SOCKS

SOCKS

SOCKS is an Internet protocol that allows client-server applications to transparently use the services of a network firewall. SOCKS is an abbreviation for "SOCKetS" [ [http://www.hummingbird.com/products/nc/socks/faq.html#stand Hummingbird SOCKS FAQ] ] .

Clients behind a firewall, needing to access exterior servers, may connect to a SOCKS proxy server instead. Such a proxy server controls the eligibility of the client to access the external server and passes the request on to the server. SOCKS can also be used in the opposite way, allowing the clients outside the firewall ("exterior clients") to connect to servers inside the firewall (internal servers).

The protocol was originally developed by David Koblas, a system administrator of MIPS Computer Systems. After MIPS was taken over by Silicon Graphics in 1992, Koblas presented a paper on SOCKS at that year's Usenix Security Symposium and SOCKS became publicly available. [Darmohray, Tina. " [http://www.usenix.org/publications/login/2005-02/pdfs/firewalls.pdf Firewalls and fairy tales] ". ;LOGIN:. Vol 30, no. 1.] The protocol was extended to version 4 by Ying-Da Lee of NEC.

The SOCKS reference architecture and client are owned by Permeo Technologies. [http://www.socks.permeo.com/ (broken link as of July 2008)] (Note that Permeo Technologies has been bought out by Blue Coat Systems [ [http://www.bluecoat.com/news/releases/2006/010306_permeo.html News Release from Bluecoat] ] a spin-off from NEC. [ [http://www.infosecurityproductsguide.com/hot2006/PermeoTechnologies.html Article from] infosecurityproductsguide.com] )

SOCKS performs at Layer 5 of the OSI model - the Session Layer (an intermediate layer between the presentation layer and the transport layer).

SOCKS 4 protocol

A typical SOCKS 4 connection request looks like this (each number is one byte):

Client to SOCKS Server:

* field 1: SOCKS version number, 1 byte, must be 0x04 for this version
* field 2: command code, 1 byte:
** 0x01 = establish a TCP/IP stream connection
** 0x02 = establish a TCP/IP port binding
* field 3: network byte order port number, 2 bytes
* field 4: network byte order IP address, 4 bytes
* field 5: the user ID string, variable length, terminated with a null (0x00)

Server to SOCKS client:

* field 1: null byte
* field 2: status, 1 byte:
** 0x5a = request granted
** 0x5b = request rejected or failed
** 0x5c = request failed because client is not running identd (or not reachable from the server)
** 0x5d = request failed because client's identd could not confirm the user ID string in the request
* field 3: 2 arbitrary bytes, that should be ignored
* field 4: 4 arbitrary bytes, that should be ignored

Example:

This is a SOCKS 4 request to connect Fred to 66.102.7.99:80, the server replies with an "OK".

* Client: 0x04 | 0x01 | 0x00 0x50 | 0x42 0x66 0x07 0x63 | 0x46 0x72 0x65 0x64 0x00
** The last field is 'Fred' in ASCII, followed by a null byte.
* Server: 0x00 | 0x5a | 0xXX 0xXX | 0xXX 0xXX 0xXX 0xXX
** 0xXX can be any byte value. The Socks 4 protocol specifies the values of these bytes should be ignored.

From this point on any data sent from the SOCKS client to the SOCKS server will be relayed to 66.102.7.99 and vice versa.

The command field can be 0x01 for "connect" or 0x02 for "bind". "bind" allows incoming connections for protocols like active FTP.

SOCKS 4a protocol

SOCKS 4a is a simple extension to SOCKS 4 protocol that allows a client that cannot resolve the destination host's domain name to specify it.

The client should set the first three bytes of DSTIP to NULL and the last byte to a non-zero value (This corresponds to IP address 0.0.0.x, with x nonzero, an inadmissible destination address and thus should never occur if the client can resolve the domain name). Following the NULL byte terminating USERID, the client must send the destination domain name and terminate it with another NULL byte. This is used for both "connect" and "bind" requests.

