Riemann integral

Riemann integral

In the branch of mathematics known as real analysis, the Riemann integral, created by Bernhard Riemann, was the first rigorous definition of the integral of a function on an interval. While the Riemann integral is unsuitable for many theoretical purposes, it is one of the easiest integrals to define. Some of these technical deficiencies can be remedied by the Riemann-Stieltjes integral, and most of them disappear in the Lebesgue integral.

Overview

Let f(x) be a non-negative real-valued function of the interval [a,b] , and let S = { (x, y) | 0 < y < f(x) } be the region of the plane under the function f(x) and above the interval [a,b] (see the figure on the top right). We are interested in measuring the area of S. Once we have measured it, we will denote the area by:

:int_{a}^{b}f(x),dx.

The basic idea of the Riemann integral is to use very simple approximations for the area of S. By taking better and better approximations, we can say that "in the limit" we get exactly the area of S under the curve.

Note that where f can be both positive and negative, the integral corresponds to "signed area"; that is, the area above the x-axis minus the area below the x-axis.

Definition of the Riemann integral

Partitions of an interval

A partition of an interval [a,b] is a finite sequence a = x_0 < x_1 < x_2 < cdots < x_n = b. Each [x_i, x_{i+1}] is called a "subinterval" of the partition. The "mesh" of a partition is defined to be the length of the longest subinterval [x_i,x_{i+1}] , that is, it is max (x_{i+1}-x_i) where 0 le i le n - 1. It is also called the "norm" of the partition.

A "tagged partition of an interval" is a partition of an interval together with a finite sequence of numbers t_0, ldots, t_{n-1} subject to the conditions that for each i, x_i le t_i le x_{i+1}. In other words, it is a partition together with a distinguished point of every subinterval. The mesh of a tagged partition is defined the same as for an ordinary partition.

Suppose that x_0,ldots,x_n together with t_0,ldots,t_{n-1} are a tagged partition of [a, b] , and that y_0,ldots,y_m together with s_0,ldots,s_{m-1} are another tagged partition of [a,b] . We say that y_0,ldots,y_m and s_0,ldots,s_{m-1} together are a "refinement" of x_0,ldots,x_n together with t_0,ldots,t_{n-1} if for each integer i with 0 le i le n, there is an integer r(i) such that x_i = y_{r(i)} and such that t_i = s_j for some j with r(i) le j le r(i+1). Said more simply, a refinement of a tagged partition takes the starting partition and adds more tags, but does not take any away.

We can define a partial order on the set of all tagged partitions by saying that one tagged partition is bigger than another if the bigger one is a refinement of the smaller one.

Riemann sums

Choose a real-valued function f which is defined on the interval [a,b] . The "Riemann sum" of f with respect to the tagged partition x_0,ldots,x_n together with t_0,ldots,t_{n-1} is:

:sum_{i=0}^{n-1} f(t_i) (x_{i+1}-x_i)

Each term in the sum is the product of the value of the function at a given point and the length of an interval. Consequently, each term represents the area of a rectangle with height f(t_i) and length x_{i+1}-x_i. The Riemann sum is the signed area under all the rectangles.

The Riemann integral

Loosely speaking, the Riemann integral is the limit of the Riemann sums of a function as the partitions get finer and finer. However, being precise about what is meant by "finer and finer" is somewhat tricky.

One important fact is that the mesh of the partitions must become smaller and smaller, so that in the limit, it is zero. If this were not so, then we would not be getting a good approximation to the function on certain subintervals. In fact, this is enough to define an integral. To be specific, we say that the Riemann integral of f equals s if the following condition holds:

:For all epsilon > 0, there exists delta > 0 such that for any tagged partition x_0,ldots,x_n and t_0,ldots,t_{n-1} whose mesh is less than delta, we have

:left|sum_{i=0}^{n-1} f(t_i) (x_{i+1}-x_i) - s ight| < epsilon.,

However, there is an unfortunate problem with this definition: it is very difficult to work with. So we will make an alternate definition of the Riemann integral which is easier to work with, then prove that it is the same as the definition we have just made. Our new definition says that the Riemann integral of f equals s if the following condition holds:

:For all epsilon > 0, there exists a tagged partition x_0,ldots,x_n and t_0,ldots,t_{n-1} such that for any refinement y_0,ldots,y_m and s_0,ldots,s_{m-1} of x_0,ldots,x_n and t_0,ldots,t_{n-1}, we have

:left|sum_{i=0}^{m-1} f(s_i) (y_{i+1}-y_i) - s ight| < epsilon.,

Both of these mean that eventually, the Riemann sum of f with respect to any partition gets trapped close to s. Since this is true no matter how close we demand the sums be trapped, we say that the Riemann sums converge to s. These definitions are actually a special case of a more general concept, a net.

