History of rail transport

History of rail transport

The history of rail transport dates back nearly 500 years, and includes systems with man or horse power and rails of wood or stone. Modern rail transport systems first appeared in England in the 1820s. These systems, which made use of the steam locomotive, were the first practical forms of mechanized land transport, and they remained the primary form of mechanized land transport for the next 100 years.

Origins

Ancient world

The earliest evidence of a railway found thus far was the 6 to 8.5 km long "Diolkos" wagonway, which transported boats across the Isthmus of Corinth in Greece since around 600 BC.Verdelis, Nikolaos: "Le diolkos de L'Isthme", "Bulletin de Correspondance Hellénique", Vol. 81 (1957), pp. 526-529 (526)] Cook, R. M.: "Archaic Greek Trade: Three Conjectures 1. The Diolkos", "The Journal of Hellenic Studies", Vol. 99 (1979), pp. 152-155 (152)] Drijvers, J.W.: "Strabo VIII 2,1 (C335): Porthmeia and the Diolkos", "Mnemosyne", Vol. 45 (1992), pp. 75-76 (75)] Raepsaet, G. & Tolley, M.: "Le Diolkos de l’Isthme à Corinthe: son tracé, son fonctionnement", "Bulletin de Correspondance Hellénique", Vol. 117 (1993), pp. 233–261 (256)] Lewis, M. J. T., [http://www.sciencenews.gr/docs/diolkos.pdf "Railways in the Greek and Roman world"] , in Guy, A. / Rees, J. (eds), "Early Railways. A Selection of Papers from the First International Early Railways Conference" (2001), pp. 8-19 (11)] Wheeled vehicles pulled by men and animals ran in grooves in limestone, which provided the track element, preventing the wagons from leaving the intended route. The Diolkos was in use for over 650 years, until at least the 1st century AD. The first horse-drawn wagonways also appeared in ancient Greece, with others to be found on Malta and various parts of the Roman Empire, using cut-stone tracks.

Early railways

Wagonways or tramways are thought to have developed in Germany in the 1550s to facilitate the transport of ore tubs to and from mines, utilising primitive wooden rails. Such an operation was illustrated in 1556 by Georgius Agricola. [Georgius Agricola (trans Hoover), "De re metallica" (1913)]

The technology spread across Europe and had certainly arrived in Britain by the early 1600s. The Wollaton Wagonway was probably the earliest British installation, completed in 1604 , and recorded as running from Strelley to Wollaton near Nottingham. Another early wagonway is noted at Broseley in Shropshire from 1605 onwards. Huntingdon Beaumont (who was concerned with mining at Strelley) also laid down broad wooden rails near Newcastle upon Tyne, on which a single horse could haul fifty or sixty bushels (130-150 kg) of coal. [M. J. T. Lewis, "Early Wooden railways". ]

By the eighteenth century, such wagonways and tramways existed in a number of areas. Ralph Allen, for example, constructed a tramway to transport stone from a local quarry to supply the needs of the builders of the Georgian terraces of Bath. The Battle of Prestonpans, in the Jacobite Rebellion, was fought astride a wagonway.Fact|date=June 2007 This type of transport spread rapidly through the whole Tyneside coal-field, and the greatest number of lines were to be found in the coalfield near Newcastle upon Tyne, where they were known locally as wagonways. Their function in most cases was to facilitate the transport of coal in chaldron wagons from the coalpits to a staithe (a wooden pier) on the river bank, whence coal could be shipped to London by collier brigs. The wagonways were engineered so that trains of coal wagons could descend to the staith by gravity, being braked by a brakesman who would "sprag" the wheels by jamming them. Wagonways on less steep gradients could be retarded by allowing the wheels to bind on curves.. [Wikipedia Mansfield and Pinxton Railway] As the work became more wearing on the horses, a vehicle known as a dandy wagon was introduced, in which the horse could rest on downhill stretches.

Because rails were smoother than roads, a greater quantity and tonnage of bulk goods such as coal and minerals could be carried, and without damage to highways. Naturally, a great deal of inventiveness was focussed upon improving the rails and reducing the degree of friction between wheel and rail. In the late 1760s, the Coalbrookdale Company began to fix plates of cast iron to the wooden rails. These (and earlier railways) had flanged wheels as on modern railways, but another system was introduced, in which unflanged wheels ran on L-shaped metal plates - these became known as plateways. John Curr, a Sheffield colliery manager, invented this flanged rail, though the exact date of this is disputed. The plate rail was taken up by Benjamin Outram for wagonways serving his canals, manufacturing them at his Butterley ironworks. Meanwhile William Jessop, a civil engineer, had used a form of edge rail successfully for an extension to the Charnwood Forest Canal at Nanpantan, Loughborough, Leicestershire in 1789. Jessop became a partner in the Butterley Company in 1790.

