Modular origami

Modular origami
A stellated icosahedron made from custom papers

Modular origami, or unit origami, is a paperfolding technique which uses multiple sheets of paper to create a larger and more complex structure than would be possible using single-piece origami techniques. Each individual sheet of paper is folded into a module, or unit, and then modules are assembled into an integrated flat shape or three-dimensional structure by inserting flaps into pockets created by the folding process. These insertions create tension or friction that holds the model together.

Contents

Definition and restrictions

Examples of modular origami made up of Sonobe units

Modular origami can be classified as a sub-set of multi-piece origami, since the rule of restriction to one sheet of paper is abandoned. However, all the other rules of origami still apply, so the use of glue, thread, or any other fastening that is not a part of the sheet of paper is not generally acceptable in modular origami.

The additional restrictions that distinguish modular origami from other forms of multi-piece origami are using many identical copies of any folded unit, and linking them together in a symmetrical or repeating fashion to complete the model. There is a common misconception that treats all multi-piece origami as modular, but this is not the case.

More than one type of module can still be used. Typically this means using separate linking units hidden from sight to hold parts of the construction together. Any other usage is generally frowned upon.

The word origami comes from Japan. "Oru" meaning to fold and "Kami" meaning paper

History

A kusudama, the traditional Japanese precursor to modular origami

The first historical evidence for a modular origami design comes from a Japanese book by Hayato Ohoka published in 1734 called Ranma Zushiki. It contains a print that shows a group of traditional origami models, one of which is a modular cube. The cube is pictured twice (from slightly different angles) and is identified in the accompanying text as a tamatebako, or a 'magic treasure chest'.

Isao Honda's World of Origami (Japan Publications ISBN 0-87040-383-4 published in 1965) appears to have the same model, where it is called the 'Cubical Box'. The six modules required for this design were developed from the traditional Japanese paperfold commonly known as the Menko. Each module forms one face of the finished cube.

There are several other traditional Japanese modular origami designs, including balls of folded paper flowers known as kusudama, or medicine balls. These designs are not integrated and are commonly strung together with thread. The term kusudama is sometimes, rather inaccurately, used to describe any three-dimensional modular origami structure resembling a ball.

There are also a few modular designs in the Chinese paperfolding tradition, notably the Pagoda (from Maying Soong) and the Lotus made from Joss paper.

Most traditional designs are however single-piece and the possibilities inherent in the modular origami idea were not explored further until the 1960s when the technique was re-invented by Robert Neale in the USA and later by Mitsonobu Sonobe in Japan. Since then the modular origami technique has been popularized and developed extensively, and now there have been thousands of designs developed in this repertoire.

Types of modular origami

Modular origami forms may be flat or three-dimensional. Flat forms are usually polygons (sometimes known as coasters), stars, rotors, and rings. Three-dimensional forms tend to be regular polyhedra or tessellations of simple polyhedra.

There are some modular origami that are approximations of fractals, such as Menger's sponge. Macro-modular origami is a form of modular origami in which finished assemblies are themselves used as the building blocks to create larger integrated structures. Such structures are described in Tomoko Fuse's book Unit Origami-Multidimensional Transformations (Japan Publications ISBN 0-87040-852-6 published in 1990)

Notable modular paperfolders

Robert Neale's Penultimate Module

Robert Neale developed a system to model equilateral polyhedra based on a module with variable vertex angles. Each module has two pockets and two tabs, on opposite sides. The angle of each tab can be changed independently of the other tab. Each pocket can receive tabs of any angle. The most common angles form polygonal faces:

Each module joins others at the vertices of a polyhedron to form a polygonal face. the tabs form angles on opposite sides of an edge. For example, a subassembly of three triangle corners forms a triangle, the most stable configuration. As the internal angle increases for squares, penatagons and so forth, the stability decreases.

Many polyhedra call for unalike adjacent polygons. for example, a pyramid has one square face and three triangular faces. This requires hybrid modules, or modules having different angles. A pyramid consists of eight modules, four modules as square-triangle, and four as triangle-triangle.

Further polygonal faces are possible by altering the angle at each corner. The Neale modules can form any equilateral polyhedron including those having rhombic faces, like the rhombic dodecahedron.

Mukhopadhyay module

The Mukhopadhyay module can form any equilateral polyhedron. Each unit has a middle crease that forms an edge, and triangular wings that form adjacent stellated faces. For example, a cuboctahedral assembly has 24 units, since the cuboctahedron has 24 edges. Additionally, bipyramids are possible, by folding the central crease on each module outwards or convexly instead of inwards or concavely as for the icosahedron and other stellated polyhedra. The Mukhopadhyay module works best when glued together, especially for polyhedra having larger numbers of sides.

Further reading

  • Tomoko Fuse (1990). Unit Origami: Multidimensional Transformations. Japan Publications. ISBN 0870408526. 

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Origami — Paper folding redirects here. For other uses, see Paper folding (disambiguation). For other uses of Origami, see Origami (disambiguation). Origami cranes The foldin …   Wikipedia

  • Origami techniques — This page shows basic information about the most commonly used techniques in the Japanese art of origami. Origami symbols*Turn over. *Rotate. *Unfold. *Valley Fold. *Mountain fold. *Inflate. *Reverse Fold. *Sink Fold. *Repeat Behind.Basic… …   Wikipedia

  • Origami — Se ha sugerido que este artículo o sección sea fusionado con papiroflexia (discusión). Una vez que hayas realizado la fusión de artículos, pide la fusión de historiales aquí …   Wikipedia Español

  • History of origami — The History of Origami followed after the invention of paper by Cai Lun in the Eastern Han Dynasty in China. Origins and traditional designsThe origin of the art began as Chinese Paper Folding. The Japanese origin began in the 6th century when… …   Wikipedia

  • Chinese paper folding — The Gold sycee is conceptually Chinese. Chinese Paper Folding, or Zhezhi (Chinese: 中國摺紙; pinyin: zhé zhǐ), is the art of paper folding that originated in China. The work of Akira Yoshizawa widely popularized the Japanese name origami however, in… …   Wikipedia

  • Kusudama — The Japanese kusudama (薬玉; lit. medicine ball) is a paper model that is usually (although not always) created by sewing multiple identical pyramidal units (usually stylized flowers folded from square paper) together through their points to form a …   Wikipedia

  • Tomoko Fuse — and is by many considered to be the master of unit origami and one of the pre eminent living Japanese Origami Masters. She has designed many modular boxes and containers, kusudama, paper toys, masks, and modular polyhedra and other geometric… …   Wikipedia

  • Yoshizawa-Randlett system — The origami crane diagram, using the Yoshizawa Randlett system The Yoshizawa Randlett system is a diagramming system used to describe the folds of origami models. Many origami books begin with a description of basic origami techniques which are… …   Wikipedia

  • Kunihiko Kasahara — (笠原邦彦 Kasahara Kunihiko ; born in 1941) is a Japanese origami master. He has made hundreds of models, from simple lion masks to complex modular origami, such as a small stellated dodecahedron. He does not specialize in what is known as super… …   Wikipedia

  • Sonobe — Examples of modular origami made up of Sonobe units: an augmented icosahedron and an augmented octahedron, which require 30 and 12 units, respectively. The Sonobe module is a unit used to build modular origami, created by Mitsunobu Sonobe. Each… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”