Ultrasonic cleaning

Ultrasonic cleaning

An ultrasonic cleaner is a cleaning device that uses ultrasound (usually from 15-400 kHz) and an appropriate cleaning solution to clean delicate items. The ultrasound is not effective without the cleaning solution; it enhances the effect of a solution appropriate for the item to be cleaned and the soiling.

They are often employed for cleaning of jewellery, lenses and other optical parts, coins, watches, dental and surgical instruments, fountain pens, industrial parts and electronic equipment. In everyday use such devices may be found in use in most jewelry workshops, watchmakers establishments, or in cellular phone repair workshops (where it could be used for cleaning a phone that has been exposed to enough moisture to hinder its operation).

Design and operating principle

In an ultrasonic cleaner, the object to be cleaned is placed in a chamber containing a suitable ultrasound conducting fluid (an aqueous or organic solvent, depending on the application). In aqueous cleaners, the chemical added is a surfactant which breaks down the surface tension of the water base. An ultrasound generating transducer built into the chamber, or lowered into the fluid, produces ultrasonic waves in the fluid by changing size in concert with an electrical signal oscillating at ultrasonic frequency. This creates compression waves in the liquid of the tank which ‘tear’ the liquid apart, leaving behind many millions of microscopic ‘voids’ or ‘partial vacuum bubbles’ (cavitation). These bubbles collapse with enormous energy; temperatures of 10,000 K and pressures of 50,000 lbs per square inch have been reportedFact|date=December 2007; however, they are so small that they do no more than clean and remove surface dirt and contaminants. The higher the frequency, the smaller the nodes between the cavitation points, which allows for cleaning of more intricate detail.

Transducers are usually piezoelectric material (e.g. lead zirconate titanate or barium titanate), and sometimes magnetostrictive (made of a material such as nickel or ferrite). The often harsh chemicals used as cleaners in many industries are not needed, or used in much lower concentrations, with ultrasonic agitation. Ultrasonics are used for industrial cleaning, and also used in many medical and dental techniques and industrial processes.

Cleaning solution

Dirt adheres to the parts, otherwise it would fall off. The cleaning solution should be basically suitable for the job without ultrasonics. Ultrasonic activity (cavitation) helps the solution to do its job; plain water would not normally be effective. The cleaning solution contains ingredients designed to make ultrasonic cleaning more effective. For example, reduction of surface tension increases cavitation levels, so the solution should contain a good wetting agent (surfactant). Aqueous cleaning solutions contain detergents, wetting agents and other components, and have a large influence on the cleaning process. Correct composition of the solution is very dependent upon the item cleaned. The solution should not react in an undesirable way with the item being cleaned. A warm solution is best, at about 50-65°C.

Water-based solutions are more limited in their ability to remove contaminants by chemical action alone than solvent solutions; e.g. for delicate parts covered with thick grease. The effort required to design an effective aqueous-cleaning system for a particular purpose is much greater than for a solvent system.

Flammable solutions should not be used, as they may be hazardous with the high local temperatures generated. Acids and bleaches should only be used if they will not react either with the item being cleaned or the cleaning tank. Solutions should be replenished when ther are noticeably spent.

To test for effectiveness, draw an "X" with an HB (normal) pencil across a wet frosted glass slide. Immerse it, and turn on. The "X" should start to fade immediately, and should be all gone within 10 seconds.To test for evenness of cleaning, take 3 pieces of aluminium foil of about 10×20 cm. Suspend the 3 pieces in the tank, one in the middle and the othe two near opposite edges. Run the ultrasonics for about 10 minutes. The 3 pieces should be about equally perforated and wrinkled.

After cleaning, items should be cleaned with water, either in the cleaner or separately. [http://www.coleparmer.co.uk/techinfo/techinfo.asp?htmlfile=ultrasoniccleaner_faq.htm&ID=792]

If the item cleaned may be damaged by leaving it wet after rinsing, it can be warmed or centrifuged to hasten drying.

