Datasheet

A floppy disk controller datasheet.

A datasheet, data sheet, or spec sheet is a document summarizing the performance and other technical characteristics of a product, machine, component (e.g. an electronic component), material, a subsystem (e.g. a power supply) or software in sufficient detail to be used by a design engineer to integrate the component into a system. Typically, a datasheet is created by the component/subsystem/software manufacturer and begins with an introductory page describing the rest of the document, followed by listings of specific characteristics, with further information on the connectivity of the devices. In cases where there is relevant source code to include, it is usually attached near the end of the document or separated into another file.

Depending on the specific purpose, a data sheet may offer an average value, a typical value, a typical range, engineering tolerances,or a nominal value. The type and source of data are usually stated on the data sheet.

A data sheet is usually used for technical communication to describe technical characteristics of an item or product. It can be published by the manufacturer to help people choose products or to help use the products. By contrast, a technical specification is an explicit set of requirements to be satisfied by a material, product, or service.

An electonic datasheet specifies characteristics in a formal structure that allows the information to be processed by a machine. Such machine readable descriptions can facilitate information retrieval, display, design, testing, interfacing, verification, and system discovery. Examples include transducer electronic data sheets for describing sensor characteristics, and Electonic device descriptions in CANopen or descriptions in markup languages, such as SensorML.

Typical electronics datasheet information

Examples include:

Electronics component

A typical datasheet for an electronic component contains most of the following information:

• manufacturer's name
• product number and name
• list of available package formats (with images) and ordering codes
• notable device properties
• short functional description
• pin connection diagram
• absolute minimum, maximum ratings (supply voltage, power consumption, input currents, temperatures for storage, operating, soldering, etc)
• recommended operating conditions (as absolute minimum, maximum ratings)
• DC specifications (various temperatures, supply voltages, input currents, etc.)
• AC specifications (various temperatures, supply voltages, frequencies, etc.)
• input/output wave shape diagram
• timing diagram
• physical details showing minimum/typical/maximum dimensions, contact locations and sizes
• test circuit
• ordering codes for differing packages and performance criteria
• liability disclaimer regarding device use in certain environments such as nuclear power plants and life support systems
• application recommendations, such as required filter capacitors, circuit board layout, etc.
• errata, often published prior to subsequent correction and relevant datasheet revision

Personal computer

• Number of ports
  • USB, Ethernet, FireWire, S/PDIF, PS/2, Serial, Parallel
• Expansion bays
  • 5.25 inch bays
  • 3.5 inch bays
• Motherboard
  • CPU socket
    • Front-side bus (FSB)
    • Back-side bus (BSB)
  • Chipset
    • North bridge
    • South bridge
  • Random-access memory (RAM) slots
  • Peripheral Component Interconnect (PCI) and PCI Express (PCIe) buses and slots
  • Floppy, ATA (IDE) and SATA interfaces
  • Fans and temperature monitoring
  • Integrated graphics controllers
  • Integrated LAN interfaces
  • Firmware (BIOS)
  • Form factor
• Graphics card
  • AGP type
  • Memory
• Audio card
• Hardware compatibility requirements and basic setup details for computer device drivers
• Operating system and other installed software (if included)

A datasheet may include a "typical use" circuit diagram, as well as programming examples in the case of programmable devices. However, this sort of information is often published in a separate application note, with a high level of detail.

Historically, datasheets were typically available in a databook containing many data sheets, usually grouped by manufacturer or general type. Today, they are also available through the Internet in table form or via downloadable (usually PDF) documents.

Application notes

An application note is a document that gives more specific details on using a component in a specific application, or relating to a particular process, e.g. the physical assembly of a product containing the component. Application notes are especially useful for giving guidance on more unusual uses of a particular component, which would be irrelevant to many readers of the more widely read datasheet.

Application notes may either be appended to a datasheet, or presented as a separate document.

Chemical data sheets

Material Safety Data Sheets

A Material Safety Data Sheet, or MSDS, is a technical data sheet summarizing information about material identification; hazardous ingredients; health, physical, and fire hazards; first aid; chemical reactivities and incompatibilities; spill, leak, and disposal procedures; and protective measures required for safe handling and storage. These are required by agencies such as OSHA in its Hazard Communication Standard, 29 C.F.R. 1910.1200.

Chemical data

Data sheets and pages are available for specific properties of chemicals in Chemical elements data references: example, Melting points of the elements (data page). Specific materials have techncial data in individual sheets such as Ethanol (data page): this includes subjects such as structure and properties, thermodynamic properties, spectral data, vapor pressure, etc. Other chemical data sheets are available from individual producers of chemicals, often on their web pages.

Data sheets for automobiles

Data sheets for automobiles may be described under several names such as features, specs, engineering data, technical summary, etc. They help communicate the technical information about a car to potential buyers and are useful for comparisons with similar cars. They might include: critical inside and outside dimensions, weight, fuel efficiency, engine and drive train, towing capability, safety features and options, warranty, etc.

Other data sheets

Data sheets are common with a wide range of materials, components, machinery, structures, systems, etc.

See also

• Personal computer
• Specification (technical standard)
• Transducer electronic data sheet

External links

• Application Notes and Data Sheets at the Open Directory Project