Client to Socks Server:

* field 1: SOCKS version number, 1 byte, must be 0x04 for this version
* field 2: command code, 1 byte:
** 0x01 = establish a TCP/IP stream connection
** 0x02 = establish a TCP/IP port binding
* field 3: network byte order port number, 2 bytes
* field 4: deliberate invalid IP address, 4 bytes, first three must be 0x00 and the last one must not be 0x00
* field 5: the user ID string, variable length, terminated with a null (0x00)
* field 6: the domain name of the host we want to contact, variable length, terminated with a null (0x00)

Server to SOCKS client:

* field 1: null byte
* field 2: status, 1 byte:
** 0x5a = request granted
** 0x5b = request rejected or failed
** 0x5c = request failed because client is not running identd (or not reachable from the server)
** 0x5d = request failed because client's identd could not confirm the user ID string in the request
* field 3: network byte order port number, 2 bytes
* field 4: network byte order IP address, 4 bytes

A server using protocol 4A must check the DSTIP in the request packet. If it represents address 0.0.0.x with nonzero x, the server must read in the domain name that the client sends in the packet. The server should resolve the domain name and make connection to the destination host if it can.

SOCKS 5 protocol

The SOCKS 5 protocol, an extension of the SOCKS 4 protocol that offers more choices of authentication, is defined in [http://www.rfc-editor.org/rfc/rfc1928.txt RFC 1928] . The initial handshake now consists of the following:
* Client connects and sends a greeting which includes a list of authentication methods supported.
* Server chooses one (or sends a failure response if none of the offered methods are acceptable).
* Several messages may now pass between the client and the server depending on the authentication method chosen.
* Client sends a connection request similar to SOCKS 4.
* Server responds similar to SOCKS 4.

The authentication methods supported are numbered as follows:

* 0x00 - No authentication
* 0x01 - GSSAPI [ [http://tools.ietf.org/html/rfc1961 RFC 1961] ]
* 0x02 - Username/Password [ [http://tools.ietf.org/html/rfc1929 RFC 1929] ]
* 0x03-0x7F - methods assigned by IANA [http://www.iana.org/assignments/socks-methods]
* 0x80-0xFE - methods reserved for private use

The initial greeting from the client is:

* field 1: SOCKS version number (must be 0x05 for this version)
* field 2: number of authentication methods supported, 1 byte
* field 3: authentication methods, variable length, 1 byte per method supported

The server's choice is communicated:

* field 1: SOCKS version, 1 byte (0x05 for this version)
* field 2: chosen authentication method, 1 byte, or 0xFF if no acceptable methods were offered

The subsequent authentication is method-dependent and described in [http://tools.ietf.org/html/rfc1929 RFC 1929] :

The client's authentication request is:
* field 1: version number, 1 byte (must be 0x01)
* field 2: username length, 1 byte
* field 3: username
* field 4: password length, 1 byte
* field 5: password

Server response for authentication:
* field 1: version, 1 byte
* field 2: status code, 1 byte.
** 0x00 = success
** any other value = failure, connection must be closed

The client's connection request is:

* field 1: SOCKS version number, 1 byte (must be 0x05 for this version)
* field 2: command code, 1 byte:
** 0x01 = establish a TCP/IP stream connection
** 0x02 = establish a TCP/IP port binding
** 0x03 = associate a UDP port
* field 3: reserved, must be 0x00
* field 4: address type, 1 byte:
** 0x01 = IPv4 address
** 0x03 = Domain name
** 0x04 = IPv6 address
* field 5: destination address of
** 4 bytes for IPv4 address
** 1 byte of name length followed by the name for Domain name
** 16 bytes for IPv6 address
* field 6: port number in a network byte order, 2 bytes

Server response:

* field 1: SOCKS protocol version, 1 byte (0x05 for this version)
* field 2: status, 1 byte:
** 0x00 = request granted
** 0x01 = general failure
** 0x02 = connection not allowed by ruleset
** 0x03 = network unreachable
** 0x04 = host unreachable
** 0x05 = connection refused by destination host
** 0x06 = TTL expired
** 0x07 = command not supported / protocol error
** 0x08 = address type not supported
* field 3: reserved, must be 0x00
* field 4: address type, 1 byte:
** 0x01 = IPv4 address
** 0x03 = Domain name
** 0x04 = IPv6 address
* field 5: destination address of
** 4 bytes for IPv4 address
** 1 byte of name length followed by the name for Domain name
** 16 bytes for IPv6 address
* field 6: network byte order port number, 2 bytes

There are client programs that "socksify" [http://mindprod.com/jgloss/socksify.html] , which allows adaptation of any networked software to connect to external networks via SOCKS.