Uses

Industrial ultrasonic cleaners are used in the automotive, sporting, printing, marine, medical, pharmaceutical, electroplating, disk drive components, engineering and weapons industries. Cleaners are also used to experimentally determine the elastic constants of many anisotropic materials. Ultrasonic waves can usually only be sent through a material at right angles to the material's surface (normal incidence). In water the angle of incidence for a longidunal wave can be set, inducing both longitudinal and transverse waves in the material. Then by measuring the time of flight for both waves, the elastic constants can be determinedFact|date=September 2008.

Suitable materials for ultrasonic cleaning are stainless and mild steel, aluminium, copper, brass and other alloys, wood, plastics, rubber, and cloth.

Devices for home and hobby use are readily available from about US$20 up as of January 2007.

ee also

* Parts cleaning
* Acoustic cleaners
* Washing machine

External links

* [http://www.prosysmeg.com/technology/articles/megasonics_cleaning.php A supplier of cleaners at exceptionally high frequency, commercial name Megasonic Cleaning]
* [http://www.nationaljewelerssupplies.com/page/NJS/CTGY/ultrasonics A commercial supplier of ultrasonic cleaning equipment for jewellers]
* [http://www.pprc.org/pubs/techreviews/aqueous/aqtech.html Technical Issues and Aqueous Cleaning Systems (not limited to ultrasonic only)]


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Ultrasonic cleaning — Ultrasonic cleaning. См. Ультразвуковая очистка. (Источник: «Металлы и сплавы. Справочник.» Под редакцией Ю.П. Солнцева; НПО Профессионал , НПО Мир и семья ; Санкт Петербург, 2003 г.) …   Словарь металлургических терминов

  • ultrasonic cleaning — ultragarsinis valymas statusas T sritis Standartizacija ir metrologija apibrėžtis Gaminių, dirbinių ar kitokių daiktų valymas tirpaluose arba tirpikliuose ultragarso bangomis. atitikmenys: angl. supersonic cleaning; ultrasonic cleaning vok.… …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

  • ultrasonic cleaning — ultragarsinis valymas statusas T sritis chemija apibrėžtis Dirbinių valymas tirpaluose arba tirpikliuose ultragarso virpesiais. atitikmenys: angl. supersonic cleaning; ultrasonic cleaning rus. ультразвуковая очистка …   Chemijos terminų aiškinamasis žodynas

  • ultrasonic cleaning — ultragarsinis valymas statusas T sritis fizika atitikmenys: angl. supersonic cleaning; ultrasonic cleaning vok. Ultraschallreinigung, f rus. ультразвуковая очистка, f pranc. nettoyage ultra sonique, m …   Fizikos terminų žodynas

  • ultrasonic cleaning — A method used to clean debris, swarf, and foreign material from surfaces by immersing them in a solvent excited with ultrasonic vibrations. Items like filters and bearings are immersed in cleansing fluid and are cleaned by vibrating fluid.… …   Aviation dictionary

  • ultrasonic cleaning — /ʌltrəˌsɒnɪk ˈklinɪŋ/ (say ultruh.sonik kleening) noun a method of cleaning metallic parts by immersion in a fluid through which ultrasonic waves pass …  

  • Ultrasonic testing — Step 1 : The UT probe is placed on the root of the blades to be inspected with the help of a special borescope tool (video probe). Step 2 : Instrument settings are input. Step 3 : The probe is scanned over the blade root. In this case, an… …   Wikipedia

  • ultrasonic bath — noun A piece of industrial or laboratory equipment that consists of a container, or bath, used for cleaning, or mixing things inserted into the bath, by means of sending ultrasonic vibrations through the liquid in the bath …   Wiktionary

  • cleaning — In dentistry, a procedure whereby accretions are removed from the teeth or from a dental prosthesis. SEE ALSO: dental prophylaxis. ultrasonic c. in dentistry, the use of a high frequency vibrating point to remove deposits from tooth structure …   Medical dictionary

  • Megasonic cleaning — is a type of acoustic cleaning, related to ultrasonic cleaning. It is a gentler cleaning mechanism, less likely to cause damage, and is used in wafer, medical implant, and industrial part cleaning. Similar to ultrasonic cleaning, megasonics… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”