- Optical disc recording modes
-
Optical discs Optical media types - Blu-ray Disc (BD): BD-R, BD-RE
- DVD: DVD-R, DVD+R, DVD-R DL, DVD+R DL, DVD-R DS, DVD+R DS, DVD-RW, DVD+RW, DVD-RAM, DVD-D, DVD-A, HVD, EcoDisc
- Compact Disc (CD): Red Book, CD-ROM, CD-R, CD-RW, 5.1 Music Disc, SACD, Photo CD, CD Video (CDV), Video CD (VCD), SVCD, CD+G, CD-Text, CD-ROM XA, CD-i
- Universal Media Disc (UMD)
- Enhanced Versatile Disc (EVD)
- Forward Versatile Disc (FVD)
- Holographic Versatile Disc (HVD)
- China Blue High-definition Disc (CBHD)
- HD DVD: HD DVD-R, HD DVD-RW, HD DVD-RAM
- High definition Versatile Multilayer Disc (HD VMD)
- VCDHD
- GD-ROM
- MiniDisc (MD) (Hi-MD)
- Laserdisc (LD) (LD-ROM)
- Video Single Disc (VSD)
- Ultra Density Optical (UDO)
- Stacked Volumetric Optical Disk (SVOD)
- Five dimensional disc (5D DVD)
- Nintendo optical disc (NOD)
Standards - SFF ATAPI/MMC
- Mount Rainier (packet writing)
- Mount Fuji (layer jump recording)
- Rainbow Books
- File systems
See also In optical disc authoring, there are multiple modes for recording, including Disc-At-Once, Track-At-Once, and Session-At-Once.
Contents
CD Disc-At-Once
Disc-At-Once or DAO for CD-R media is a mode that masters the disc contents in one pass, rather than a track at a time as in Track At Once. DAO mode, unlike TAO mode, allows any amount of audio data (or no data at all) to be written in the "pre-gaps" between tracks.
One use of this technique, for example, is to burn track introductions to be played before each track starts. A CD player will generally display a negative time offset counting up to the next track when such pre-gap introductions play. Pre-gap audio before the first track of the CD makes it possible to burn an unnumbered, "hidden" audio track. This track can only be accessed by "rewinding" from the start of the first track, backwards into the pre-gap audio.
DAO recording is also the only way to write data to the unused R-W sub-channels. This allows for extended graphic and text features on an audio CD such as CD+G and CD-Text. It is also the only way to write audio files that link together seamlessly with no gaps, a technique often used in progressive rock and other music genres.
CD Track-At-Once
Track-At-Once or TAO is a recording mode where the recording laser stops after each track is finished and two run-out blocks are written. One link block and four run-in blocks are written when the next track is recorded. TAO discs can have both data and audio at the same time.
There are 2 TAO writing modes
- Mode 1
- Mode 2 XA
DVD-R Disc At Once
Disc At Once recording for DVD-R media is a mode in which all data is written sequentially to the disc in one uninterrupted recording session. The on-disk contents result in a lead-in area, followed by the data, and closed by a lead-out area. The data is addressable in sectors of 2048 bytes each, with the first sector address being zero. There are no run-out blocks as in CD-R disc-at-once.
Session At Once
Session at Once or SAO recording allows multiple sessions to be recorded and finalized on a single disc. The resulting disc can be read by computer drives, but sessions after the first are generally not readable by CD Audio equipment.
Audio Master Quality Recording
Yamaha's Audio Master Quality Recording is intended for maximum compatibility audio CDs, but is only available on some models, notably the CRW3200 series[1] and the F1 series[2].
It uses a Disc At Once method with a fixed linear recording speed of 1.4 m/s, burning longer, sharper pits and lands. Since the pits and lands are longer, the quantity of information that can fit on a disc is less than with a normal method: 63 minutes instead of 74 minutes on a 650meg CD, and 68 minutes instead of 80 minutes on a 700meg CD.
The main advantage of this recording mode is an easier to read audio CD. According to a reviewer, the sound quality is noticeably better.[3]
See also
Categories:- Optical disc authoring
- Computer storage media
Wikimedia Foundation. 2010.