As the colliery and quarry tramways and wagonways grew longer, the possibility of using the technology for the public conveyance of goods suggested itself. On 26 July 1803, Jessop opened the Surrey Iron Railway in south London - arguably, the world's first public railway, albeit a horse-drawn one. It was not a railway in the modern sense of the word, as it functioned like a turnpike road. There were no official services, as anyone could bring a vehicle on the railway by paying a toll.

It was not until 1825 that the success of the Stockton and Darlington Railway proved that the railways could be made as useful to the general shipping public as to the colliery owner. This railway broke new ground by using rails made of rolled wrought iron, produced at Bedlington Ironworks in Northumberland. [A. Pacey, "Technology in World Civilisation" (MIT Press, Cambridge, Mass. 1990), 135. ] Such rails were stronger. This railway linked the town of Darlington with the port of Stockton-on-Tees, and was intended to enable local collieries (which were connected to the line by short branches) to transport their coal to the docks. As this would constitute the bulk of the traffic, the company took the important step of offering to haul the colliery wagons or chaldrons by locomotive power, something that required a scheduled or timetabled service of trains. However, the line also functioned as a toll railway, where private horse drawn wagons could be operated upon it. This curious hybrid of a system (which also included, at one stage, a horse drawn passenger wagon) could not last, and within a few years, traffic was restricted to timetabled trains. (However, the tradition of private owned wagons continued on railways in Britain until the 1960s.)

team power introduced

James Watt, a Scottish inventor and mechanical engineer, was responsible for improvements to the steam engine of Thomas Newcomen, hitherto used to pump water out of mines. Watt developed a reciprocating engine, capable of powering a wheel. Although the Watt engine powered cotton mills and a variety of machinery, it was a large stationary engine. It could not be otherwise; the state of boiler technology necessitated the use of low pressure steam acting upon a vacuum in the cylinder, and this mode of operation needed a separate condenser and an air pump. Nevertheless, as the construction of boilers improved, he investigated the use of high pressure steam acting directly upon a piston. This raised the possibility of a smaller engine, that might be used to power a vehicle, and he actually patented a design for a steam locomotive in 1784. His employee William Murdoch produced a working model of a self propelled steam carriage in that year. [cite book
last =Gordon
first =W.J.
authorlink =
coauthors =
title =Our Home Railways, volume one
publisher =Frederick Warne and Co
date =1910
location =London
pages =7-9
url =
doi =
id =
]

The first railway steam locomotive was built in 1804 by Richard Trevithick, an English engineer born in Cornwall. (The story goes that it was constructed to satisfy a bet by Samuel Homfray, the local iron master.) This used high pressure steam to drive the engine by one power stroke. (The transmission system employed a large fly-wheel to even out the action of the piston rod.) His locomotive had no name, and was used on the Merthyr Tydfil Tramroad in South Wales (sometimes - but incorrectly - called the Penydarren Tramroad).Trevithick later demonstrated a locomotive operating upon a piece of circular rail track in Bloomsbury, London, the "Catch-Me-Who-Can", but never got beyond the experimental stage with railway locomotives, not least because his engines were too heavy for the cast-iron plateway track then in use. Despite his inventive talents, Richard Trevithick died in poverty, with his achievement being largely unrecognized. [cite book |title=The Pictorial Encyclopedia of Railways |author=Hamilton Ellis |publisher=The Hamlyn Publishing Group |year=1968 |pages=12]

The impact of the Napoleonic Wars resulted in (amongst other things) a dramatic rise in the price of fodder. This was the imperative that made the locomotive an economic proposition, if it could be perfected.

The first commercially successful steam locomotive was Matthew Murray's rack locomotive "The Salamanca" built for the narrow gauge Middleton Railway in 1812. This twin cylinder locomotive was not heavy enough to break the edge-rails track, and solved the problem of adhesion by a cog-wheel utilising slots cast in one of the rails. It was the first rack railway.