As we stated earlier, these two definitions are equivalent. In other words, s works in the first definition if and only if s works in the second definition. To show that the first definition implies the second, start with an epsilon, and choose a delta that satisfies the condition. Choose any tagged partition whose mesh is less than delta. Its Riemann sum is within epsilon of s, and any refinement of this partition will also have mesh less than delta, so the Riemann sum of the refinement will also be within epsilon of s. To show that the second definition implies the first, it is easiest to use the Darboux integral. First one shows that the second definition is equivalent to the definition of the Darboux integral; for this see the page on Darboux integration. Now we will show that a Darboux integrable function satisfies the first definition. Choose a partition x_0, ldots, x_n such that the lower and upper Darboux sums with respect to this partition are within frac{epsilon}{2} of the value s of the Darboux integral. Let r equal max_{0 le i le n-1} M_i-m_i, where M_i and m_i are the supremum and infimum, respectively, of f on [x_i,x_{i+1}] , and let delta be less than both frac{epsilon}{2rn} and min_{0 le i le n-1} x_{i+1}-x_i. Then it is not hard to see that the Riemann sum of f with respect to any tagged partition of mesh less than delta will be within frac{epsilon}{2} of the upper or lower Darboux sum, so it will be within epsilon of s.

Examples

Let f: [0,1] ightarrow mathbb{R} be the function which takes the value 1 at every point. Any Riemann sum of f on [0,1] will have the value 1, therefore the Riemann integral of f on [0,1] is 1.

Let I_{mathbb{Q: [0,1] ightarrow mathbb{R} be the indicator function of the rational numbers in [0, 1] ; that is, I_{mathbb{Q takes the value 1 on rational numbers and 0 on irrational numbers. This function does not have a Riemann integral. To prove this, we will show how to construct tagged partitions whose Riemann sums get arbitrarily close to both zero and one.

To start, let x_0, ldots, x_n and t_0, ldots, t_{n-1} be a tagged partition (each t_i is between x_i and x_{i+1}). Choose epsilon > 0. The t_i have already been chosen, and we can't change the value of f at those points. But if we cut the partition into tiny pieces around each t_i, we can minimize the effect of the t_i. Then, by carefully choosing the new tags, we can make the value of the Riemann sum turn out to be within epsilon of either zero or one&mdash;our choice!

Our first step is to cut up the partition. There are n of the t_i, and we want their total effect to be less than epsilon. If we confine each of them to an interval of length less than epsilon/n, then the contribution of each t_i to the Riemann sum will be at least (0cdotepsilon)/n and at most (1cdotepsilon)/n. This makes the total sum at least zero and at most epsilon. So let delta be a positive number less than epsilon/n. If it happens that two of the t_i are within delta of each other, choose delta smaller. If it happens that some t_i is within delta of some x_j, and t_i is not equal to x_j, choose delta smaller. Since there are only finitely many t_i and x_j, we can always choose delta sufficiently small.

Now we add two cuts to the partition for each t_i. One of the cuts will be at t_i - delta/2, and the other will be at t_i + delta/2. If one of these leaves the interval [0,1] , then we leave it out. t_i will be the tag corresponding to the subinterval [t_i - delta/2,t_i + delta/2] . If t_i is directly on top of one of the x_j, then we let t_i be the tag for both [t_i - delta/2,x_j] and [x_j,t_i + delta/2] . We still have to choose tags for the other subintervals. We will choose them in two different ways. The first way is to always choose a rational point, so that the Riemann sum is as large as possible. This will make the value of the Riemann sum at least 1-epsilon. The second way is to always choose an irrational point, so that the Riemann sum is as small as possible. This will make the value of the Riemann sum at most epsilon.

Since we started from an arbitrary partition and ended up as close as we wanted to either zero or one, it is false to say that we are eventually trapped near some number s, so this function is not Riemann integrable. However, it is Lebesgue integrable. In the Lebesgue sense its integral is zero, since the function is zero almost everywhere. But this is a fact that is beyond the reach of the Riemann integral.

