Consolidated P-30

Consolidated P-30
P-30 (PB-2)
Consolidated P-30 (US Air Force Photo)
Role Fighter aircraft
Manufacturer Consolidated Aircraft
First flight January 1934
Status Retired
Primary user United States Army Air Corps
Number built 60

The Consolidated P-30 (PB-2) was a 1930s United States two-seat fighter aircraft. An attack version called the A-11 was also built, along with two Y1P-25 prototypes and YP-27, Y1P-28, and XP-33 proposals. The P-30 is significant for being the first fighter in United States Army Air Corps service to have retractable landing gear, an enclosed and heated cockpit for the pilot, and an exhaust-driven turbosupercharger for altitude operation.

Contents

Design and development

The P-30 had its origins in the canceled Detroit-Lockheed YP-24/A-9. After collapse of the Detroit Aircraft Corporation in 1931, the chief YP-24 designer Robert J. Woods went to work for Consolidated Aircraft. Since the YP-24 was a victim of the Great Depression and not flawed design and the Army Air Corps was still interested in the type, Woods continued his work, producing the Y1P-25. The new aircraft differed from the YP-24 in being somewhat larger and having an all-metal wing and a turbosupercharged engine. The Y1P-25 and its sister attack version, the Y1A-11 armed with four forward-firing machine guns and racks for 400 lb (182 kg) of bombs, were ready for testing in December 1932. Although both prototypes were lost in crashes a week apart in January 1933, the USAAC was pleased enough to order production of four P-30 fighters and four A-11 attack aircraft. Production versions differed from prototypes in having more powerful engines and revised landing gear and cockpit canopies. The Y1P-25 crashed during flight testing at Wright Field, Ohio, on 13 January 1933, killing Captain Hugh M. Elmendorf. Exactly one week later, on 20 January 1933, the prototype XA-11 attack aircraft crashed, claiming the life of Elmendorf's associate, Lieut. Irvin A. Woodring.

Operational history

US Army Air Corps testing in January 1934 revealed good performance, especially at altitude. However, pilots questioned utility of the gunner who had a limited field of fire and was vulnerable to blackouts during hard maneuvering. Three P-30s were delivered to the 94th Pursuit Squadron at Selfridge Field. In December 1934, the Army Air Corps ordered an additional 50 P-30A, redesignated PB-2A (Pursuit, Biplace), with further upgraded engines and onboard oxygen equipment for high altitude flying. On 17 October 1936, Lt. John M. Sterling flying a PB-2A won the Mitchell Trophy race with a speed of 217.5 mph (350.2 km/h). Although high-altitude flights were rare at the time, in March 1937, a PB-2A flew for 20 minutes at 39,300 ft (11,980 m). Since the PB-2A was one of the few aircraft at the time to have retractable landing gear, several were damaged in unintentional "wheels up" landings.

Consolidated attempted to further refine the design by proposing further variants:

None of these proposals advanced to prototype stage.

One PB-2A was converted to a single-seat configuration, proposed as a replacement for the USAAC's P-26 Peashooter fighter aircraft. However, this conversion was still too heavy for the role, and the sole aircraft crashed during early flight testing.

While generally trouble-free, the PB-2A was slow and heavy, and by 1939 all had been replaced in frontline service by Seversky P-35 and Curtiss P-36 Hawk aircraft.

The A-11 attack version failed to win a production order beyond the original four aircraft in spite of good performance because the USAAC wanted more durable radial engines for its attack aircraft. One was converted to the XA-11A testbed with the new Allison XV-1710-7 inline engine with 1,000 hp (746 kW).

Variants

  • Y1P-25 - further development of Lockheed YP-24, all-metal wing, Curtiss V-1570-27 Conqueror engine with 600 hp (448 kW) and turbosupercharger, 1 built
  • YP-27 - Pratt & Whitney R-1340-21G Wasp radial engine with 550 hp (410 kW), none built
  • Y1P-28 - Pratt & Whitney R-1340-19F Wasp with 600 hp (448 kW), none built
Consolidated A-11 (S/N 33-211, the last A-11 built) - National Museum of the USAF
  • P-30 (PB-2) - first production version of Y1P-25, V-1570-57 engine with 675 hp (504 kW) and turbosupercharger, 4 built
  • P-30A (PB-2A) - V-1570-61 engine with 700 hp (522 kW) and turbosupercharger, 50 built
  • XP-33 - Pratt & Whitney R-1830-1 Twin Wasp with 800 hp (597 kW), none built
  • Y1A-11 - ground attack version of Y1P-25 with 4x 0.30 in (7.62 mm) forward-firing machine guns and up to 400 lb (182 kg) of bombs, non-supercharged engine, 1 built
  • A-11 - trial run of the ground attack version, V-1570-59 engine without turbosupercharger, 4 built
  • XA-11A - Allison XV-1710-7 with 1,000 hp (746 kW), one A-11 converted by Bell Aircraft

