- Tetrahydrofuran
-
"THF" redirects here. For other uses, see THF (disambiguation).
Tetrahydrofuran OxolaneOther namesTHF, tetrahydrofuran, 1,4-epoxybutane, butylene oxide, cyclotetramethylene oxide, oxacyclopentane, diethylene oxide, furanidine, hydrofuran, tetra-methylene oxideIdentifiers CAS number 109-99-9 PubChem 8028 ChemSpider 7737 ChEBI CHEBI:26911 ChEMBL CHEMBL276521 RTECS number LU5950000 Jmol-3D images Image 1 - C1CCOC1
Properties Molecular formula C4H8O Molar mass 72.11 g mol−1 Appearance colorless liquid Density 0.8892 g/cm3 @ 20 °C, liquid Melting point −108.4 °C, 165 K, -163 °F
Boiling point 66 °C, 339 K, 151 °F
Solubility in water Miscible Viscosity 0.48 cP at 25 °C Structure Molecular shape envelope Dipole moment 1.63 D (gas) Hazards MSDS External MSDS EU classification Flammable (F)
Irritant (Xi)R-phrases R11, R19, R36/37 S-phrases S16, S29, S33 NFPA 704 Flash point −14 °C Related compounds Related heterocycles Furan
Pyrrolidine
DioxaneRelated compounds Diethyl ether Supplementary data page Structure and
propertiesn, εr, etc. Thermodynamic
dataPhase behaviour
Solid, liquid, gasSpectral data UV, IR, NMR, MS (verify) (what is: / ?)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)Infobox references Tetrahydrofuran (THF) is a colorless, water-miscible organic liquid with low viscosity at standard temperature and pressure. This heterocyclic compound has the chemical formula (CH2)4O. As one of the most polar ethers with a wide liquid range, it is a useful solvent. Its main use, however, is as a precursor to polymers. THF has an odor similar to its chemical cousin, diethyl ether, but is a much less potent anesthetic than diethyl ether.
Contents
Production
About two hundred thousand tonnes of tetrahydrofuran are produced annually.[1] The most widely used industrial process involves the acid-catalyzed dehydration of 1,4-butanediol, akin to the production of diethyl ether from ethanol. The butanediol is derived from carbonylation of acetylene followed by hydrogenation. Du Pont developed a process for producing THF by oxidizing n-butane to crude maleic anhydride followed by catalytic hydrogenation.[2] A third major industrial route entails hydroformylation of allyl alcohol followed by hydrogenation to the butanediol.
THF can also be synthesized by catalytic hydrogenation of furan.[3][4] Where furan is derived from pentose, this method can involve renewable resources. Nevertheless, this route is not widely practiced.
Applications
THF can be polymerized by strong acids to give a linear polymer called poly(tetramethylene ether) glycol (PTMEG), CAS Registry Number [25190-06-1], also known as PTMO, polytetramethylene oxide. The primary use of this polymer is to make elastomeric polyurethane fibers like Spandex.[5]
As a solvent
The other main application of THF is as an industrial solvent for PVC and in varnishes.[6] It is an aprotic solvent with a dielectric constant of 7.6. It is a moderately polar solvent and can dissolve a wide range of nonpolar and polar chemical compounds.[7] THF is water-miscible, and can form solid clathrate hydrate structures with water at low temperatures.[8]
Laboratory use
Although a minor application, THF is a popular solvent in the laboratory when a moderately higher-boiling ethereal solvent is required and its water miscibility is not an issue. The oxygen center of ethers can coordinate to Lewis acids such as Li+, Mg2+, and boranes, forming adducts. Hence, like diethyl ether, THF can be used in hydroboration reactions to synthesize primary alcohols, and as a solvent for organometallic compounds such as organolithium and Grignard reagents.[9] Although similar to diethyl ether, THF is a stronger base.[10] Thus, while diethyl ether remains the solvent of choice for some reactions (e.g., Grignard reactions), THF fills that role in many others where strong coordination is desirable, and the precise properties of ethereal solvents such as these (alone and in mixtures and at various temperatures) allows for fine-tuning modern chemical reactions.
