Vertex configuration

Vertex configuration

In polyhedral geometry a vertex configuration is a short-hand notation for representing a polyhedron vertex figure as the sequence of faces around a vertex. For "uniform polyhedra" there is only one vertex type and therefore the vertex configuration fully defines the polyhedron. (Chiral polyhedra exist in mirror image pairs with the same vertex configuration.)

A "vertex configuration" is given as a sequence of numbers representing the number of sides of the faces going around the vertex. A "a.b.c" means a vertex has 3 faces around it, with "a", "b", and "c" sides.

For example "3.5.3.5" means a vertex has 4 faces, alternating triangles and pentagons. This vertex configuration defines the vertex-uniform icosidodecahedron polyhedron.

Vertex Figures

A "vertex configuration" can also be represented graphically as vertex figure showing the faces around the vertex. This "vertex figure" has a 3-dimensional structure since the faces are not in the same plane for polyhedra, but for vertex-uniform polyhedra all the neighboring vertices are in the same plane and so this plane projection can be used to visually represent the vertex configuration.

See image category:

Variations and uses

Different notations are used, sometimes with a comma (","), and sometimes a period (".") separator. The period operator is useful because it looks like a product and an exponent notation can be used. For example "3.5.3.5" is sometimes written as (3.5)^2 or (3.5)2.

The order is important and so 3.3.5.5 is different from 3.5.3.5. The first has two triangles followed by two pentagons.

The notation can also be considered an expansive form of the simple Schläfli symbol for regular polyhedra. {p,q} means q p-agons around each vertex. So this can be written as p.p.p... (q times). For example an icosahedron is {3,5} = 3.3.3.3.3 = 3^ 5= 35.

The notation is cyclic and therefore is equivalent with different starting points. So 3.5.3.5 is the same as 5.3.5.3. To be unique, usually the smallest face (or sequence of smallest faces) are listed first.

This notation applies to polygon tiles as well as polyhedra. A planar "vertex configuration" can imply a uniform tiling just like a nonplanar "vertex configuration" can imply a uniform polyhedron.

The notation is ambiguous for chiral forms. For example, the snub cube has a clockwise and counterclockwise form which are identical across mirror images. Both have a "3.3.3.3.4" vertex configuration.

Star polygons

The notation also applies for nonconvex regular faces, the star polygons. For example a pentagram has "5/2" sides meaning 5 vertex going around the vertex twice. For example, the nonconvex regular polyhedron small stellated dodecahedron has a vertex configuration of Schläfli symbol of {5/2,5} which expands to an explicit "vertex configuration" as "5/2.5/2.5/2.5/2.5/2".

The last, "U75", nonconvex uniform polyhedron great dirhombicosidodecahedron has a vertex figure of "4.5/3.4.3.4.5/2.4.3/2". This complex vertex figure has 8 faces that pass around the vertex twice.

Inverted polygons

Faces on a vertex figure are considered to progress in one direction. Some uniform polyhedra have vertex figures with inversions where the faces progress retrograde. A vertex figure represents this in the Star polygon notation of sides "p/q" as an improper fraction (greater than one), where "p" is the number of sides and "q" the number of turns around a circle. For example "3/2" means a triangle that has vertices that go around twice, which is the same as backwards once. Similarly "5/3" is a backwards pentagram "5/2".

All uniform vertex configurations of regular convex polygons

The existence of semiregular polyhedra can be enumerated by looking at their vertex configuration and the angle defect: A set of regular faces must have internal angles less than 360 degees.

NOTE: The vertex figure can represent a regular or semiregular tiling on the plane if equal to 360. It can represent a tiling of the hyperbolic plane if greater than 360 degrees.

For uniform polyhedra, the angle defect can be used to compute the number of vertices. (The angle defect is defined as 360 degrees minus the sum of all the internal angles of the polygons that meet at the vertex.) Descartes' theorem states that the sum of all the angle defects in a topological sphere must add to 4*π radians or 720 degrees.

Since uniform polyhedra have all identical vertices, this relation allows us to compute the number of vertices: Vertices = 720/(angle-defect).

Example: A truncated cube 3.8.8 has an angle defect of 30 degrees. Therefore it has 720/30=24 vertices.

In particular it follows that {a,b} has 4/(2-b(1-2/a)) vertices.

Every enumerated vertex configuration potentially uniquely defines a semiregular polyhedron. However not all configurations are possible.

Topological requirements limit existence. Specifically "p.q.r" implies that a "p"-gon is surrounded by alternating a "q"-gons and "r"-gons, so either "p" is even or "q=r". Similarly "q" is even or "p=r". Therefore potentially possible triples are 3.3.3, 3.4.4, 3.6.6, 3.8.8, 3.10.10, 3.12.12, 4.4."n" (for any "n">2), 4.6.6, 4.6.8, 4.6.10, 4.6.12, 4.8.8, 5.5.5, 5.6.6, 6.6.6. In fact, all these configurations with three faces meeting at each vertex turn out to exist.