Other concepts similar to the Riemann integral

It is popular to define the Riemann integral as the Darboux integral. This is because the Darboux integral is technically simpler and because a function is Riemann-integrable if and only if it is Darboux-integrable.

Some calculus books do not use general tagged partitions, but limit themselves to specific types of tagged partitions. If the type of partition is limited too much, some non-integrable functions may appear to be integrable.

One popular restriction is the use of "left-hand" and "right-hand" Riemann sums. In a left-hand Riemann sum, t_i = x_i for all i, and in a right-hand Riemann sum, t_i = x_{i+1} for all i. Alone this restriction does not impose a problem: we can refine any partition in a way that makes it a left-hand or right-hand sum by subdividing it at each t_i. In more formal language, the set of all left-hand Riemann sums and the set of all right-hand Riemann sums is cofinal in the set of all tagged partitions.

Another popular restriction is the use of regular subdivisions of an interval. For example, the n'th regular subdivision of [0, 1] consists of the intervals [0, 1/n] , [1/n, 2/n] , ldots, [(n-1)/n, 1] . Again, alone this restriction does not impose a problem, but the reasoning required to see this fact is more difficult than in the case of left-hand and right-hand Riemann sums.

However, combining these restrictions, so that one uses only left-hand or right-hand Riemann sums on regularly divided intervals, is dangerous. If a function is known in advance to be Riemann integrable, then this technique will give the correct value of the integral. But under these conditions the indicator function I_{mathbb{Q will appear to be integrable on [0, 1] with integral equal to one: Every endpoint of every subinterval will be a rational number, so the function will always be evaluated at rational numbers, and hence it will appear to always equal one. The problem with this definition becomes apparent when we try to split the integral into two pieces. The following equation ought to hold:

:int_0^{sqrt{2}-1}! I_mathbf{Q}(x) ,mathrm{d}x +int_{sqrt{2}-1}^1! I_mathbf{Q}(x) ,mathrm{d}x =int_0^1! I_mathbf{Q}(x) ,mathrm{d}x .

If we use regular subdivisions and left-hand or right-hand Riemann sums, then the two terms on the left are equal to zero, since every endpoint except 0 and 1 will be irrational, but as we have seen the term on the right will equal 1.

As defined above, the Riemann integral avoids this problem by refusing to integrate I_{mathbb{Q. The Lebesgue integral is defined in such a way that all these integrals are 0.

Facts about the Riemann integral

The Riemann integral is a linear transformation; that is, if f and g are Riemann-integrable on [a,b] and alpha and eta are constants, then

: int_{a}^{b}( alpha f + eta g),dx = alpha int_{a}^{b}f(x),dx + eta int_{a}^{b}g(x),dx.

A real-valued function f on [a,b] is Riemann-integrable if and only if it is bounded and continuous almost everywhere.

If a real-valued function on [a,b] is Riemann-integrable, it is Lebesgue-integrable.

If {f_n} is a uniformly convergent sequence on [a,b] with limit f, then

: int_{a}^{b} f, dx = int_a^b{lim_{n o infty}{f_n}, dx} = lim_{n o infty} int_{a}^{b} f_n, dx.

If a real-valued function is monotone on the interval [a,b] , it is Riemann-integrable.

Generalizations of the Riemann integral

It is easy to extend the Riemann integral to functions with values in the Euclidean vector space mathbb{R}^n for any n. The integral is defined by linearity; in other words, if mathbf{f} = (f_1, dots, f_n), then intmathbf{f} = left(int f_1,,dots, int f_n ight). In particular, since the complex numbers are a real vector space, this allows the integration of complex valued functions.

The Riemann integral is only defined on bounded intervals, and it does not extend well to unbounded intervals. The simplest possible extension is to define such an integral as a limit, in other words, as an improper integral. We could set:

:int_{-infty}^infty f(t),dt = lim_{x oinfty}int_{-x}^x f(t),dt.

Unfortunately, this does not work well. Translation invariance, the fact that the Riemann integral of the function should not change if we move the function left or right, is lost. For example, let f(x) = 1 for all x > 0, f(0)=0, and f(x) = -1 for all x < 0. Then,

:int_{-x}^x f(t),dt = int_{-x}^0 f(t),dt + int_0^x f(t),dt = -x + x = 0

for all x. But if we shift f(x) to the right by one unit to get f(x-1), we get

:int_{-x}^x f(t-1),dt = int_{-x}^1 f(t-1),dt + int_1^x f(t-1),dt = -(x+1) + (x-1) = -2

for all x > 1.

