Gasification

Gasification
El-v-01 ubt.jpeg
Sustainable energy
Renewable energy
Anaerobic digestion · Biomass
Hydroelectricity · Geothermal
Solar · Tidal
Wave · Wind
Energy conservation
Cogeneration · Energy efficiency
Geothermal · Green building
Microgeneration · Passive Solar
Organic Rankine Cycle
Sustainable transport
Biofuel · Electric vehicles
Plug-in hybrids
v · d · e

Gasification is a process that converts organic or fossil based carbonaceous materials into carbon monoxide, hydrogen, carbon dioxide and methane. This is achieved by reacting the material at high temperatures (>700°C), without combustion, with a controlled amount of oxygen and/or steam. The resulting gas mixture is called syngas (from synthesis gas or synthetic gas) or producer gas and is itself a fuel. The power derived from gasification of biomass and combustion of the resultant gas is considered to be a source of renewable energy;[1][2][3][4] the gasification of fossil fuel derived materials such as plastic is not considered to be renewable energy.

The advantage of gasification is that using the syngas is potentially more efficient than direct combustion of the original fuel because it can be combusted at higher temperatures or even in fuel cells, so that the thermodynamic upper limit to the efficiency defined by Carnot's rule is higher or not applicable. Syngas may be burned directly in gas engines, used to produce methanol and hydrogen, or converted via the Fischer-Tropsch process into synthetic fuel. Gasification can also begin with material which would otherwise have been disposed of such as biodegradable waste. In addition, the high-temperature process refines out corrosive ash elements such as chloride and potassium, allowing clean gas production from otherwise problematic fuels. Gasification of fossil fuels is currently widely used on industrial scales to generate electricity.

Contents

History

Adler Diplomat 3 with gas generator (1941)

The process of producing energy using the gasification method has been in use for more than 180 years. During that time coal and peat were used to power these plants. Initially developed to produce town gas for lighting & cooking in 1800s, this was replaced by electricity and natural gas, it was also used in blast furnaces but the bigger role was played in the production of synthetic chemicals where it has been in use since the 1920s.

During both world wars especially the Second World War the need of gasification produced fuel reemerged due to the shortage of petroleum.[5] Wood gas generators, called Gasogene or Gazogène, were used to power motor vehicles in Europe. By 1945 there were trucks, buses and agricultural machines that were powered by gasification. It is estimated that there were close to 9,000,000 vehicles running on producer gas all over the world.

Chemistry

In a gasifier, the carbonaceous material undergoes several different processes:

Pyrolysis of carbonaceous fuels
Gasification of char
  1. The dehydration or drying process occurs at around 100°C. Typically the resulting steam is mixed into the gas flow and may be involved with subsequent chemical reactions, notably the water-gas reaction if the temperature is sufficiently high enough (see step #5).
  2. The pyrolysis (or devolatilization) process occurs at around 200-300°C. Volatiles are released and char is produced, resulting in up to 70% weight loss for coal. The process is dependent on the properties of the carbonaceous material and determines the structure and composition of the char, which will then undergo gasification reactions.
  3. The combustion process occurs as the volatile products and some of the char reacts with oxygen to primarily form carbon dioxide and small amounts of carbon monoxide, which provides heat for the subsequent gasification reactions. Letting C represent a carbon-containing organic compound, the basic reaction here is {\rm C} + {\rm O}_2 \rarr {\rm CO}_2
  4. The gasification process occurs as the char reacts with carbon and steam to produce carbon monoxide and hydrogen, via the reaction {\rm C} + {\rm H}_2 {\rm O} \rarr {\rm H}_2 + {\rm CO}
  5. In addition, the reversible gas phase water gas shift reaction reaches equilibrium very fast at the temperatures in a gasifier. This balances the concentrations of carbon monoxide, steam, carbon dioxide and hydrogen. {\rm CO} + {\rm H}_2 {\rm O} \lrarr {\rm CO}_2 + {\rm H}_2

In essence, a limited amount of oxygen or air is introduced into the reactor to allow some of the organic material to be "burned" to produce carbon monoxide and energy, which drives a second reaction that converts further organic material to hydrogen and additional carbon dioxide. Further reactions occur when the formed carbon monoxide and residual water from the organic material react to form methane and excess carbon dioxide. This third reaction occurs more abundantly in reactors that increase the residence time of the reactive gases and organic materials, as well as heat and pressure. Catalysts are used in more sophisticated reactors to improve reaction rates, thus moving the system closer to the reaction equilibrium for a fixed residence time.