This was followed in 1813 by the "Puffing Billy" built by Christopher Blackett and William Hedley for the Wylam Colliery Railway, the first successful locomotive running by adhesion only. This was accomplished by the distribution of weight by a number of wheels. Puffing Billy is now on display in the Science Museum in London, the oldest locomotive in existence. [cite book |title=The Pictorial Encyclopedia of Railways |author=Hamilton Ellis |publisher=The Hamlyn Publishing Group |year=1968 |pages=20-22]

In 1814 George Stephenson, inspired by the early locomotives of Trevithick, Murray and Hedley, persuaded the manager of the Killingworth colliery where he worked to allow him to build a steam-powered machine. He built the "Blücher", one of the first successful flanged-wheel adhesion locomotives. Stephenson played a pivotal role in the development and widespread adoption of the steam locomotive. His designs considerably improved on the work of the earlier pioneers. In 1825 he built the "Locomotion" for the Stockton and Darlington Railway which became the first public steam railway in the world. [cite book|title=The Pictorial Encyclopedia of Railways|author=Hamilton Ellis|publisher=The Hamlyn Publishing Group|year=1968|pages=24-30]

The Birth of the Railway

In 1812 Oliver Evans, a United States engineer and inventor, published his vision of what steam railways could become, with cities and towns linked by a network of long distance railways plied by speedy locomotives, greatly reducing the time required for personal travel and for transport of goods. Evans specified that there should be separate sets of parallel tracks for trains going in different directions. Unfortunately, conditions in the infant United States did not enable his vision to take hold.

This vision had its counterpart in Britain, where it proved to be far more influential. William James, a rich and influential surveyor and land agent, was inspired by the development of the steam locomotive to suggest a national network of railways. He was responsible for proposing a number of projects that later came to fruition, and he is credited with carrying out a survey of the Liverpool and Manchester Railway. Unfortunately, he became bankrupt and his schemes were taken over by George Stephenson and others. However, he is credited by many historians with the title of "Father of the Railway".cite book|author=Miles Macnair|title=William James (1771-1837): the man who discovered George Stephenson|publisher=Railway and Canal Historical Society|location=Oxford|date=2007|isbn=978-0-901461-54-4]

The success of the Stockton and Darlington encouraged the rich investors of the rapidly industrialising North West of England to embark upon a project to link the rich cotton manufacturing town of Manchester with the thriving port of Liverpool. The Liverpool and Manchester Railway was the first modern railway, in that both the goods and passenger traffic was operated by scheduled or timetabled locomotive hauled trains. At the time of its construction, there was still a serious doubt that locomotives could maintain a regular service over the distance involved. A widely reported competition was held in 1829 called the Rainhill Trials, to find the most suitable steam engine to haul the trains. A number of locomotives were entered, including Novelty, Perseverance, and Sans Pareil. The winner was Stephenson's Rocket, which had superior steaming qualities as a consequence of the installation of a multi-tubular boiler (suggested by Henry Booth, a director of the railway company).

The promoters were mainly interested in goods traffic, but after the line opened on 15 September 1830, they found to their amazement that passenger traffic was just as remunerative. The success of the Liverpool and Manchester railway influenced the development of railways elsewhere in Britain and abroad. The company hosted many visiting deputations from other railway projects, and many railwaymen received their early training and experience upon this line.

It must be remembered that the Liverpool and Manchester line was still a short one, linking two towns within an English shire county. The world's first trunk line can be said to be the Grand Junction Railway, opening in 1837, and linking a mid point on the Liverpool and Manchester Railway with Birmingham, by way of Crewe, Stafford, and Wolverhampton.

Further Development

The earliest locomotives in revenue service were small four-wheeled locos similar to the Rocket. However, the inclined cylinders caused the engine to rock, so they first became horizontal and then, in his "Planet" design, were mounted inside the frames. While this improved stability, the "crank axles" were extremely prone to breakage. Greater speed was achieved by larger driving wheels at expense of a tendency for wheel slip when starting. Greater tractive effort was obtained by smaller wheels coupled together, but speed was limited by the fragility of the cast iron connecting rods. Hence, from the beginning, there was a distinction between the light fast passenger loco and the slower more powerful goods engine. Edward Bury, in particular, refined this design and the so-called "Bury Pattern" was popular for a number of years, particularly on the London and Birmingham.