Specifications (PB-2A)

Data from Singular Two-Seater[1]

General characteristics

  • Crew: 2
  • Length: 30 ft 0 in (9.14 m)
  • Wingspan: 43 ft 11 in (13.38 m)
  • Height: 8 ft 3 in (2.51 m)
  • Wing area: 297 ft (27.6 m)
  • Empty weight: 4,306 lb (1,950 kg)
  • Loaded weight: 5,623 lb (2,556 kg)
  • Powerplant: 1 × Curtiss V-1570-61 Conqueror liquid-cooled V12 engine, 700 hp (520 kW)

Performance

  • Maximum speed: 275 mph (239 knots, 443 km/h) at 25,000 ft (7,620 m)[2]
  • Cruise speed: 215 mph (187 knots, 346 km/h) at 15,000 ft (4,600 m)
  • Range: 508 mi (442 nmi, 818 km)
  • Service ceiling: 28,000 ft (8,530 m)
  • Climb to 15,000 ft (4,600 m): 7 min 48 s

Armament

  • Guns:
    • 2 x 0.30 in (7.62 mm) machine guns firing through the propeller
    • 1 x 0.30 in machine gun in the rear cockpit
  • Bombs: 170 lb (80 kg) bombs

See also

Related development
Aircraft of comparable role, configuration and era

Related lists

References

Notes
  1. ^ Pelletier 2000, p. 5
  2. ^ Angelucci and Bowers 1987, p. 30.
Bibliography
  • Angelucci, Enzo. and Peter M. Bowers, The American Fighter. New York: Orion Books, 1987. ISBN 0-517-56588-9.
  • Pelletier, Alain J. "Singular Two-Seater: Consolidated's PB-2A - The USAAC's Only Two-Seat Fighter". Air Enthusiast, No. 85, January/February 2000. pp. 2–11. ISSN 0143-5450.
  • Swanborough, Gordon and Peter M. Bowers. United States Military Aircraft Since 1909. Washington, DC: Smithsonian, 1989. ISBN 0-87474-880-1.

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Consolidated B-24 — Liberator …   Deutsch Wikipedia

  • Consolidated! — EP by Consolidated Released 1989 Genre …   Wikipedia

  • Consolidated B-32 — Dominator …   Deutsch Wikipedia

  • Consolidated — Con*sol i*da ted, p. p. & a. 1. Made solid, hard, or compact; united; joined; solidified. [1913 Webster] The Aggregate Fund . . . consisted of a great variety of taxes and surpluses of taxes and duties which were [in 1715] consolidated. Rees.… …   The Collaborative International Dictionary of English

  • Consolidated — B 24 Liberator Pour les articles homonymes, voir B 24 et Liberator. Consolidated B 24 Liberator …   Wikipédia en Français

  • Consolidated B-24 — Liberator Pour les articles homonymes, voir B 24 et Liberator. Consolidated B 24 Liberator …   Wikipédia en Français

  • Consolidated — may refer to: Consolidated (band) Consolidated Aircraft (later Convair), an aircraft manufacturer Consolidated city county Consolidation (soil) This disambiguation page lists articles associated with the same title. If an …   Wikipedia

  • Consolidated — bezeichnet: Consolidated (Band), eine US amerikanische Industrail Band Consolidated Aircraft, ein US amerikanischer Flugzeughersteller Diese Seite ist eine Begriffsklärung zur Unterscheidung mehrerer mit demselben Wort bezeichneter Begriffe …   Deutsch Wikipedia

  • consolidated — consolidated; un·consolidated; …   English syllables

  • consolidated — index coadunate, coherent (joined), cohesive (compact), collective, compact (dense), concert …   Law dictionary

  • consolidated — pp. adj. from CONSOLIDATE (Cf. consolidate). Of money, debt, etc., from 1753; in lit. sense of made firm, unified, from c.1850 …   Etymology dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”