Large cent (United States coin)

Large cent (United States coin)
Obverse and reverse of a 1794 large cent in the Liberty Cap series.

The United States large cent was a coin with a face value of 1/100 of a United States dollar. Its diameter varied between 27mm and 29mm. The first official mintage of the large cent was in 1793, and its production continued until 1857, when it was officially replaced by the modern-size one-cent coin (commonly called the penny).

Contents

List of designs

General history

First struck in 1793, the large cent was coined every year from 1793 to 1857 minus one year (1815) due to a shortage of copper.[1] The Philadelphia Mint produced all large cents, which contained twice the copper of the half cent. This made the coins bulky and heavy, bigger than modern-day U.S. Quarters.[2]

Flowing Hair cents, chain reverse (1793)

Henry Voight's design was almost universally criticized in its time for its unattractiveness and perceived allusion to slavery. It bears the distinction, however, of being the first official coinage minted by the federal government on its own equipment and premises. 36,103 were minted. Its low survival rate on top of a small mintage, coupled with being the first regular federal issue and a one-year design and type, has created an extremely strong demand from generations of numismatists. As a result, all surviving specimens command high prices ranging from $2,000-$3,000 in the absolute lowest state of preservation to over $500,000 in the highest.

Flowing Hair cents, wreath reverse (1793)

The Mint caved to the intense ridicule later in 1793, and Mint Director David Rittenhouse ordered Adam Eckfeldt to revise the obverse and reverse designs. Liberty's bust was redesigned with even longer, wilder hair, and the chain was removed from the reverse in favor of a wreath. Scholars are undecided as to what plant or plants are depicted in the wreath, with several varieties extant. Total mintage of the wreath reverse numbered about 63,000 pieces.

Liberty Cap cents (1793–1796)

Rittenhouse was dissatisfied with Eckfeldt's designs, and with the criticism of the Chain cents fresh in his mind, he hired Joseph Wright to do yet another redesign in the denomination's troubled first year. Wright's design faced Liberty to the right and "tamed" her wild hair. The cap was added as an ancient symbol of freedom. The reverse design was revised to a recognizable laurel wreath, and future Chief Engraver Robert Scot had a hand in several minor revisions to the design over the next three years.

This design was more successful and it was continued into 1796. In 1795, planchets became too thin for the edge lettering because of a weight reduction, so the mint stopped edge lettering on the cent, and the rest of these coins were made with a plain edge. Four coins from 1795 are known to have a reeded edge.[3]

Draped Bust cents (1796–1807)

Robert Scot redesigned the whole of United States coinage for 1796, applying a new design featuring a bust of Liberty wearing a drapery at the neckline and a ribbon in her flowing hair. The reverse design now featured an olive wreath. As with earlier types, several minor revisions to the design were made in the first few years, with the final 1797 design lasting through the end of the type in 1807.

Classic Head cents (1808–1814)

An 1811 cent

John Reich, assistant to Chief Engraver Scot, was appointed by new Mint Director Robert Patterson to redesign Scot's Draped Bust cent (along with every other circulating coin design). The so-called "Classic Head" derives its name from the fillet worn by Liberty on the obverse, though the fillet was worn only by male athletes in ancient Greece. The copper used during the years in which Classic Head cents were minted was of a higher quality, containing less metallic impurity. Consequently, they were softer and more prone to wear and corrode quickly than issues before or after. As a result, unimpaired, high-grade specimens are especially difficult to obtain and fetch strong premiums when they appear on market, especially with original red or red-brown mint luster.

Coronet cents (1816–1857)

Matron Head, or Middle Dates (1816–1839)

As a response to public criticism of the Classic Head, the Mint assigned Chief Engraver Scot to redesign the cent in 1816. This newest design enlarged the obverse portrait, giving Liberty a much more mature look (leading to the Matron Head reference), and surrounded the portrait with stars along the outer edge of the coin. The "Matron head" design was modified in 1835 to give Liberty a younger look and matron head cents continued to be made until 1839. These can be worth up to 1 million dollars.

