List of coating techniques


List of coating techniques

This list contains an overview of coating techniques for thin-film deposition, found in the field of materials science. The techniques can be classified as follows:

Chemical vapor deposition (CVD)

* Metalorganic vapour phase epitaxy
* Electrostatic Spray Assisted Vapour Deposition (ESAVD)

Physical vapor deposition (PVD)

* arc-PVD
* Cathodic Arc Deposition
* Electron beam physical vapor deposition (EBPVD)
* Ion plating
* Ion beam assisted deposition (IBAD)
* Magnetron sputtering
* Pulsed laser deposition
* Sputter deposition
* Vacuum evaporation, Evaporation (deposition)

Chemical and electrochemical techniques

*Anodising
*Electroplating
*Plasma electrolytic oxidation
*Sol-gel

praying

* High velocity oxygen fuel (HVOF)
* Plasma spraying
* Thermal spraying

Other

* Epitaxy (Vapor-phase, Liquid-phase)
* Enamel
* Molecular beam epitaxy
* Spin coating

Safety in Metal Spraying

Metal spraying need not be a dangerous process, if the equipment is treated with care, and correct spraying practices are followed. As with any industrial process, there are a number of hazards, of which the operator should be aware, and against which specific precautions should be taken.

Ideally, equipment should be operated automatically, in enclosures specially designed to extract fumes, reduce noise levels, and present direct viewing of the spraying head. Such techniques will also produce coatings that are more consistent. There are occasions when the type of components being treated, or their low production levels, require manual equipment operation. Under these conditions, a number of hazards, peculiar to thermal spraying, are experienced, in addition to those commonly encountered in production or processing industries.

NOISE

Metal spraying equipment uses compressed gases, which create noise. Sound levels vary with the type of spraying equipment, the material being sprayed, and the operating parameters. Typical sound pressure levels taken 1 meter behind the arc.

LIGHT

Combustion spraying equipment produces an intense flame, which may have a peak temperature more than 3,100°C, and is very bright. Electric arc spraying produces ultra-violet light, which may damage delicate body tissues. Spray booths, and enclosures, should be fitted with ultra-violet absorbent dark glass. Where this is not possible, operators, and others in the vicinity, should wear protective goggles containing BS grade 6 green glass. Opaque screens should be placed around spraying areas. The nozzle of an arc pistol should never be viewed directly, unless it is certain that no power is available to the equipment.

DUST AND FUMES

The atomization of molten materials, produces a certain amount of dust and fumes. Proper extraction facilities are vital, not only for personal safety, but to minimize entrapment of re-frozen particles in the sprayed coatings. The use of breathing masks, fitted with suitable filters, is strongly recommended, where equipment cannot be isolated. Certain materials offer specific known hazards.

1. Finely divided metal particles are potentially pyrophorric and none should be allowed to accumulate.

2. Certain materials e.g. aluminum, zinc and other base metals may react with water to evolve hydrogen. This is potentially explosive and special precautions are necessary in fume extraction equipment.

3. Fumes of certain materials, notably zinc and copper alloys are unpleasant to smell, and, in certain individuals, may cause a fever-type reaction. This may occur some time after spraying and usually subsides rapidly. If it does not, medical advice must be sought.

HEAT

Combustion spraying guns use oxygen and fuel gases. The fuel gases are potentially explosive. In particular, acetylene may only be used under approved conditions. Oxygen, while not explosive, will sustain combustion, and many materials will spontaneously ignite, if excessive oxygen levels are present. Care must be taken to avoid leakage, and to isolate oxygen and fuel gas supplies, when not in use.

ELECTRICITY

Electric arc guns operate at low voltages (below 45 dc), but at relatively high currents. They may be safely hand-held. The power supply units are connected to 440 volt AC sources, and must be treated with caution.

COMPRESSED AIR

The air supply, to spray guns, is at high pressure. It should not be directed towards people. The motor air supply is lubricated, and should never be fitted to a breathing apparatus. Any breathing equipment, used with the thermal spraying process, must be supplied with air of breathing quality.

ource

* "Titanium and titanium alloys", edited by C. Leyens and M. Peters, Wiley-VCH, ISBN 3-527-30534-3, table 6.2: "overview of several coating systems and fabriction processes for titanium alloys and titanium aluminides" (amended)


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • List of nanotechnology applications — Part of a series of articles on Nanotechnology …   Wikipedia

  • List of Street Fighter characters — Characters including Ryu, Akuma, and M. Bison in the cover of Super Street Fighter IV Arcade Edition This is a list of characters from the Street Fighter fighting game series. This list covers the original Street Fighter, the Street Fighter II… …   Wikipedia

  • List of pottery terms — Historically the production of pottery has been a characteristic of human activity in most areas of the world. Over time, each culture has established terms which define tools, ingredients and production techniques. Terms currently in use may be… …   Wikipedia

  • List of Sony cyber-shot cameras — This list is incomplete; you can help by expanding it. Sony Cyber shot DSC F1, the first camera of the series, released in 1996. This is a list of Sony Cyber shot digital cam …   Wikipedia

  • List of minor One Piece characters — The following is a list of minor characters in the manga and anime series One Piece : AisaAisa (アイサ) is a small girl and, since she was born, she could sense via Mantra whenever anyone dies or is severely wounded. Because of this, she hates it… …   Wikipedia

  • List of Superior Defender Gundam Force characters — This is a list of fictional characters from Superior Defender Gundam Force . Neotopia Neotopia, as its name implies, is a utopian city seemingly existing in Earth s future. Humanity and robots (designated Mobile Citizens) live together in harmony …   Wikipedia

  • List of British ordnance terms — This article explains terms used to describe the British Armed Forces ordnance (i.e.: weapons and ammunition) used in World War I and World War II. Note that the terms may have slightly different meanings in the military of other countries.BDBD… …   Wikipedia

  • Conformal coating — material is applied to electronic circuitry to act as protection against moisture, dust, chemicals, and temperature extremes that, if uncoated (non protected), could result in damage or failure of the electronics to function. When electronics… …   Wikipedia

  • Thin-film deposition — is any technique for depositing a thin film of material onto a substrate or onto previously deposited layers. Thin is a relative term, but most deposition techniques allow layer thickness to be controlled within a few tens of nanometers, and some …   Wikipedia

  • Substrate (materials science) — Substrate is a term used in materials science to describe the base material on which processing is conducted to produce new film or layers of material such as deposited coatings. A typical substrate might be a metal, onto which a coating might be …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.