M42 lens mount

M42 lens mount

Infobox camera mount
mount_name = M42


caption = Auto-Takumar 1:3.5 35mm
type = Screw
external_diameter = 42mm
inner_diameter = 41mm
tabs = none
flange = 45.5 mm
connectors = Auto aperture
The M42 lens mount is a screw thread mounting standard for attaching lenses to 35 mm cameras, primarily single-lens reflex models. It is more accurately known as the M42 × 1 mm standard, which means that it is a metric screw thread of 42 mm diameter and 1 mm thread pitch. It was first used in Zeiss' Contax S of 1949; this East German branch of Zeiss also sold cameras under the Pentacon name; after merger with other East German photographic manufacturers, the name Praktica was used. M42 thread mount cameras first became well-known in Japan under the Praktica brand, and thus the M42 mount is known as the Praktica thread mount there. Since there were no proprietary elements to the M42 mount, many other manufacturers used it; this has led to it being called the Universal thread mount or Universal screw mount by many. The M42 mount was popularized in the United States by Pentax; thus, it is also known as the Pentax thread mount, despite the fact that Pentax did not originate it.

The Tamron T2 mount also uses a 42mm thread, but the pitch is finer at 0.75 mm, and the T-mount is far further from the film plane.

Evolution and automation

Many manufacturers extended the M42 lens mount to provide extra features. The first change was the inclusion of an automatic stop-down pin. This pin sticks out from the lens and is pushed in to close the aperture to the desired setting for exposure by a lever in the body. This allowed comfortable framing and focusing with the lens wide open and hence a bright viewfinder image with clear focus separation. Many M42 lenses have an A/M switch to select between automatic and manual aperture stop down. "Manual" needs to be selected for use on older M42 cameras and some adapters. Some of the later M42 lenses did not include such a switch, they are Auto-only, which can create problems on certain adapters.

Some later lenses could transmit the selected aperture to the camera body while the lens was still wide open, by means of an additional pin or lug that engaged the camera body. This allowed true open aperture metering with dedicated proprietary lenses.

These mechanisms also created the possibility for automated shutter speed selection by the camera (aperture priority) for
* Fujica ST901 (1975)
* Olympus FTL (1970)
* Pentax Electro Spotmatic (Japan only), ES, Spotmatic F and ESII (1971, 1971, 1973, 1973)
* Praktica EE 2 and EE 3 (1977, 1979, EE = Electric Eye)
* Yashica Electro AX (1972)or automated selection of aperture (shutter priority) for
* Ricoh TLS-EE (1973)
* Petri-designed Exakta FE 2000 (1978)These special lenses could be used on standard M42 cameras as well and standard M42 lenses could be used on those special cameras, but of course without the advanced automation.

Chinon used a different system to provide aperture priority mode with standard Auto-M42 lenses with the CE Memotron (1974), CE-II Memotron and CE-3 Memotron bodies. A similar system was used in the Cosina Hi-Lite EC. The image would be framed and focussed normally with the lens wide open. As the shutter button was depressed the lens would be stopped down to the selected aperture, a quick stop-down meter reading taken, and the shutter fired for correct exposure. Chinon used a then-modern Silicon (Si) metering cell. Its quick reaction time compared to the then-standard CdS cells made it usable for this application. While this method did not offer the same sensitivity advantage of true open-aperture metering, its versatility was much better, as it did not depend on proprietary lenses. Both, Cosina and Chinon, sold their cameras to various other companies for rebranding, which increased the number of almost identical cameras considerably.

Compatibility problems have been reported when mounting lenses with aperture transmission lugs (e.g., SMC Takumars) on older bodies, such as Zenit-E or Mamiya DTL. The aperture lug interlocks with the screws that affix the mount effectively impeding lens removal.

Use on modern cameras

Current bodies with M42 lens mount include the (2007 discontinued) Cosina-made Voigtländer Bessaflex TM, as well as Russian-made Zenit SLRs. M42 lenses are also still in production at KMZ and at Cosina (under Voigtländer brand and the ZS line for Carl Zeiss).

Furthermore, because of the simplicity of the M42 lens mount and the large selection of existing lenses, M42 adaptors exist for all current and many obsolete lens mounts. This allows the use of M42 lenses on modern film and digital SLRs.