Braided Hair, or Late Dates (1839–1857)

An 1855 Braided Hair cent

Facing more negative public reaction, the Coronet cents were redesigned in 1835 by new Chief Engraver Christian Gobrecht. This last major change to the coin updated the obverse by giving Liberty a slimmer, more youthful appearance. Minor tweaks continued through 1843, and the 1843 design prevailed through the end of mintage in 1857. Some 11 years after the large cent was discontinued, a mint employee coined several large cents dated 1868, almost certainly for sale as instant rarities to numismatists. Fewer than a dozen of these unofficial issues, struck in both bronze and copper-nickel, are known to survive.

See also

References

  1. ^ Whitman The Official Guide Book to United States Coins 64th Edition 2010 Page #93
  2. ^ "Guide to United States Coinage". Littleton Coin Company. http://www.littletoncoin.com/webapp/wcs/stores/servlet/Display%7C10001%7C10001%7C-1%7C%7CLearnNav%7CGuide-to-United-States-Coinage.html. Retrieved 2011-11-10. 
  3. ^ Yeoman,R.S. A Guide Book of United States Coins 2009 edition.

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Cent (United States coin) — Infobox Coin Country = United States Denomination = Cent (Penny) Value = 0.01 Unit = U.S. dollar Mass troy oz = 0.080 Mass = 2.5 Diameter inch = 0.750 Diameter = 19.05 Thickness inch = 0.061 Thickness = 1.55 Edge = Plain Composition = Copper… …   Wikipedia

  • Half cent (United States coin) — The half cent coin was produced in the United States from 1793 1857. The half cent piece was made of 100% copper. It was slightly smaller than a modern U.S. quarter, with a diameter of 23.5 mm (0.93 inch). Although it is the lowest face value… …   Wikipedia

  • Penny (United States coin) — Cent (Penny) United States Value 0.01 of a U.S. dollar Mass  2.5 g  (0.080 troy oz) Diameter  19.05 mm  (0.750 in) Thickness …   Wikipedia

  • Large cent — can refer to: *the United States one cent coin minted until 1857; see Large cent (United States coin). *the Canadian one cent coin minted until 1920 …   Wikipedia

  • Nickel (United States coin) — This article is about the U.S. coin; for its Canadian counterpart made intermittently of 99.9% nickel between 1922 1981, and also called the nickel, see Nickel (Canadian coin). This article is specifically about the U.S. five cent coin; for its… …   Wikipedia

  • Dollar (United States coin) — Infobox Coin Country = United States Denomination = Dollar Value = 1 Unit = U.S. dollar Mass troy oz = 0.260 Mass = 8.100 Diameter inch = 1.043 Diameter = 26.5 Thickness inch = 0.079 Thickness = 2.00 Edge = Plain w/ incused inscriptions… …   Wikipedia

  • Three-cent piece (United States coin) — The United States three cent piece was a unit of currency equaling 3/100th of a United States dollar. The mint produced two different three cent coins: the three cent silver and the three cent nickel. HistoryThe three cent coin has an unusual… …   Wikipedia

  • Half dollar (United States coin) — Infobox Coin Country = United States Denomination = half dollar Value = 0.5 Unit = U.S. dollar Mass troy oz = 0.365 Mass = 11.340 Diameter inch = 1.205 Diameter = 30.61 Thickness inch = 0.085 Thickness = 2.15 Edge = 150 reeds Composition = 91.67% …   Wikipedia

  • Dime (United States coin) — Dime United States Value 0.10 U.S. dollar Mass  2.268 g  (0.0729 troy oz) Diameter  17.91 mm  (0.705 in) Thickness   …   Wikipedia

  • Stella (United States coin) — Stella Value: 4.00 U.S. dollars Mass: 7.00g Diameter: 22.0 mm Thickness …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”