Meanwhile by 1840 Stephenson had produced larger, more stable, engines in the form of the 2-2-2 "patentee" and six-coupled goods engines. Locomotives were travelling longer distances and being worked more extensively. The North Midland Railway expressed their concern to Robert Stephenson who was, at that time, their general manager, about the effect of heat on their fireboxes. After some experiments, he patented his so-called Long Boiler design. These became a new standard and similar designs were produced by other manufacturers, particularly Sharp Brothers whose engines became known affectionately as "Sharpies"

The longer wheelbase for the longer boiler produced problems in cornering. For his six-coupled engines, Stephenson removed the flanges from the centre pair of wheels. For his express engines, he shifted the trailing wheel to the front in the 4-2-0 formation, as in his "Great A." There were other problems. One was that the firebox was restricted in size, or had to be mounted behind the wheels. The other was that, the generally held opinion arose that, to improve stability, the centre of gravity should be kept low.

The most extreme outcome of this was the Crampton locomotive which mounted the driving wheels behind the firebox and could be made very large in diameter. These achieved the hitherto unheard of speed of convert|70|mi/h|km/h|abbr=on but were very prone to wheelslip. With their long wheelbase, they were unsuccessful on Britain's winding tracks, but became popular in the USA and France, where the popular expression became to "prendre le Crampton".

John Gray of the London and Brighton Railway was one who disbelieved the necessity for a low centre of gravity and produced a series of locos that were much admired by David Joy who developed the design at the firm of E. B. Wilson and Company to produce the 2-2-2 Jenny Lind locomotive, one of the most successful passenger locomotives of its day. Meanwhile the Stephenson 0-6-0 Long Boiler locomotive with inside cylinders became the archetypical goods engine

Expanding network

Railways quickly became essential to the swift movement of goods and labour that was needed for industrialization. In the beginning, canals were in competition with the railroads, but the railroads quickly gained ground as steam and rail technology improved, and railroads were built in places where canals were not practical.

By the 1850s, many steam-powered railways had reached the fringes of built-up London. But the new lines were not permitted to demolish enough property to penetrate the City or the West End, so passengers had to disembark at Paddington, Euston, Kings Cross, Fenchurch Street, Charing Cross, Waterloo or Victoria and then make their own way via hackney carriage or on foot into the centre, thereby massively increasing congestion in the city. A Metropolitan Railway was built under the ground to connect several of these separate railway terminals, and thus became the world's first "Metro."

The first Russian railway

Russia was in need of improved transportation and geographically suited to railroads, with long flat stretches of land and comparatively simple land acquisition. It was hampered, however, by its outmoded political situation and a shortage of capital. Yefim and Miron Cherepanovs, Russian factory engineers, actually invented and built successful working locomotives for a mine tramway between 1832 and 1835, but their inventiveness was not pursued. Foreign initiative and capital were required. The first major public railroad was the Saint Petersburg-Tsarskoye Selo Railway, proposed and built by a Bohemian engineer, František Antonín Gerstner the son of František Josef Gerstner, in 1836.

Railroad growth in the United States 1830-1890

In 1830, there were only convert|39.8|mi|km of railroad track laid in America. There is ample historical evidence that a more correct figure would be a little over convert|75|mi|km due to a failure to count special purpose railroads hauling only coal and granite. [cite book |author=Henry V. Poor |title= Railroads and Canals of the United States of America |pages=p.85,415] After this, railroad lines grew rapidly. Ten years later, in 1840, the railways had grown to convert|2755.18|mi|km. Two decades after that, the number had reached convert|28919.79|mi|km, and 20 years after that, the number had tripled once more to convert|87801.42|mi|km. [cite book |author=United States Census Bureau |title= Report on the Agencies of Transportation in the United States at Tenth Census 1880 |pages=p.308-9]

RAILROAD ACCUMULATED MILEAGE BY REGION
1830 1840 1850 1860 1870 1880 1890
ME,NH,VT,MA,RI,CT 29.80 513.34 2,595.57 3,644.24 4,326.73 5,888.09 6,718.19
NY,PA,OH,MI,IN,MD,DE,NJ,DC 1,483.76 3,740.36 11,927.21 18,291.93 28,154.73 40,825.60
VA,WV,KY,TN,MS,AL,GA,FL,NC,SC 10.00 737.33 2,082.07 7,907.79 10,609.60 14,458.33 27,833.15
IL,IA,WI,MO,MN

46.48 4,951.47 11,030.85 22,212.98 35,579.80
LA,AR & OK(Indian) Territory
20.75
107.00 250.23 331.23 1,621.11 5,153.91
(Terr.)ND/SD,NM,WY,MT,ID,UT,AZ,WA
(States)NE,KS,TX,CO,CA,NV,OR
238.85 4,577.99 15,466.18 47,451.47
TOTAL USA 39.80 2,755.18 8,571.48 28,919.79 49,168.33 87,801.42 163,562.12
[cite book |author=United States Census Bureau |title= Report on Transportation Business in the United States at the Eleventh Census 1890 |page=p. 4]

In 1869, the symbolically important trans-continental railroad was completed in the United States with the driving of a golden spike.

