Pattern 1913 Enfield

Infobox Weapon|is_ranged=yes


caption=Pattern 1913 Enfield
name=Rifle, Pattern 1913
type=Service rifle
origin=UK
era=pre-WWI
design_date=1912
prod_design_date=Development and experimental/trials only
serv_design_date=Did not enter service
used_by=UK
wars=Did not enter service
spec_type=Bolt action rifle
caliber=.276 inch (7.0 mm)
part_length=
cartridge=.276 inch (7.0 mm)
feed=5 round, clip fed reloading
action=Modified Mauser turn bolt
rate=Manual, as determined by skill of operator
velocity=convert|2785|ft/s|m/s|1|lk=on
weight=convert|8|lb|11|oz|kg|1|lk=on (Empty)
length=convert|3|ft|10.3|in|m|1|lk=on
variants=Pattern 1914, Model of 1917(US)
number=1257
range=

The Pattern 1913 Enfield (P'13) was an experimental rifle developed by the Royal Small Arms Factory for the British Army from 1912 to 1914 to serve as a replacement for the Short Magazine Lee-Enfield (SMLE). Designed for a smaller round than the service-issue .303 cartridge, putting the P'13 into service was rendered impractical by the outbreak of the First World War.

History

During the Second Boer War the British Army had been faced with forces equipped with the Mauser Model 1895, in 7 x 57 mm caliber. This smaller, high-velocity round prompted the War Office to develop their own "magnum" round in 1910, using a .276 calibre rimless cartridge patterned after that of the Canadian Ross rifle.Fact|date=May 2008 In August 1910 the Small Arms Committee, which had been responsible for the adoption of the Short Magazine Lee Enfield, was asked by the Director of Artillery to produce a new specifaction for a service rifle. The main changes called for a Mauser-style action and a one piece stock (a cheaper and more serviceable option). [cite book |title=The U.S. Enfield |last=Skennerton |pages=pp. 1–2 ] In response Birmingham Small Arms (BSA) submitted a design chambered for a rimless high-velocity cartridge. In 1911 the Royal Small Arms Factory (RSAF) at Enfield, the British Government's design and production facility, produced a modified Mauser-pattern rifle for a similar cartridge, the .276. This rifle was presented to the Small Arms Committee on 3 April 1911 by the Assistant Superintendent Carnegie, and the Chief Designer Reavill. [cite book |title=The U.S. Enfield |last=Skennerton |pages=p. 5 ]

Initially the RSAF designed the new rifle, at this point the Pattern 1911, aoround two calibres; the .276 and the .256. The .256 was found to be inaccurate and the .276 was adopted in mid-1911 for further testing. Problems with pressure resulting from the high velocity round led to the cartridge being redesigned. Numerous changes to the rifle and the cartridge led to eleven Pattern 1911 and Pattern 1912 rifles being manufactured. At the end of 1912 it was decided to put the latest incarnation of the design into limited production for troop trials in 1913 and 1,000 were ordered from RSAF. By the end of 1912 508 had been completed, and by the end of January 1913 1,251 had been manufactured. The rifle was distributed to the army as the Rifle, Magazine, Enfield, .276-inch. The trials took place in Britain, Ireland, Egypt and South Africa and at the end the Chief Inspector of Small Arms recommended a number of changes, which resulted in a quantity of 6 improved Pattern 1913 rifles being manufactured between March and April 1914. The outbreak of World War I led to the abandonment of the effort to introduce a smaller caliber rimless cartridge for purely practical reasons. Adapting the same rifle (with largely cosmetic alterations aside from chamber and extractor redesign) to fire the standard .303 British round led to the Pattern 14 Rifle (P'14), a competent design fed from a five-round internal magazine. Effective mass production in Britain during WWI was impossible, and so the P'14 became a "de facto" afterthought. Thus the SMLE remained the standard British rifle during WWI and beyond.

The lack of industrial capacity led the British government to contract with US commercial arms manufacturers: Winchester Repeating Arms Company, Remington Arms and Eddystone (a non-governmental arms manufacturer owned by Remington Arms) who produced the P'14 in .303 for the British Army before the United States entered the war in 1917. When the US entered the war, the P'14 was modified and standardized by the US Ordnance Department and went into production at the same factories as had produced the P'14, production of that rifle having ceased, as the Model of 1917, commonly M1917 Enfield, chambered for the standard US 30-06 cartridge and enjoyed some success as a complement for the Springfield M1903 rifles which were America's official standard issue, soon far surpassing the Springfield in total production and breadth of issue.

Some P'13s survived as target rifles in the UK, often having been "sporterized" (removal of wooden handguards and shortening of the stock).Fact|date=June 2008 Very few were produced, and so very few survive.

Notes

References

*