Gasification processes

Several types of gasifier are currently available for commercial use: counter-current fixed bed, co-current fixed bed, fluidized bed, entrained flow and plasma.[1][6][7][8]

Counter-current fixed bed ("up draft") gasifier

A fixed bed of carbonaceous fuel (e.g. coal or biomass) through which the "gasification agent" (steam, oxygen and/or air) flows in counter-current configuration. The ash is either removed dry or as a slag. The slagging gasifiers have a lower ratio of steam to carbon,[9] achieving temperatures higher than the ash fusion temperature. The nature of the gasifier means that the fuel must have high mechanical strength and must ideally be non-caking so that it will form a permeable bed, although recent developments have reduced these restrictions to some extent. The throughput for this type of gasifier is relatively low. Thermal efficiency is high as the gas exit temperatures are relatively low. However, this means that tar and methane production is significant at typical operation temperatures, so product gas must be extensively cleaned before use. The tar can be recycled to the reactor.

In the gasification of fine, undensified biomass such as rice hulls, it is necessary to force air into the reactor by means of a fan. This creates very high gasification temperatures, at times as high as 1000 C. Above the gasification zone, a bed of fine, hot char is formed, and as the gas is forced through this bed, most complex hydrocarbons are broken down into simple components of hydrogen and carbon monoxide.[citation needed]

Co-current fixed bed ("down draft") gasifier

Similar to the counter-current type, but the gasification agent gas flows in co-current configuration with the fuel (downwards, hence the name "down draft gasifier"). Heat needs to be added to the upper part of the bed, either by combusting small amounts of the fuel or from external heat sources. The produced gas leaves the gasifier at a high temperature, and most of this heat is often transferred to the gasification agent added in the top of the bed, resulting in an energy efficiency on level with the counter-current type. Since all tars must pass through a hot bed of char in this configuration, tar levels are much lower than the counter-current type.

Fluidized bed reactor

The fuel is fluidized in oxygen and steam or air. The ash is removed dry or as heavy agglomerates that defluidize. The temperatures are relatively low in dry ash gasifiers, so the fuel must be highly reactive; low-grade coals are particularly suitable. The agglomerating gasifiers have slightly higher temperatures, and are suitable for higher rank coals. Fuel throughput is higher than for the fixed bed, but not as high as for the entrained flow gasifier. The conversion efficiency can be rather low due to elutriation of carbonaceous material. Recycle or subsequent combustion of solids can be used to increase conversion. Fluidized bed gasifiers are most useful for fuels that form highly corrosive ash that would damage the walls of slagging gasifiers. Biomass fuels generally contain high levels of corrosive ash.

Entrained flow gasifier

A dry pulverized solid, an atomized liquid fuel or a fuel slurry is gasified with oxygen (much less frequent: air) in co-current flow. The gasification reactions take place in a dense cloud of very fine particles. Most coals are suitable for this type of gasifier because of the high operating temperatures and because the coal particles are well separated from one another.

The high temperatures and pressures also mean that a higher throughput can be achieved, however thermal efficiency is somewhat lower as the gas must be cooled before it can be cleaned with existing technology. The high temperatures also mean that tar and methane are not present in the product gas; however the oxygen requirement is higher than for the other types of gasifiers. All entrained flow gasifiers remove the major part of the ash as a slag as the operating temperature is well above the ash fusion temperature.

A smaller fraction of the ash is produced either as a very fine dry fly ash or as a black colored fly ash slurry. Some fuels, in particular certain types of biomasses, can form slag that is corrosive for ceramic inner walls that serve to protect the gasifier outer wall. However some entrained flow type of gasifiers do not possess a ceramic inner wall but have an inner water or steam cooled wall covered with partially solidified slag. These types of gasifiers do not suffer from corrosive slags.

Some fuels have ashes with very high ash fusion temperatures. In this case mostly limestone is mixed with the fuel prior to gasification. Addition of a little limestone will usually suffice for the lowering the fusion temperatures. The fuel particles must be much smaller than for other types of gasifiers. This means the fuel must be pulverized, which requires somewhat more energy than for the other types of gasifiers. By far the most energy consumption related to entrained flow gasification is not the milling of the fuel but the production of oxygen used for the gasification.

Plasma gasifier

In a plasma gasifier a high-voltage current is fed to a torch, creating a high-temperature arc. The inorganic residue is retrieved as a glass-like substance.

Feedstock

There are a large number of different feedstock types for use in a gasifier, each with different characteristics, including size, shape, bulk density, moisture content, energy content, chemical composition, ash fusion characteristics, and homogeneity of all these properties.