M42 adaptors work best on bodies with a flange depth less than or equal to M42's flange depth (such as Pentax bodies with K mount). This allows the lens to be mounted the correct distance from the film or sensor, retaining the original focus range of the lens.

On bodies with a flange focal distance greater than that of M42, most notably Nikon, two options are available. A simple mechanical adaptor allows the lens to be mounted, but the effect is similar to the introduction of an extension tube, reducing the minimum focus distance at the expense of losing infinity focus. Alternatively, an adaptor with an optical element can be used to retain the original focus range of the lens, at the expense of some image quality.

The level of functionality available from a modern body when an M42 lens is mounted may vary. Some bodies may be operated in aperture-priority mode, others will only allow full manual control in this circumstance. Focus confirmation may not be available.

Mounting an M42 lens on a digital SLR with a sensor smaller than 35 mm film results in FOV crop.

Specifications

* Thread: M42 × 1
* Flange focal distance: 45.5 mm

References

External links

* [http://m42.povlab.org/index.php M42 Lens Information]
* [http://www.aohc.it/ Asahi Optical Historical Club]
* [http://www.praktica-collector.de/SLR_all.htm Praktica-Collector.de]
* [http://tech.groups.yahoo.com/group/ClubM42/ Discussion group dedicated to M42 lens mount]
* [http://www.mflenses.com Manual Focus Lenses]
* [http://www.flickr.com/groups/98706667@N00/ M42 group in Flickr]
* [http://www.flickr.com/groups/m42_lenses_and_dslrs/ M42 on DSLR group in Flickr]
* [http://www.zenitcamera.com/qa/qa-gost10332-72.html Standard: GOST 10332-72 (in Russian)]


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Lens mount — A lens mount is an interface mechanical and often also electrical between a photographic camera body and a lens. It is confined to cameras where the body allows interchangeable lenses, most usually the single lens reflex type or any movie camera… …   Wikipedia

  • Canon EF lens mount — The EF lens mount allows all the Canon EF lenses to be used on any of the Canon EOS line of cameras made by Canon Inc.Unlike the EF s breech lock predecessor, the FD mount, the EF mount uses a bayonet style mount. EF stands for Electro Focus :… …   Wikipedia

  • M42 — or M 42 may refer to:In science: * Messier 42 (M42), a nebula also called the Orion Nebula * The 42nd known Mersenne primeIn transportation: * M 42 (Michigan highway), a state highway in Michigan * M42 motorway, a motorway in the United Kingdom * …   Wikipedia

  • History of the single-lens reflex camera — The history of the single lens reflex camera predates the invention of photography in 1826/27 by one and a half centuries with the use of a reflex mirror in a camera obscura first described in 1676. Such SLR devices were popular as drawing aids… …   Wikipedia

  • T-mount — is a standard lens mount for cameras and other optical assemblies. It is a screw mount using a male M42x0.75 metric thread on the lens with a flange focal distance of 55 mm, and a mating female thread on a camera adapter or other optical… …   Wikipedia

  • Photographic lens — A photographic lens (also known as objective lens or photographic objective) is an optical lens or assembly of lenses used in conjunction with a camera body and mechanism to make images of objects either on photographic film or on other media… …   Wikipedia

  • Samsung NX mount — The Samsung NX mount is the lens mount used on NX series mirrorless interchangeable lens cameras by Samsung. The mount was first implemented in the Samsung NX10, and Samsung initially referred to the NX line as hybrid digital cameras , citing… …   Wikipedia

  • Helios (lens brand) — Helios was a brand of lens, made in the USSR, supplied with Zenit cameras, often usable with other M42 lens mount cameras …   Wikipedia

  • Pentax K mount — The Pentax K mount, sometimes referred to as the PK mount , is a lens mount standard for mounting interchangeable photographic lenses to 35 mm single lens reflex (SLR) cameras. It was created by Pentax in 1975, [cite web | url =… …   Wikipedia

  • Mirrorless interchangeable-lens camera — MILCs feature a large sensor in a small body (Olympus PEN E P2) A mirrorless interchangeable lens camera (MILC) is an emerging class of digital system cameras, intermediate between compact digital cameras and digital single lens reflex cameras… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”