultralight two seater would - proven by the 1l prototype by VW. Pilot vehicles have proven that a feasible target may lie in the range of 1-2 l/100km, or lower, or 10 kWh/100 km electricity. Available electric LEVs already use substantially less energy than available cars, e.g. 4–8 kW·h/100 km for the Twike, [ [http://www.twike.ch TWIKE ] ] . Here the challenges are increasing range and lifetime of batteries, crash worthiness, passenger comfort, performance and reducing the price (which is currently about twice that of a cheap conventional four seater).

Energy Efficiency in MJ per km or kWh per 100km:It is more straightforward to express energy efficiency in MJ (Mega-Joule) per km because terms like MPG (Miles Per Gallon) and litres per 100 km do not take into account what type of fuel is used and thus the numbers will be distorted for different fuel types. Diesel contains 38.7MJ per litre, Gasoline 34.6MJ per litre and Bio-Diesel 30.5MJ per litre, whereas LPG contains only 22.2MJ per liter which is why the number of litres consumed go up drastically when converting a gasoline car to LPG. This does not mean that the energy consumption goes up; it only means that there is less energy in a litre of LPG. Ethanol also contains much less energy per litre than gasoline. To compare electricity and gasoline its easier to use kWh/100km since 1l gasoline holds around 10kWh.

Physical background

Energy demand may be kept low by:
* lower parasitic masses (compared to the average load) causing low energy demand in transitional operation (stop and go operation in the cities) {P_{accel}= m_{vehicle} cdot a cdot v } where "P" stands for power, m_{vehicle} for the total vehicle mass, "a" for the vehicles acceleration and "v" for the vehicles velocity. Extreme masses will go down to 300 kg from today's 1100 kg to 1600 kg. Five seaters of the sixties had 625 kg. [ [http://www.homepages.hetnet.nl/~meinsma/english.htm english ] ] Japanese sub-compact cars have 500-600 kg. Further mass reduction is possible by adapting the maximum number of passengers to the average occupancy rate and having removable seats. Two-seater microcars have less than 400 kg, single-seaters less than 300 kg. Further reductions are possible with very light construction, e.g. Twike. The crash protection is certainly a problem in current traffic conditions, but the low energy vehicles are driven mainly at low velocities in cities.

* low cross-sectional area and mirrors replaced by cameras causing very low drag losses especially when driven at higher speed {F_{drag}= A_{cross} cdot C_d cdot frac {v_{air}^2 ho_{air {2} } where F stands for the force, {A_{cross for the cross-sectional area of the vehicle, { ho_{air for the density of the air and {v_{air for the relative velocity of the air (incl. wind). Two seating places in a tandem (back to back or forward facing in line) arrangement drastically reduce the cross-sectional area down to 1 m². The drag coefficient "Cd" of the vehicle may be as low as 0.15 for very good vehicles.
* low rolling resistance due to smaller and high pressure tires with optimised tread and low vehicle mass driving the rolling resistance {F_{roll}= mu_{roll} cdot m_{vehicle}cdot g } where {mu_{roll stands for the rolling resistance coefficient, "g" for acceleration due to gravity and {m_{vehicle for the vehicle mass. Advanced driver assistance and ABS could prevent safety problems caused by the small tires, but current light weight vehicles do not possess these systems. Values of {mu_{roll down to 0.0025 [Roche, Schinkel, Storey, Humphris & Guelden, "Speed of Light." ISBN 0 7334 1527 X p176 Michelin measured rolling resistance] are possible but are more usually 0.005 to 0.008 for cycle-type tires and 0.010 to 0.015 for car tires.

Technological support for low energy operation may also come from driver assistance systems since driving style can be adapted to achieve lower energy consumption. Energy management becomes possible with hybrid vehicles with the possibility to recuperate braking energy and to operate the internal combustion engine (ICE) at higher efficiency on average. Hybrid power trains may also reduce the ICE-engine size thus increasing the average load factor and minimising the part load losses. Purely electric vehicles use up to 10 x less energy (0,3 to 0,5MJ/km) than those with combustion engines (3 to 5MJ/km and up to 10MJ/km for SUVs) because of the much higher motor and battery efficiencies. Maximum ranges are improving with new LiIon electrochemical storage batteries. It is not likely that purely IC powered vehicles will match the energy efficiency of EVs ignoring the efficiency of power generation, especially in transient operation. Hybrid electric vehicles use smaller engines, that work harder, to increase the average efficiency of the engine. Even so it is unlikely that their overall direct efficiency will match that of EVs. Once real world electrical power generating efficiency and well-to-bowser oil efficiency is taken into consideration than all three types offer surprisingly similar overall energy consumptions.