Similarly when four faces meet at each vertex, "p.q.r.s", if one number is odd its neighbors must be equal.

The number in parentheses is the number of vertices, determined by the angle defect.

Triples
*Platonic solids 3.3.3 (4), 4.4.4 (8), 5.5.5 (20)
*prisms 3.4.4 (6), 4.4.4 (8; also listed above), 4.4."n" (2"n")
*Archimedean solids 3.6.6 (12), 3.8.8 (24), 3.10.10 (60), 4.6.6 (24), 4.6.8 (48), 4.6.10 (120), 5.6.6 (60).
*regular tiling 6.6.6
*semiregular tilings 3.12.12, 4.6.12, 4.8.8

Quadruples
*Platonic solid 3.3.3.3 (6)
*antiprisms 3.3.3.3 (6; also listed above), 3.3.3."n" (2"n")
*Archimedean solids 3.4.3.4 (12), 3.5.3.5 (30), 3.4.4.4 (24), 3.4.5.4 (60)
*regular tiling 4.4.4.4
*semiregular tilings 3.6.3.6, 3.4.6.4

QuintuplesFinally configurations with five and six faces meeting at each vertex:
*Platonic solid 3.3.3.3.3 (12)
*Archimedean solids 3.3.3.3.4 (24), 3.3.3.3.5 (60) (both chiral)
*semiregular tilings 3.3.3.3.6 (chiral), 3.3.3.4.4, 3.3.4.3.4 (note that the two different orders of the same numbers give two different patterns)

Sextuples
*regular tiling 3.3.3.3.3.3

"Face Configuration" for duals

The dual polyhedron are can also be listed by this notation, but prefixed by a "V". See face configuration.

The faces of semiregular polyhedral duals are not regular polygons, but edges vary in length in relation regular polygons in the dual. For example, you can tell a "face configuration" of "V3.4.3.4" represents a rhombus face since every edge is a "V3-V4" type, and "V3.4.5.4" will be a kite with two types of edges: "V3-V4" and "V4-V5".

Notation used in articles

* Uniform polyhedron
** Platonic solid
** Semiregular polyhedron
*** Archimedean solid
*** Prism (geometry)
*** Antiprism
** Johnson solids
** Near-miss Johnson solids
** List of uniform polyhedra by vertex figure
** List of Wenninger polyhedron models
** List of Uniform Polyhedra
** List of uniform planar tilings
* Face configuration
** Catalan solid - Archimedean duals
** Bipyramid - prism duals
** Trapezohedron - antiprism duals

References

*


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Vertex figure — In geometry a vertex figure is, broadly speaking, the figure exposed when a corner of a polyhedron or polytope is sliced off. Definitions theme and variationsTake some vertex of a polyhedron. Mark a point somewhere along each connected edge. Draw …   Wikipedia

  • Configuration graph — Configuration graphs are a theoretical tool used in computational complexity theory to prove a relation between graph reachability and complexity classes. Contents 1 Definition 2 Useful property 3 Use of this object …   Wikipedia

  • vertex — i. The last fix adapted on the arrival speed segment. Normally, it will be the outer marker of the runway in use. However, it may be the actual threshold or another suitable common point on the approach path for the particular runway… …   Aviation dictionary

  • vertex time of arrival — A calculated time of aircraft arrival over the adapted vertex for the runway configuration in use. This time is calculated via the optimum flight path using adapted speed segments …   Aviation dictionary

  • Face configuration — In geometry, a face configuration is notational description of a face transitive polyhedron. It represents a sequential count of the number of faces that exist at each vertex around a face.There is no single standard accepted representation, but… …   Wikipedia

  • Möbius configuration — Example of Möbius configuration; the face planes of red tetrahedron are shown on the top of the image; the blue one on the bottom. The vertex coordinates of the red tetrahedron are: (0,0,0),(0,0,1),(0,1,0),(1,0,0). The vertex coordinates of the… …   Wikipedia

  • Four color theorem — Example of a four colored map A four colori …   Wikipedia

  • Platonic solid — In geometry, a Platonic solid is a convex polyhedron that is regular, in the sense of a regular polygon. Specifically, the faces of a Platonic solid are congruent regular polygons, with the same number of faces meeting at each vertex; thus, all… …   Wikipedia

  • Quasiregular polyhedron — A polyhedron which has regular faces and is transitive on its edges but not transitive on its faces is said to be quasiregular.A quasiregular polyhedron can have faces of only two kinds and these must alternate around each vertex. They are given… …   Wikipedia

  • List of uniform tilings — This table shows the 11 convex uniform tilings of the Euclidean plane, and their dual tilings.There are three regular, and eight semiregular, tilings in the plane. The semiregular tilings form new tilings from their duals, each made from one type …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”