ICL 2900 Series

ICL 2900 Series

The ICL 2900 Series was a range of mainframe computer systems announced by the UK manufacturer ICL on 9 October 1974. The company had started development, under the name New Range immediately on its formation in 1968. It was not designed to be compatible with any previous machines produced by the company, or with any competitor's machines: rather, it was conceived as a "synthetic option" combining the best ideas available from a variety of sources.

In marketing terms, the 2900 Series was superseded by Series 39 in the mid-1980s; however, Series 39 was essentially a new set of machines implementing the 2900 Series architecture, as were subsequent ICL machines branded Trimetra.

Origins

When ICL was formed in 1968 as a result of the merger of
International Computers and Tabulators (ICT) with English Electric Leo Marconi, the companyconsidered a number of options for its future product line. A number of options were studied, including enhancements to either ICT's 1900 Series or the English Electric System 4,and a development based on J. K. Illiffe's Basic Language Machine. The option finally selected was the so called "Synthetic Option": a new design starting with a clean sheet of paper.

As the name implies, the design was influenced from many sources. These included ICL's own earlier machines. The design of Burroughs mainframes was influential, though ICL rejected the concept of optimising the design for one high-level language. The MULTICS system provided other ideas, notably in the area of protection. However, the biggest single outside influence was probably the MU5 machine developed at Manchester University.

Architectural concepts

The Virtual Machine

The 2900 Series architecture uses the concept of a Virtual Machine as the set of resources available to a program. The concept of a "Virtual Machine" in the 2900 Series architecture should not be confused with the way the term is used in other environments. Because each program runs in its own Virtual Machine, the concept may be likened to a "process" in other operating systems, while the 2900 Series process is more like a "thread".

The most obvious resource in a Virtual Machine is the virtual store (memory). Other resources include peripherals, files, network connections, and so on.

Within a virtual machine, code can run at different layers of protection, called access levels (or ACR levels, after the Access Control Register which controls the mechanism). The most privileged levels of operating system code (the kernel) operate in the same virtual machine as the user application, as do intermediate levels such as the subsystems to implement filestore access and networking. System calls thus involve a change of protection level, but not an expensive call to invoke code in a different virtual machine. Every code module executes at a particular access level, and can invoke the functions offered by lower-level code, but cannot make direct access to memory or other resources at that level. The architecture thus offers a built-in encapsulation mechanism to ensure system integrity.

Segments of memory can be shared between virtual machines. There are two kinds of shared memory: public segments used by the operating system (which are present in all virtual machines), and global segments used for application-level shared data: this mechanism is used only when there is an application requirement for two virtual machines to communicate. For example, global memory segments are used for database lock tables. Hardware semaphore instructions are available to synchronise access to such segments. A minor curiosity is that two virtual machines sharing a global segment will use different virtual addresses for the same memory locations, which means that virtual addresses cannot safely be passed from one VM to another.

Addressing mechanisms

The 2900 architecture supports a hardware stack, providing an efficient vehicle for executing high-level language programs, especially those allowing recursive function calls. This was a forward-looking decision at the time, since it was expected that the dominant programming languages would initially be COBOL and FORTRAN. The architecture provides built-in mechanisms for making procedure calls using the stack, and special purpose registers for addressing the top of the stack and the base of the current stack frame.

Off-stack data is typically addressed via a descriptor. This is a 64-bit structure containing a 32-bit virtual address, plus 32 bits of control information. The control information identifies whether the area being addressed is code or data; in the case of data, the size of the items addressed (1, 8, 32, 64, or 128 bits); a flag to indicate whether hardware array-bound-checking is required; and various other refinements.

The 32-bit virtual address comprises a 14-bit segment number and an 18-bit displacement within the segment.

Technically the order code is not part of the 2900 architecture: this fact has been exploited to emulate other machines by microcoding their instruction sets. In practice, however, all machines in the 2900 series implement a common order code or instruction set, known as the PLI (Primitive Level Interface). This is designed primarily as a target for high-level language compilers.

There are a number of registers, each designed for a special purpose. An accumulator register (ACC) is available for general-purpose use, and may be 32, 64, or 128 bits in size. The B register is used for indexing into arrays; the LNB register points to the base of the current stack frame; the DR register is used for holding descriptors for addressing into the heap, and so on.

Data formats recognized by the PLI instructions include 32-bit, 64-bit, and 128-bit twos-complement integers; 64-bit and 128-bit floating point; 32-bit, and 64-bit, and 128-bit packed decimal. Conventionally (and strangely to those tutored on C and UNIX) the boolean value true is represented as zero, false as minus one. Strings are held as arrays of 8-bit characters, conventionally encoded in EBCDIC (though ICL's EBCDIC has minor variations from IBM's version).