ize and performance of various vehicles

Average data for vehicle types sold in the U.S.A. [ [http://www.theautochannel.com/ Auto Channel, 2008 New Cars, 2008 New Car Buyers Guides, 2008 New Car Pictures, 2008 New Car Videos, 2008 New Car Reviews, 2008 New Car Pricing, 2008 New Car Buyers Guide, 2008- 1993 Car reviews, Hybrids, Compare Cars, The Car Channel, Compare New Cars, 2008 Toyota Camry Hybrid, 2007 Honda; 2007 Honda Accord; 2007 Honda Civic; 2007 Hybrids; 2007 New Car Pricing, 2007 Car Reviews, 2007 Car Specifications, 2007 Car Fuel Info, 2007 Car Comparisons, Used Car Prices, 2006 Car Reviews, Automotive News, Automotive, Total Ownership Costs (TOC), Pennysaver Autos; Used Vehicle Classifieds, Auto Industry News, Everything for the auto enthusiastic, and more on The Auto Channel ] ] compared to an advanced vehicle concept, the Honda Insight:The drag resistance for an SUV, compared with a family sedan with the same drag coefficient, is approximately 30% higher, and its increased mass means that the acceleration forces has to be 35% bigger for a given acceleration. This gives a 40% increase in fuel consumption. The last column in the table demonstrates that with the exception of the Prius and the pick-ups all the alternatives have roughly the same potential fuel usage per passenger IF they were fully occupied. However the fuel usage per passenger really depends on the occupancy rate of each type. In 2000 the occupancy rate was only 1.6 in practice, decreasing each year, averaged across all vehicle types and journey types, [ [http://www.statistics.gov.uk/STATBASE/ssdataset.asp?vlnk=5154 Car occupancy: by trip purpose, 1998-2000: Social Trends 32 ] ] and 1.2 for commuting.

Outlook

In the near future several low energy vehicles may be in production.
* Aptera Motors Typ-1 with three wheels, a claimed Cd of 0.11, and a claimed energy usage of 6 kWh/100km, is due in late 2008.
* Loremo LS (for "low resistance mobile") turbodiesel car, which claims Cd of 0.20 and 157 mpg, is due in 2009.
* VW's 1l car, and the Daihatsu UFE III are examples of working prototypes which may show up in future.

Buying Behaviour

Whilst in many countries fuel efficiency is regulated (USA, Japan, Taiwan, South Korea, China [Petroleum Conservation Research Association (PCRA)New Delhi http://www.energymanagertraining.com/Presentations/3L_Auto/02Pune/02PCRA_Transport.pdf] ) by law, in others there is a non perfect market, where producers tend to avoid prominence of high consumption figures in ads and thus make the procurement decisions less fact based.It is one of the reasons that energy efficient vehicles were not establishing themselves on the market in high volumes. Literature also sees higher child occupancy with SUVs. Reasons for the buying behavior are:
* Low fuel cost
* Sizing on the safe side
* Marketing driven buying
* Misconceptions

Low fuel cost

In some countries fuel cost is very relevant but not the main cost (11,000 km at 8l/100km and 1€/l gives 73€/month only). This is lower than the investment costs per month for younger cars and leads to heavier usage of the vehicle. The technical term is least cost optimisation. If the cost operating the vehicle one km more is small then there is the tendency with the user to choose the car instead of public transport.

izing (Vehicle/Engine) on the safe side

If you are unsure about the final size of your family or the distances you normally drive you want to be on the safe side.Because of the big annuity or leasing rate, people tend to plan in advance and buy bigger cars.People also think that SUVs are safer for their children [SUVs:The High Costs Of Lax Fuel Economy Standards for American Families Public Citizen June 2003 http://www.citizen.org/documents/costs_of_suvs.pdf ] , but see the misconceptions section below for a discussion on this.

Marketing driven buying

There is a certain room free of intelligence and full of emotion and tendency towards luxury. This may be seen in the emotional marketing campaigns of the car brands. To avoid information given to the customer the ads contain only marketing speech bypassing also CO2 labelling requirements this way.

Effect of vehicle size and engine power

Vehicles with a higher number of seats have a better fuel economy if they are fully occupied. But you don't save fuel if you drive an SUV commuting to work alone, equally, you don't save fuel if you all drive separately to the same work in hybrids. The logic leads immediately to the coach or bus public transport because here the average occupancy rate in operation (in % of the seating capacity) is much higher than for the average SUV or Minivan because its a public system. Rideshare experience is very bad because of the reluctance of people to enter someone else's car [...males were significantly less likely to switch to becoming passengers or to car-pooling. from http://www.pinnacleresearch.co.nz/research/vehicle_occupancy.pdf] . It has also to be said that the image build up for minivans has pushed back older vehicle concepts equipping estate vehicles with a third seat row. This way you avoid the high mass and big height of a minivan.Other statements often heard are:

* "A stronger engine consumes less petrol because it works under less stress"
* "Heavier vehicles are safer"

The fuel consumption of an engine is depicted as a 3dimensional map where the consumption is shown against RPM and torque. Normally the smallest consumption is seen in the upper middle part of the diagram. For diesel engines this region is bigger to lower torque and extends to higher RPM. The choice of engine power for a given vehicle should consider the typical application - for non transient low velocity operation this leads to lower power requirements, at the cost of reduced acceleration and top speed. A hybrid electric concept allows an even lower power internal combustion engine, but the added weight pays only off if operating in stop and go conditions frequently or generally at low power, if using a series hybrid electric concept.