Diesel and electric engines

Electric railways revolutionize urban transport

Prior to the development of electric railways, most overland transport aside from the railways had consisted primarily of horse powered vehicles. Placing a horse car on rails had enabled a horse to move twice as many people, and so street railways were born. In January 1888, Richmond, Virginia served as a proving grounds for electric railways as Frank Sprague built the first working electric streetcar system there. By the 1890s, electric power became practical and more widespread, allowing extensive underground railways. Large cities such as London, New York, and Paris built subway systems. When electric propulsion became practical, most street railways were electrified. These then became known as "streetcars," "trolleys," "trams" and "Strassenbahn."

In many countries, these electric street railways grew beyond the metropolitan areas to connect with other urban centers. In the USA, "electric interurban" railroad networks connected most urban areas in the states of Illinois, Indiana, Ohio, Pennsylvania and New York. In Southern California, the Pacific Electric Railway connected most cities in Los Angeles and Orange Counties, and the Inland Empire. There were similar systems in Europe. One of the more notable rail systems connected every town and city in Belgium. One of the more notable tramway systems in Asia is the Hong Kong Tramways, which started operation in 1904 and run exclusively on double-decker trams.

The remnants of these systems still exist, and in many places they have been modernized to become part of the urban "rapid transit" system in their respective areas. In the past thirty years increasing numbers of cities have restored electric rail service by building "light rail" systems to replace the tram system they removed during the mid-20th century.

Diesel power

Diesel-electric locomotives could be described as electric locomotives with an on-board generator powered by a diesel engine. The first diesel locomotives were low-powered machines, diesel-mechanical types used in switching yards. Diesel and electric locomotives are cleaner, more efficient, and require less maintenance than steam locomotives. They also required less specialized skills in operation and their introduction diminished the power of railway unions in the USA (one of the earliest countries to adopt diesel power on a wide scale). By the 1970s, diesel and electric power had replaced steam power on most of the world's railroads.

In the 20th century, road transport and air travel replaced railroads for most long-distance passenger travel in the United States, but railroads remain important for hauling freight in the United States, and for passenger transport in many other countries.

High-speed rail

The late 20th century saw high-speed rail systems such as the Shinkansen, the TGV and the Eurostar. Maglev trains are being introduced today.

References

See also

* Timeline of railway history
*
* Historical sizes of railroads in North America
* History of rail transport by country
* Oldest railroads in North America
* Land speed record for railed vehicles
* George Bradshaw, originator of the railway timetable

Bibliography

*
* Leland H. Jenks, "Railroads as an Economic Force in American Development," "The Journal of Economic History", Vol. 4, No. 1 (May, 1944), 1-20.
*Harvard reference | Surname=Smith | Given=R S.| Authorlink=Richard Smith | Title=Huntingdon Beaumont Adventurer in Coal Mines | Journal=Renaissance and Modern Studies| Year=1957 | Page=115 to 153 .
*Harvard reference | Surname=Smith | Given=R S. | Authorlink=Richard Smith | Title=England's First Rails : A reconsideration | Journal=Renaissance and Modern Studies| Year=1960 | Page=119 to 134 .
*Harvard reference | Surname= Lewis | Given=M J T | Title=Early Wooden Railways | Publisher=Routledge Keegan Paul (out of print) | Place=London, England | Year=1970 .
* Rainer Fremdling, "Railways and German Economic Growth: A Leading Sector Analysis with a Comparison to the United States and Great Britain," "The Journal of Economic History", Vol. 37, No. 3. (Sep., 1977), pp. 583-604.
* O . S. Nock, ed. "Encyclopedia of Railways" (London, 1977), worldwide coverage, heavily illustrated
* Hadfield, C. and Skempton, A. W. "William Jessop, Engineer" (Newton Abbot 1979)
* Patrick O’Brien. "Railways and the Economic Development of Western Europe, 1830-1914" (1983)
*Harvard reference | Surname=Smith | Given= R S | Title=Early Coal Mining Around Nottingham 1500 - 1650 | Publisher=University of Nottingham (out of print | Year=1989 .
* John Stover, "American Railways" (2nd ed 1997)
* Jack Simmons and Gordon Biddle, (editors). "The Oxford Companion to British Railway History: From 1603 to the 1990s" (2nd ed 1999)
* John Stover, "The Routledge Historical Atlas of the American Railroads" (2001)
* Lewis, M. J. T., [http://www.sciencenews.gr/docs/diolkos.pdf "Railways in the Greek and Roman world"] , in Guy, A. / Rees, J. (eds), "Early Railways. A Selection of Papers from the First International Early Railways Conference" (2001), pp. 8-19 (10-15)
*
* Riley, C. J. "The Encyclopedia of Trains & Locomotives" (2002).
*Harvard reference | Surname=New | Given=J R. | Authorlink=John New | Title=400 years of English railways - Huntingdon Beaumont and the early years | Journal=Backtrack | Volume=18 | Issue=11 (Nov) | Year=2004 | Page=660 to 665 .
*Harvard reference | Surname=Jenks | Given=Leyland | Title=Railroads as an Economic Force in American Development | Journal=The Journal of Economic History | Volume=4 | Issue=1 (May) | Year=1944 | Page=1 to 20 .

