- In-circuit emulator
-
An in-circuit emulator (ICE) is a hardware device used to debug the software of an embedded system. It was historically in the form of bond-out processor which has many internal signals brought out for the purpose of debugging. These signals provided information about the state of the processor.
More recently the term also covers JTAG based hardware debuggers which provide equivalent access using on-chip debugging hardware with standard production chips. Using standard chips instead of custom bond-out versions makes the technology ubiquitous and low cost, and eliminates most differences between the development and runtime environments. In this common case, the in-circuit emulator term is a misnomer, sometimes confusingly so, because emulation is no longer involved.
Embedded systems present special problems for a programmer because they usually lack keyboards, monitors, disk drives and other user interfaces that are present on computers. These shortcomings make in-circuit software debugging tools essential for many common development tasks.
In-circuit emulation can also refer to the use of hardware emulation, when the emulator is plugged into a system (not always embedded) in place of a yet-to-be-built chip (not always a processor). These in-circuit emulators provide a way to run the system with "live" data while still allowing relatively good debugging capabilities. It can be useful to compare this with an in-target probe (ITP) sometimes used on enterprise servers.
Contents
Function
An in-circuit emulator provides a window into the embedded system. The programmer uses the emulator to load programs into the embedded system, run them, step through them slowly, and view and change data used by the system's software.
An "emulator" gets its name because it emulates (imitates) the central processing unit of the embedded system's computer. Traditionally it had a plug that inserts into the socket where the CPU chip would normally be placed. Most modern systems use the target system's CPU directly, with special JTAG-based debug access. Emulating the processor, or direct JTAG access to it, lets the ICE do anything that the processor can do, but under the control of a software developer.
ICEs attach a terminal or PC to the embedded system. The terminal or PC provides an interactive user interface for the programmer to investigate and control the embedded system. For example, it is routine to have a source code level debugger with a graphical windowing interface that communicates through a JTAG adapter ("emulator") to an embedded target system which has no graphical user interface.
Notably, when their program fails, most embedded systems simply become inert lumps of nonfunctioning electronics. Embedded systems often lack basic functions to detect signs of software failure, such as an MMU to catch memory access errors. Without an ICE, the development of embedded systems can be extremely difficult, because there is usually no way to tell what went wrong. With an ICE, the programmer can usually test pieces of code, then isolate the fault to a particular section of code, and then inspect the failing code and rewrite it to solve the problem.
In usage, an ICE provides the programmer with execution breakpoints, memory display and monitoring, and input/output control. Beyond this, the ICE can be programmed to look for any range of matching criteria to pause at, in an attempt to identify the origin of the failure.
Some recent ICE developments (Microchip MPLAB REAL ICE) utilize resources provided on the manufactured version of the microcontroller for emulation and debugging features, instead of needing another special emulation-version (that is, bond-out) of the target microcontroller. Even though it is a cost-effective method, since the ICE unit only manages the emulation instead of actually emulating the target microcontroller, trade-offs have to be made in order to keep the prices low at manufacture time, yet provide enough emulation features for the (relatively few) emulation applications.
Advantages
Virtually all embedded systems have a hardware element and a software element, which are separate but tightly interdependent. The ICE allows the software element to be run and tested on the actual hardware on which it is to run, but still allows programmer conveniences to help isolate faulty code, such as "source-level debugging" (which shows the program the way the programmer wrote it) and single-stepping (which lets the programmer run the program step-by-step to find errors).
Most ICEs consist of an adaptor unit that sits between the ICE host computer and the system to be tested. A header and cable assembly connects the adaptor to a socket where the actual CPU or microcontroller mounts within the embedded system. Recent ICEs enable a programmer to access the on-chip debug circuit that is integrated into the CPU via JTAG or BDM (Background Debug Mode) in order to debug the software of an embedded system. These systems often use a standard version of the CPU chip, and can simply attach to a debug port on a production system. They are sometimes called in-circuit debuggers or ICDs, to distinguish the fact that they do not replicate the functionality of the CPU, but instead control an already existing, standard CPU. Since the CPU does not have to be replaced, they can operate on production units where the CPU is soldered in and cannot be replaced. An example is Microchip Technology's ICD, which interfaces with most recent PIC microcontrollers to debug software by attaching to the PIC's In-circuit programming/debugging port. On x86 Pentiums, a special 'probe mode' is used by ICEs to aid in debugging.[1]
The ICE emulates the CPU. From the system's point of view, it has a real processor fitted, but from the programmer's point of view the system under test is under full control, allowing the developer to load, debug and test code directly.
Most host systems are ordinary commercial computers unrelated to the CPU used for development - for example, a Linux PC might be used to develop software for a system using a Freescale 68HC11 chip, which itself could not run Linux.
The programmer usually edits and compiles the embedded system's code on the host system, as well. The host system will have special compilers that produce executable code for the embedded system. These are called cross compilers or cross assemblers.
Notes
See also
External links
Categories:- Embedded systems
- Debugging
Wikimedia Foundation. 2010.