A wide variety of feedstocks can be gasified, with wood pellets and chips, waste wood, plastics and aluminium, Municipal Solid Waste (MSW), Refuse-derived fuel (RDF), agricultural and industrial wastes, sewage sludge, switch grass, discarded seed corn, corn stover and other crop residues all being used.[1]

Chemrec has developed a process for gasification of black liquor.[10]

Waste disposal

HTCW reactor, one of several proposed waste gasification processes. According to the sales and sales management consultants KBI Group a pilot plant in Arnstadt implementing this process has completed initial tests.[11]

Waste gasification has several advantages over incineration:

  • The necessary extensive flue gas cleaning may be performed on the syngas instead of the much larger volume of flue gas after combustion.
  • Electric power may be generated in engines and gas turbines, which are much cheaper and more efficient than the steam cycle used in incineration. Even fuel cells may potentially be used, but these have rather severe requirements regarding the purity of the gas.
  • Chemical processing of the syngas may produce other synthetic fuels instead of electricity.
  • Some gasification processes treat ash containing heavy metals at very high temperatures so that it is released in a glassy and chemically stable form.

A major challenge for waste gasification technologies is to reach an acceptable (positive) gross electric efficiency. The high efficiency of converting syngas to electric power is counteracted by significant power consumption in the waste preprocessing, the consumption of large amounts of pure oxygen (which is often used as gasification agent), and gas cleaning. Another challenge becoming apparent when implementing the processes in real life is to obtain long service intervals in the plants, so that it is not necessary to close down the plant every few months for cleaning the reactor.

Several waste gasification processes have been proposed, but few have yet been built and tested, and only a handful have been implemented as plants processing real waste, and most of the time in combination with fossil fuels.[12]

One plant (in Chiba, Japan using the Thermoselect process[13]) has been processing industrial waste since year 2000, but has not yet documented positive net energy production from the process.

In the USA, gasification of waste is expanding across the country. Ze-gen is operating a waste gasification demonstration facility in New Bedford, Massachusetts. The facility was designed to demonstrate gasification of specific non-MSW waste streams using liquid metal gasification.[14] In addition, construction of a biomass gasification plant was approved in DeKalb County, Georgia on June 14, 2011 and in Green Bay Wisconsin a deal was made with the Oneida Nation and the city of Green Bay to build a gasification power plant which will supply electricity to over 4,000 homes.[15]

Also in the USA, plasma is being used to gasify municipal solid waste, hazardous waste and biomedical waste at the Hurlburt Field Florida Special Operations Command Air Force base. PyroGenesis Canada Inc. is the technology provider.[16]

Current applications

Syngas can be used for heat production and for generation of mechanical and electrical power. Like other gaseous fuels, producer gas gives greater control over power levels when compared to solid fuels, leading to more efficient and cleaner operation.

Syngas can also be used for further processing to liquid fuels or chemicals.

Heat

Gasifiers offer a flexible option for thermal applications, as they can be retrofitted into existing gas fueled devices such as ovens, furnaces, boilers, etc., where syngas may replace fossil fuels. Heating values of syngas are generally around 4-10 MJ/m3.

Electricity

Industrial-scale gasification is currently mostly used to produce electricity from fossil fuels such as coal, where the syngas is burned in a gas turbine. Gasification is also used industrially in the production of electricity, ammonia and liquid fuels (oil) using Integrated Gasification Combined Cycles (IGCC), with the possibility of producing methane and hydrogen for fuel cells. IGCC is also a more efficient method of CO2 capture as compared to conventional technologies. IGCC demonstration plants have been operating since the early 1970s and some of the plants constructed in the 1990s are now entering commercial service.

Combined heat and power

In small business and building applications, where the wood source is sustainable, 250-1000 kWe and new zero carbon biomass gasification plants have been installed in Europe that produce tar free syngas from wood and burn it in reciprocating engines connected to a generator with heat recovery. This type of plant is often referred to as a wood biomass CHP unit but is a plant with seven different processes: biomass processing, fuel delivery, gasification, gas cleaning, waste disposal, electricity generation and heat recovery.[17]

Transport fuel

Diesel engines can be operated on dual fuel mode using producer gas. Diesel substitution of over 80% at high loads and 70-80% under normal load variations can easily be achieved.[18] Spark ignition engines and SOFC fuel cells can operate on 100% gasification gas.[19][20][21] Mechanical energy from the engines may be used for e.g. driving water pumps for irrigation or for coupling with an alternator for electrical power generation.