In a collision the occupants of a heavy vehicle will, on average, suffer fewer and less serious injuries than the occupants of a lighter vehicle [ [http://www.nhtsa.dot.gov/cars/rules/regrev/evaluate/pdf/809662.pdf Acknowledgements ] ] . An accident in a 2000 lb (900 kg) vehicle will on average cause about 50% more injuries to its occupants than a 3000 lb (1350 kg) vehicle [ [http://www.insure.com/articles/carinsurance/2003-models.html The safest cars of 2003 ] ]

Fleet Management and Low Energy Consumption

The EU- sponsored RECODRIVE project [ [http://www.recodrive.eu website] Rewarding and Recognition Schemes for Energy Conserving Driving, Vehicle procurement and maintenance ] has set up a quality circle to manage low energy consumption in fleets. This starts with energy aware procurement, and includes fuel management, driver information and training and incentives for all staff involved in the fleet management and maintenance process. Vehicle equipped with gear shift indicators, tire pressure monitoring systems and downsized internal combustion engines and for stop'n go operation also hybrid electric power trains will help to save fuel.

ee also

*All-electric vehicle
*Gas-guzzler
*Green vehicle
*Low-carbon economy
*Low-rolling resistance tires
*Plug-in hybrid

References

External links

*http://www.wired.com/cars/futuretransport/magazine/16-01/ff_100mpg "WIRED" article including images of Aptera Motors' vehicle
* [http://autoweb.drive.com.au/cms/newsarticle.html?&start=15&showall=&id=VWN&doc=vwg0006011 VW Lupo driven with 2.5 l/100 km in Australia 94 mpg U.S.]
* [http://www.carpages.co.uk/toyota/toyota_es3_concept_part_1_22_11_02.asp?switched=on&echo=920783828 Toyota ES3 2.7 l/100 km in the FIA ECO-Test 87 mpg]
* [http://www.mitsubishi-motors.com/corporate/about_us/technology/environment/e/i.html Mitsubishi i-concept car tested at 3.8 l/100 km 62 mpg]
* [http://www.fev-now.com Fuel Efficient Vehicles Now] An activist site with much information on what can be done now to do to improve things even more.
* [http://www.recodrive.eu RECODRIVE - EU-Project promoting sustainable fleet management]


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Low emission vehicle — (LEV)   a vehicle certified by the California Air Resources Board to have emissions from zero to 50,000 miles no higher than 0.075 grams/mile (g/mi) of non methane organic gases, 3.4 g/mi of carbon monoxide, and 0.2 g/mi of nitrogen oxides.… …   Energy terms

  • Low-speed vehicle — A low speed vehicle (LSV) is a legal class of 4 wheel vehicles that have a maximum capable speed typically around 25 mph or 40 km/h, and have a minimum capable speed (typically 20 mph or 30 km/h) that allows them to travel on public roads not… …   Wikipedia

  • Super Ultra Low Emission Vehicle — (SULEV) is a conventionally powered or gas electric hybrid vehicle designed to produce minimal air pollution at their point of use, typically 90% less than that of an equivalent ordinary full gasoline vehicle.cope regarding emissionsControlled… …   Wikipedia

  • Low-rolling resistance tires — are tires which are designed to improve fuel efficiency of a car by minimizing the energy wasted as heat as the tire rolls down the road. Approximately 5–15% of the fuel consumed by a typical car may be to overcome to rolling resistance. [… …   Wikipedia

  • Energy conservation — This article is about decreasing energy consumption. For the law of conservation of energy in physics, see Conservation of energy. Sustainable energy …   Wikipedia

  • Energy use and conservation in the United Kingdom — For Government policy, see Energy policy of the United Kingdom Energy use and conservation in the United Kingdom has been receiving increased attention over recent years. Key factors behind this are the UK Government s commitment to reducing… …   Wikipedia

  • Energy policy of the European Union — European Union This article is part of the series: Politics and government of the European Union …   Wikipedia

  • Low Earth orbit — An orbiting cannon ball showing various sub orbital and orbital possibilities …   Wikipedia

  • Energy carrier — An energy carrier is a substance or phenomenon that can be used to produce mechanical work or heat or to operate chemical or physical processes (ISO 13600).It is any system or substance that contains energy for conversion as usable energy later… …   Wikipedia

  • low — I. intransitive verb Etymology: Middle English loowen, from Old English hlōwan; akin to Old High German hluoen to moo, Latin calare to call, summon, Greek kalein Date: before 12th century moo II. noun Date: 1549 the deep sustained sound… …   New Collegiate Dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”