Since this is unacceptable, we could try the definition:

:int_{-infty}^infty f(t),dt = lim_{a o-infty}lim_{b oinfty}int_a^b f(t),dt.

Then if we attempt to integrate the function f above, we get +infty, because we take the limit as b tends to infty first. If we reverse the order of the limits, then we get -infty.

This is also unacceptable, so we could require that the integral exists and gives the same value regardless of the order. Even this does not give us what we want, because the Riemann integral no longer commutes with uniform limits. For example, let f_n(x) = 1/n on (0,n) and 0 everywhere else. For all n, int f_n,dx = 1. But f_n converges uniformly to zero, so the integral of lim f_n is zero. Consequently int f,dx ot= limint f_n,dx. Even though this is the correct value, it shows that the most important criterion for exchanging limits and (proper) integrals is false for improper integrals. This makes the Riemann integral unworkable in applications.

A better route is to abandon the Riemann integral for the Lebesgue integral. The definition of the Lebesgue integral is not obviously a generalization of the Riemann integral, but it is not hard to prove that every Riemann-integrable function is Lebesgue-integrable and that the values of the two integrals agree whenever they are both defined. Moreover, a bounded Lebesgue-integrable function f defined on a bounded interval is Riemann-integrable if and only if the set of points where f is discontinuous has Lebesgue measure zero.

An integral which is in fact a direct generalization of the Riemann integral is the Henstock-Kurzweil integral.

Another way of generalizing the Riemann integral is to replace the factors x_{i+1} - x_i in the definition of a Riemann sum by something else; roughly speaking, this gives the interval of integration a different notion of length. This is the approach taken by the Riemann-Stieltjes integral.

ee also

* Antiderivative
* Riemann-Stieltjes integral
* Henstock-Kurzweil integral
* Lebesgue integral
* Darboux integral

References

* Shilov, G. E., and Gurevich, B. L., 1978. "Integral, Measure, and Derivative: A Unified Approach", Richard A. Silverman, trans. Dover Publications. ISBN 0-486-63519-8.


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Riemann-Integral — Das Riemann Integral ist eine nach dem deutschen Mathematiker Bernhard Riemann benannte Methode zur Präzisierung der anschaulichen Vorstellung des Flächeninhaltes zwischen der x Achse und dem Graphen einer Funktion. Der riemannsche… …   Deutsch Wikipedia

  • riemann integral — noun Usage: usually capitalized R : a definite integral defined as the limit of sums found by partitioning the interval comprising the domain of definition into subintervals, by finding the sum of products each of which consists of the width of a …   Useful english dictionary

  • Riemann integral — Math. integral (def. 8a). [1910 15; named after G. F. B. RIEMANN] * * * …   Universalium

  • Riemann integral — Rie′mann in tegral n. math. integral 7), a) • Etymology: 1910–15; after G. F. B. Riemann …   From formal English to slang

  • Riemann integral — noun Date: 1914 a definite integral defined as the limit of sums found by partitioning the interval comprising the domain of definition into subintervals, by finding the sum of products each of which consists of the width of a subinterval… …   New Collegiate Dictionary

  • Integral — This article is about the concept of integrals in calculus. For the set of numbers, see integer. For other uses, see Integral (disambiguation). A definite integral of a function can be represented as the signed area of the region bounded by its… …   Wikipedia

  • Riemann-Stieltjes integral — In mathematics, the Riemann Stieltjes integral is a generalization of the Riemann integral, named after Bernhard Riemann and Thomas Joannes Stieltjes. DefinitionThe Riemann Stieltjes integral of a real valued function f of a real variable with… …   Wikipedia

  • Riemann , (Georg Friedrich) Bernhard — (1826–1866) German mathematician Riemann was born at Breselenz in Germany and, before studying mathematics in earnest, studied theology in preparation for the priesthood at his father s request. Fortunately he was able to persuade his father, a… …   Scientists

  • integral — integrality, n. integrally, adv. /in ti greuhl, in teg reuhl/, adj. 1. of, pertaining to, or belonging as a part of the whole; constituent or component: integral parts. 2. necessary to the completeness of the whole: This point is integral to his… …   Universalium

  • Riemann-Zerlegung — Eine Riemann Zerlegung ist ein Paar einer Familie von Stützstellen ξ0 bis und Zwischenstellen α1 bis , die ein Intervall [a,b], folgendermaßen zerlegt …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”