While small scale gasifiers have existed for well over 100 years, there have been few sources to obtain a ready to use machine. Small scale devices are typically DIY projects. However, currently in the United States, several companies offer gasifiers to operate small engines. In 2009 21stCenturyMotorworks claimed to have developed gasification technology in a prototype pickup truck that could use any biomass materials for fuel,[22] the vehicle was displayed at multiple events including the 2009 Boston Greenfest.

Renewable energy and fuels

Gasification plant Güssing, Austria (2006)

In principle, gasification can proceed from just about any organic material, including biomass and plastic waste. The resulting syngas can be combusted. Alternatively, if the syngas is clean enough, it may be used for power production in gas engines, gas turbines or even fuel cells, or converted efficiently to dimethyl ether (DME) by methanol dehydration, methane via the Sabatier reaction, or diesel-like synthetic fuel via the Fischer-Tropsch process. In many gasification processes most of the inorganic components of the input material, such as metals and minerals, are retained in the ash. In some gasification processes (slagging gasification) this ash has the form of a glassy solid with low leaching properties, but the net power production in slagging gasification is low (sometimes negative) and costs are higher.

Regardless of the final fuel form, gasification itself and subsequent processing neither directly emits nor traps greenhouse gases such as carbon dioxide. Power consumption in the gasification and syngas conversion processes may be significant though, and may indirectly cause CO2 emissions; in slagging and plasma gasification, the electricity consumption may even exceed any power production from the syngas.

Combustion of syngas or derived fuels emits exactly the same amount of carbon dioxide as would have been emitted from direct combustion of the initial fuel. Biomass gasification and combustion could play a significant role in a renewable energy economy, because biomass production removes the same amount of CO2 from the atmosphere as is emitted from gasification and combustion. While other biofuel technologies such as biogas and biodiesel are carbon neutral, gasification in principle may run on a wider variety of input materials and can be used to produce a wider variety of output fuels.

There are at present a few industrial scale biomass gasification plants. Since 2008 in Svenljunga, Sweden, a biomass gasification plant generates up to 14 MWth, supplying industries and citizens of Svenljunga with process steam and district heating, respectively. The gasifier uses biomass fuels such as CCA or creosote impregnated waste wood and other kinds of recycled wood to produces syngas that is combusted on site.[23][24] In 2011 a similar gasifier, using the same kinds of fuels, is being installed at Munkfors Energy's CHP plant. The CHP plant will generate 2 MWe (electricity) and 8 MWth (district heating).[25][26]

Examples of demonstration projects include:

  • Those of the Renewable Energy Network Austria,[27] including a plant using dual fluidized bed gasification that has supplied the town of Güssing with 2 MW of electricity, produced utilising GE Jenbacher reciprocating gas engines[28][29] and 4 MW of heat,[30] generated from wood chips, since 2003.
  • Chemrec's pilot plant in Piteå that has produced 3 MW of clean syngas since 2006, generated from entrained flow gasification of black liquor.[10]
  • The US Air Force Transportable Plasma Waste to Energy System (TPWES) facility at Hurlburt Field, Florida.[31]