OCKS software

* [http://ksb.sourceforge.net Kernel SOCKS Bouncer] ksb26 (Kernel Socks Bouncer) is a Linux Kernel 2.6.x Loadable Kernel Module that redirects TCP connection (to user-defined target hosts) through socks 4/5 chains.
* [http://ss5.sourceforge.net/ SS5 Socks Server] is an open-source SOCKS4/SOCKS5 server.
* [http://www.inet.no/dante/ Dante] is an open-source SOCKS4/SOCKS5 implementation with commercial support developed by [http://www.inet.no/english/index.html Inferno Nettverk A/S] .
* OpenSSH supports sending SOCKS requests over an SSH tunnel to a remote server.
* WinSocks is a light-weight SOCKS4/SOCKS5 server developed by [http://www.proxylabs.com/ Proxy Labs] .
* [http://www.dest-unreach.org/socat/ SOcat] Multipurpose relay (SOcket CAT): includes socks4, and socks4a functionality (Linux / Mac)
* [http://www.freecap.ru/eng/ FreeCap] Socksifyer for Windows, any App can run its network traffic transparently via a SOCKS or HTTP proxy.
* [http://sourceforge.net/projects/ssspl Simple Socks Server for Perl] - SSS is a Simple SOCKS Server written in perl that implements the SOCKS v5 protocol.

References

External links

* [http://www.tools.ietf.org/html/draft-ietf-aft-socks-chap draft-ietf-aft-socks-chap] Challenge-Handshake Authentication Protocol for SOCKS V5
* RFC 3089 - A SOCKS-based IPv6/IPv4 Gateway Mechanism
* RFC 1961 - GSS-API Authentication Method for SOCKS Version 5
* RFC 1929 - Username/Password Authentication for SOCKS V5
* RFC 1928 - SOCKS Protocol Version 5
* [http://ftp.icm.edu.pl/packages/socks/socks4/SOCKS4.protocol SOCKS: A protocol for TCP proxy across firewalls] - SOCKS Protocol Version 4 (NEC)


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • SOCKS — Saltar a navegación, búsqueda SOCKS es un protocolo de Internet que permite a las aplicaciones Cliente servidor usar de manera transparente los servicios de un firewall de red. SOCKS es una abreviación de SOCKetS [1]. Los clientes que hay detrás… …   Wikipedia Español

  • SOCKS — сетевой протокол, который позволяет клиент серверным приложениям прозрачно использовать сервисы за межсетевыми экранами (фаерволами). SOCKS это сокращение от «SOCKet Secure». Содержание 1 Введение 2 Протокол SOCKS 4 3 Проток …   Википедия

  • Socks — сетевой протокол, который позволяет клиент серверным приложениям прозрачно использовать сервисы за межсетевыми экранами (фаерволами). SOCKS это сокращение от «SOCKetS» (сокеты, гнёзда). Клиенты за межсетевым экраном, нуждающиеся в доступе к… …   Википедия

  • Socks — im Briefing Room des Weißen Hauses Betty Currie und Socks …   Deutsch Wikipedia

  • Socks — sobre el pupitre de la Sala de Prensa de la Casa Blanca. Socks (en español: Calcetines, marzo de 1989 20 de febrero de 2009) fue el gato de la familia del Presidente de los Estados Unidos Bill Clinton durante su presidencia. Fue la única mascota… …   Wikipedia Español

  • SOCKS —   [Abk. für Socket Secure Server], ein spezielles Proxy Protokoll, das einem Rechner im »internen Netzwerk« den Zugriff auf Ressourcen im »externen Netzwerk« (z. B. über Internet bzw. TCP/IP Dienste wie ftp, Telnet oder WWW) ermöglicht, ohne dass …   Universal-Lexikon

  • SOCKS — Pour les articles homonymes, voir Socks (homonymie). Pile de protocoles 7.  Application 6.  …   Wikipédia en Français

  • Socks — Pour les articles homonymes, voir Socks (homonymie). Socks sur le pupitre de la Salle de presse de la Maison Blanche. Socks (mars 1989 20 février …   Wikipédia en Français

  • SOCKS — Das SOCKS Protokoll ist ein Internet Protokoll, das Client Server Anwendungen erlaubt, protokollunabhängig und transparent die Dienste eines Proxyservers zu nutzen. SOCKS ist eine Abkürzung für „SOCKetS“. Clients hinter einer Firewall, die eine… …   Deutsch Wikipedia

  • SOCKS —    A proxy protocol that provides a secure channel between two TCP/IP (Transmission Control Protocol/Internet Protocol) systems, usually a Web browser running on an internal corporate intranet and a Web server on the Internet.    SOCKS provides… …   Dictionary of networking

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”