External links

* [http://tigger.uic.edu/~rjensen/railroad.htm WWW Guide to "Railroad History"]
* [http://americanhistory.si.edu/archives/d8523.htm John H. White, Jr. Reference Collection, 1880s-1990] Archives Center, National Museum of American History, Smithsonian Institution.
* [http://books.google.com/books?ie=UTF-8&vid=LCCNa13002565&id=VdKN4UZ57qAC&dq=railways+africa&pg=PA4&printsec=4&lpg=PA4 "Foreign Railways of the World: Containing in One Volume, the Names of Officers, Length, Capital,..." (1884)]
* Waggonway Research Circle: [http://www.waggonways.fsnet.co.uk/woll_wag_leaflet_a4.pdf The Wollaton Wagonway of 1604. The World’s First Overland Railway] , August 2005
* [http://oldrailhistory.com/index.php?option=com_frontpage&Itemid=1 U. S. Railroads 1826 - 1850] .


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • History of rail transport in North America — 1865 to 1914Much how the clock at the local railroad station was used to set the time for the area, railroad use and development set the pace of industrialization and the United States economy during 1865 to 1914. Of course, the rise of American… …   Wikipedia

  • History of rail transport in Australia — This article is part of the history of rail transport by country series Following the British model, Australians generally assumed in the 1850s that railways would be built by the private sector. Private companies built railways in the then… …   Wikipedia

  • History of rail transport in Great Britain — This article is part of the history of rail transport by country series. The railway system of Great Britain, the principal territory of the United Kingdom is the oldest in the world. The system was originally built as a patchwork of local rail… …   Wikipedia

  • History of rail transport in Ireland — This article is part of the history of rail transport by country series The history of rail transport in Ireland began only a decade later than in Great Britain. By its peak in 1920, Ireland had 5,500 route kilometers. The current status is less… …   Wikipedia

  • History of rail transport in Great Britain 1948 - 1994 — This article is part of a series on the History of rail transport in Great Britain The History of rail transport in Great Britain 1948 1994 covers the period when the British railway system was nationalised under British Rail (initially known as… …   Wikipedia

  • History of rail transport in Japan — This article is part of the history of rail transport by country series. The history of rail transport in Japan began in the late Edo period.Early stageThough rail transport had been known through Dutch traders in Dejima, Nagasaki earlier,… …   Wikipedia

  • History of rail transport in the Netherlands — This article is part of the history of rail transport by country series. Opening of the first railroad in the Netherlands The history of rail transport in the Netherlands is generally considered to have begun on September 20, 1839 when the first… …   Wikipedia

  • History of rail transport in Poland — This article is part of the History of rail transport by country series. The history of rail transport in Poland dates back to the first half of the 19th century when railways were built under Prussian, Russian, and Austrian occupation. After… …   Wikipedia

  • History of rail transport in Great Britain 1923 - 1947 — This article is part of a series on the History of rail transport in Great Britain The history of rail transport in Great Britain 1923 1947 covers the period when the British railway system was run by the Big Four group of companies ndash; the… …   Wikipedia

  • History of rail transport in France — The history of rail transport in France dates from the first French railway in 1832 to present day enterprises such as the TGV.BeginningsDuring the 19th century, railway construction began in France with short mineral lines. The building of the… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”