See also

References

  1. ^ a b c National Non-Food Crops Centre. "Review of Technologies for Gasification of Biomass and Wastes, NNFCC 09-008", Retrieved on 2011-06-24
  2. ^ The Clean and Renewable Energy Source, www.biomass.uk.com, accessed 16.05.11
  3. ^ Thermal Gasification of Biomass, International Energy Agency Task 33, www.gastechnology.org, accessed 16.05.11
  4. ^ Clean Renewable Fuel from the Plasma Gasification of Waste, www.waste-management-world.com, Accessed 16.05.2011
  5. ^ Gas Generator Project History of the Gasogene technology
  6. ^ Beychok, M.R., Process and environmental technology for producing SNG and liquid fuels, U.S. EPA report EPA-660/2-75-011, May 1975
  7. ^ Beychok, M.R., Coal gasification for clean energy, Energy Pipelines and Systems, March 1974
  8. ^ Beychok, M.R., Coal gasification and the Phenosolvan process, American Chemical Society 168th National Meeting, Atlantic City, September 1974
  9. ^ Kamka, Frank; Jochmann, Andreas (June 2005). "Development Status of BGL-Gasification" (PDF). International Freiberg Conference on IGCC & XtL Technologies, speaker Lutz Picard. http://www.iec.tu-freiberg.de/conference/conference_05/pdf/21_Picard.pdf. Retrieved 2011-03-19. 
  10. ^ a b Chemrec web site
  11. ^ HTCW commercial web page
  12. ^ Gasification case studies by the Environment Agency of England and Wales
  13. ^ Thermoselect website — A waste gasification plant supplier
  14. ^ "Teaching the Government to Love Garbage". GreenTech. 2009-12-14. http://news.cnet.com/greentech/?keyword=Ze-gen. Retrieved 2010-01-07. 
  15. ^ Oneida tribe's alternative energy plant approved by Green Bay City Council by the [(Green Bay Press Gazette)]
  16. ^ "AFSOC makes 'green' history while investing in future". US Air Force Special Operations Command. http://www.afsoc.af.mil/news/story.asp?id=123253735. Retrieved 2011-04-28. 
  17. ^ Wood Gasification CHP / Cogeneration Plants, 02.09.09
  18. ^ Gasification Appliances Review, 04.02.08
  19. ^ Electricity from wood through the combination of gasification and solid oxide fuel cells, Ph.D. Thesis by Florian Nagel, Swiss Federal Institute of Technology Zurich, 2008
  20. ^ Characterization of biomass producer gas as fuel for stationary gas engines in combined heat and power production, Ph.D. Thesis by Jesper Ahrenfeldt, Technical University of Denmark March 2007
  21. ^ High temperature electrolyte supported Ni-GDC/YSZ/LSM SOFC operation on two-stage Viking gasifier product gas, Ph. Hofmann et al. in Journal of Power Sources 173 (2007) 357–366
  22. ^ 21stCenturyMotorworks web page
  23. ^ Gasification allows less emissions, less dust and fuel flexibility - News at Elmia Recycling to Energy 2010, 03.03.11
  24. ^ SFC - Soot Free Combustion: large scale biomass gasification, 03.03.11
  25. ^ Biofuel gasification in unique CHP plant, 04.04.11
  26. ^ Munkfors Energy invests in new combined heat and power plant, 03.03.11
  27. ^ RENET - The path to energy autonomy
  28. ^ Gussing Biomass Power Plant, www.clarke-energy.com, accessed 17.05.2011
  29. ^ Latest Developments in the Utilisation of Wood Gas in Gas Engines, www.idgte.ca, accessed 17.05.2011
  30. ^ The FICFB-gasification system
  31. ^ "AFSOC makes 'green' history while investing in future". US Air Force Special Operations Command. http://www.afsoc.af.mil/news/story.asp?id=123253735. Retrieved 2011-04-28. 

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Gasification — Gas i*fi*ca tion, n. [See {Gasify}.] The act or process of converting into gas. [1913 Webster] …   The Collaborative International Dictionary of English

  • Gasification — Gazéification La gazéification est un procédé qui permet de convertir des matières carbonées, comme le charbon, le pétrole, ou de la biomasse, en monoxyde de carbone et en hydrogène par réaction de la matière première avec une quantité contrôlée… …   Wikipédia en Français

  • Gasification —   The process in which a solid fuel is converted into a gas; also known as pyrolitic distillation or pyrolysis. Production of a clean fuel gas makes a wide variety of power options available.   ***   A method for converting coal, petroleum,… …   Energy terms

  • gasification — dujinimas statusas T sritis Standartizacija ir metrologija apibrėžtis Kietojo ar skystojo kuro vertimas degiosiomis dujomis. atitikmenys: angl. gasification vok. Vergasung, f rus. газификация, f pranc. aérification, f; gazéification, f …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

  • gasification — dujinimas statusas T sritis chemija apibrėžtis Kietojo ar skystojo kuro vertimas degiosiomis dujomis. atitikmenys: angl. gasification rus. газификация ryšiai: sinonimas – gazifikacija …   Chemijos terminų aiškinamasis žodynas

  • gasification — dujinimas statusas T sritis Energetika apibrėžtis Kietojo ar skystojo kuro vertimas dujiniu kuru, oksiduojant jį oru, deguonimi ar vandens garu, esant mažam oksidatoriaus (α = 0,4 – 0,5) kiekiui. Dujinimas atliekamas dujų generatoriuose.… …   Aiškinamasis šiluminės ir branduolinės technikos terminų žodynas

  • gasification — gas ► NOUN (pl. gases or chiefly US gasses) 1) an air like fluid substance which expands freely to fill any space available, irrespective of its quantity. 2) a flammable substance of this type used as a fuel. 3) a gaseous anaesthetic such as… …   English terms dictionary

  • gasification — noun the process of changing into gas coal gas is produced by the gasification of coal • Derivationally related forms: ↑gasify • Hypernyms: ↑chemical process, ↑chemical change, ↑chemical action …   Useful english dictionary

  • gasification — noun Date: 1812 conversion into gas; especially conversion of coal into natural gas …   New Collegiate Dictionary

  • gasification — See gasifiable. * * * …   Universalium

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”