THF is often used in polymer science. For example, it can be used to dissolve polymers prior to determining its molecular mass using gel permeation chromatography. THF dissolves PVC as well and is the main ingredient in PVC adhesives. It can be used to liquefy old PVC cement, and is often used industrially to degrease metal parts.
2-MethylTHF
2-Methyltetrahydrofuran (2MeTHF) is a THF alternative that is being promoted as being more ecologically friendly.[11] Whereas 2-MeTHF is more expensive, it may provide for greater overall process economy. 2MeTHF has solvating properties that are intermediate between diethyl ether and THF, has limited water-miscibility, and forms an azeotrope with water on distillation. Its lower melting point makes it useful for lower temperature reactions, and its higher boiling point allows procedures under reflux at higher temperatures (relative to THF).
Precautions
THF is considered a relatively nontoxic solvent, with the median lethal dose (LD50) comparable to that for acetone. Reflecting its remarkable solvent properties, it penetrates the skin causing rapid dehydration. THF readily dissolves latex and is typically handled with nitrile or neoprene rubber gloves. It is highly flammable.
The greatest danger posed by THF follows from its tendency to form highly-explosive peroxides on storage in air. To minimize this problem, commercial samples of THF are often inhibited with BHT. THF should not be distilled to dryness, because the explosive peroxides concentrate in the residue.
See also
- Monomer
- Polytetrahydrofuran
- Trapp mixture
References
- ^ "Ethers, by Lawrence Karas and W. J. Piel". Kirk‑Othmer Encyclopedia of Chemical Technology. John Wiley & Sons, Inc. 2004.
- ^ Merck Index of Chemicals and Drugs, 9th ed.
- ^ Morrison, Robert Thornton; Boyd, Robert Neilson: Organic Chemistry, 2nd ed., Allyn and Bacon 1972, p. 569
- ^ Donald Starr and R. M. Hixon (1943), "Tetrahydrofuran", Org. Synth., http://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=cv2p0566; Coll. Vol. 2: 566
- ^ "Polyethers, Tetrahydrofuran and Oxetane Polymers by Gerfried Pruckmayr, P. Dreyfuss, M. P. Dreyfuss". Kirk‑Othmer Encyclopedia of Chemical Technology. John Wiley & Sons, Inc. 1996.
- ^ Herbert Müller, "Tetrahydrofuran" in Ullmann's Encyclopedia of Industrial Chemistry 2002, Wiley-VCH, Weinheim. doi:10.1002/14356007.a26_221
- ^ "Chemical Reactivity". Cem.msu.edu. http://www.cem.msu.edu/~reusch/VirtualText/enrgtop.htm#top4. Retrieved 2010-02-15.
- ^ "FileAve.com". Gashydrate.fileave.com. http://gashydrate.fileave.com/NMR-MRI%20study%20of%20clathrate%20hydrate%20mechanisms.pdf. Retrieved 2010-02-15.
- ^ Elschenbroich, C.; Salzer, A. ”Organometallics : A Concise Introduction” (2nd Ed) (1992) Wiley-VCH: Weinheim. ISBN 3-527-28165-7
- ^ E.g., B.L. Lucht, D.B. Collum "Lithium Hexamethyldisilazide: A View of Lithium Ion Solvation through a Glass-Bottom Boat" Accounts of Chemical Research, 1999, volume 32, 1035–1042 doi:10.1021/ar960300e, and references therein.
- ^ "Greener Solvent Alternatives - Brochure" (PDF). http://www.sigmaaldrich.com/etc/medialib/docs/Sigma/Brochure/greener_solvent_alternatives.Par.0001.File.tmp/greener_solvent_alternatives.pdf. Retrieved 2010-02-15.
General reference
- Loudon, G. Mark. Organic Chemistry 4th ed. New York: Oxford University Press. 2002. pg 318
External links
- International Chemical Safety Card 0578
- NIOSH Pocket Guide to Chemical Hazards
- THF usage
- U.S. OSHA info on THF
- "2-Methyltetrahydrofuran, An alternative to Tetrahydrofuran and Dichloromethane". Sigma-Aldrich. http://www.sigmaaldrich.com/Area_of_Interest/Research_Essentials/Solvents/Key_Resources/Me_THF.html. Retrieved 2007-05-23.
Categories:- Ether solvents
- Tetrahydrofurans
Wikimedia Foundation. 2010.