Because some of the PLI instructions, notably those for procedure calling (especially system calls) are very powerful, instruction rates on 2900 Series are not always directly comparable with those on competitors' hardware. ICL marketing literature tended to use the concept of "IBM equivalent MIPS", being the MIPS rating of an IBM mainframe that achieved the same throughput in application benchmarks. In truth, the efficiencies achieved by the 2900 architecture, notably the avoidance of system call overheads, compensated for relatively slow raw hardware performance.

Implementations

The first machines announced in the 2900 Series were the ICL2980 and 2970. The ICL2980 allowed one or two order code processors, each operating at up to 3 million instructions per second, with real memory configurable up to 8 megabytes, with a 500 nanosecond access time. The 2970 and the subsequent 2960, unlike the 2980, were microcoded, and thus allowed emulation of instruction sets such as that of the older 1900 Series.

A 2900 Series machine was constructed from a number of functional modules; a module being contained within a standard size cabinet.

The interconnections, between these functional modules, were optical. Some peripheral devices could be optically connected too, but were usually connected using ICL's Standard Interface (Socket/Plug and cable set) to a Port Adapter on the SMAC. Logical addressing was employed and used a group scheme to identify system components in terms of Ports, Trunks and Streams.

A Port was a generic name AND hardware address within a Trunk to which a peripheral device would be assigned (like "DISC60"), a Trunk was a generic name for a controller for a number of Port devices and a Stream was the generic name for the optical channel under which many (1 or more) Trunks could be referenced.

The boot process for the 2900 Series is worthy of a special mention: the OCP contained a mini OPER terminal and a cassette deck. At boot, the OCP would perform it's Initial Program Load (IPL) from the cassette. The IPL code provided the means for the OCP to discover the system's hardware configuration, by enquiring down the Stream(s), Trunk(s) and Port(s) to find the default or manually elected boot device for the microcode set and/or Operating System to be booted. The cassette load method also allowed engineering staff to load and execute diagnostic software.

Sources

* The ICL 2900 Series. J. K. Buckle. Macmillan Computer Science Series, 1978. ISBN 0-333-21917-1.
* An Outline of the ICL 2900 Series System Architecture. J. L. Keedy. In "Computer Structures: Principles and Examples", ed Daniel P. Siewiorek, C. Gordon Bell, and Allen Newell. Originally published in "Australian Computer Journal", vol. 9, no. 2, July 1977, pp. 53-62. Available [http://research.microsoft.com/users/gbell/Computer%5FStructures%5FPrinciples%5Fand%5FExamples/csp0267.htm online]

See also

* VME - the VME operating system for the ICL 2900 Series

* ICT 1900
* ICL Series 39


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • ICL VME — This article is about the operating system. VME may also refer to the VMEbus computer bus. Virtual Machine Environment Company / developer International Computers Limited, Fujitsu Programmed in S3, C Initial release mid 1970s Supported… …   Wikipedia

  • ICL Direct Machine Environment — Direct Machine Environment, abbreviated DME, was a mainframe environment for the ICL 2900 Series of computing systems from International Computers Limited that was developed in the 1970s. DME was more or less an ICL 1900 order code processor in… …   Wikipedia

  • ICL Series 39 — The ICL Series 39 was a range of mainframe and minicomputer computer systems released by the UK manufacturer ICL in 1985. Origins The Series 39 range was based upon the New Range concept and the VME operating system from the company s ICL 2900… …   Wikipedia

  • ICL DRS — The ICL DRS was a range of departmental computers from International Computers Limited (ICL). Standing originally for Distributed Resource System, the full name was later dropped in favour of the abbreviation. During the mid 1980s separate Office …   Wikipedia

  • ICL Distributed Array Processor — The Distributed Array Processor (DAP) produced by International Computers Limited (ICL) was the world s first commercial massively parallel computer. The original paper study was complete in 1972 and building of the prototype began in 1974. The… …   Wikipedia

  • International Computers Limited — Former type Private Industry Computer hardware, Computer software Fate Acquired Successor Fujitsu Services Founded 1968 ( …   Wikipedia

  • ICT 1900 — is the name given to a series of mainframe computers released by International Computers and Tabulators (ICT) in the 1960s. 1900 Series computersThese varied in computing power and the models included:* ICT 1901 * ICT 1902 * ICT 1903 * ICT 1904 * …   Wikipedia

  • Content Addressable File Store — The Content Addressable File Store (CAFS) was a hardware device developed by International Computers Limited (ICL) that provided a disk storage with built in search capability. The motivation for the device was the discrepancy between the high… …   Wikipedia

  • Manchester computers — Replica of the Small Scale Experimental Machine (SSEM) at the Museum of Science and Industry in Manchester The Manchester computers …   Wikipedia

  • Order code processor — (OCP) is a term used in ICL 2900 Series and ICL Series 39‎ machines for central processing unit (CPU).[1][2] See also International Computers Limited‎ Notes ^ …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”