Color grading

Color grading

Color grading or colour painting, is the process of altering and enhancing the color of a motion picture, video image, or still image either electronically, photo-chemically or digitally. The photo-chemical process is also referred to as color timing and is typically performed at a photographic laboratory. Modern color correction, whether for theatrical film, video distribution, or print is generally done digitally in a color suite. Considering such achievements in digital imaging, the artist has the ability to "paint" the image, thus the names "colorist" or "color painter" have become most applicable.

Contents

Telecine

With the advent of television, broadcasters quickly realized the limitations of live television broadcasts and they turned to broadcasting feature films from release prints directly from a telecine. This was in the days before 1956 when Ampex introduced the first Quadruplex videotape recorder (VTR) VRX-1000. Live television shows could also be recorded to film and aired at different times in different time zones by filming a video monitor. The heart of this system was the kinescope, a device for recording a television broadcast to film.[1]

The early telecine hardware was the "film chain" for broadcasting from film and utilized a film projector connected to a video camera. As explained by Jay Holben in American Cinematographer Magazine, "The telecine didn't truly become a viable post-production tool until it was given the ability to perform color correction on a video signal."[2]

Today, telecine is synonymous with color timing as tools and technologies have advanced to make color timing (color correction) ubiquitous in a video environment.

How telecine coloring works

In a Cathode-ray tube (CRT) system, an electron beam is projected at a phosphor-coated envelope, producing a beam of light the size of a single pixel. This beam is then scanned across a film frame from left to right, capturing the "vertical" frame information. Horizontal scanning of the frame is then accomplished as the film moves past the CRT's beam. Once this photon beam passes through the film frame, it encounters a series of dichroic mirrors which separate the image into its primary red, green and blue components. From there, each individual beam is then reflected on to a photomultiplier tube (PMT), where the photons are converted into an electronic signal to be recorded to tape.

In a charge-coupled device-(CCD) telecine, a “white” light is shone through the exposed film image into a prism, which separates out the image into the three primary colors, red, green and blue. Each beam of colored light is then projected at a different CCD, one for each color. The CCD converts the light into electrical impulses which the telecine electronics modulate into a video signal which can then be color-graded for use.

Early color correction on CRT Rank Cintel MkIII telecine systems was accomplished by varying the primary gain voltages on each of the three photomultiplier tubes to vary the output of red, green and blue, respectively. Further advancements converted much of the color-processing equipment from analog to digital and then, with the next-generation telecine, the Ursa, the coloring process was completely digital in 4:2:2 color space. The Ursa Gold brought about full 4:4:4 color space.[2]

Color correction control systems started with the Rank Cintel TOPSY (Telecine Operations Programming SYstem) in 1978.[1] In 1984 Da Vinci Systems introduced their first color corrector, a computer-controlled interface that would manipulate the color voltages on the Rank Cintel MkIII systems. Since then, technology has improved to give extraordinary power to the digital colorist. Today there are many companies making color correction control interfaces including Da Vinci Systems,Pandora_International Pogle and more.

Some of the main functions of electronic (digital) color grading:[1]

  • Reproduce accurately what was shot
  • Compensate for variations in the material (i.e. film errors, white balance, varying lighting conditions)
  • Optimize transfer for use of special effects
  • Establish a desired 'look'
  • Enhance and/or alter the mood of a scene — the visual equivalent to the musical accompaniment of a film; compare also film tinting.

Note that some of these functions are contrary to others. For example, color grading is often done to ensure that the recorded colors match those of the set design. In music videos however, the goal may instead be to establish a stylized look.

Traditionally, color grading was done towards technical goals. For example, in the film Marianne, grading was used so that night scenes could be filmed more cheaply in daylight. Features like secondary color correction were originally used to establish color continuity. The trend today is increasingly moving towards creative goals - improving the aesthetics of an image, establishing stylized looks, and setting the mood of a scene through color. Because of this trend, some colorists suggest the phrase "color enhancement" over "color correction".

Primary and secondary color correction

Primary color correction affects the whole image utilizing control over intensities of red, green, blue, gamma (mid tones), shadows (blacks) and highlights (whites) of the entire frame. Secondary correction is based on the same types of processing used for Chroma Keying to isolate a range of color, saturation and brightness values to bring about alterations in luminance, saturation and hue in only that range, while having a minimal or usually no effect on the remainder of the color spectrum.[1] Using digital grading, objects and color ranges within the scene can be isolated with precision and adjusted. Color tints can be manipulated and visual treatments pushed to extremes not physically possible with laboratory processing. With these advancements, the color correction process became increasingly similar to well-established digital painting techniques, and ushered forth a new era of digital cinematography.

Masks, Mattes, Power Windows

The evolution of digital color correction tools advanced to the point where the colorist could use geometric shapes (like mattes or masks in photo software such as Photoshop) to isolate color adjustments to specific areas of an image. These tools can highlight a wall in the background and color only that wall — leaving the rest of the frame alone — or color everything but that wall. Subsequent color correctors (typically software-based) have the ability to use spline-based shapes for even greater control over isolating color adjustments. Color keying is also used for isolating areas to adjust.

Inside and outside of area-based isolations, digital filtration can be applied to soften, sharpen or mimic the effects of traditional glass photographic filters in nearly infinite degrees.

Motion Tracking

When trying to isolate a color adjustment on a moving subject, the colorist traditionally would have needed to manually move the mask to follow the subject. In its most simple form, motion tracking automates this time-consuming process using algorithms to evaluate the motion of a group of pixels. These techniques are generally derived from match moving techniques used in special effects and compositing work.

Motion tracking can be combined with other techniques to add light to a subject's eyes or achieve the final look wanted for a scene. This not only saves time on the set (and money) but, when done in close collaboration with the cinematographer, allows greater flexibility in adjusting the overall feeling of the scene.

DI

The evolution of the telecine device into film scanning allowed the digital information gathered from a film negative to be of sufficient resolution to transfer back to film. In the late 1990s, the films Pleasantville and O Brother, Where Art Thou? advanced the technology to the point that the creation of a digital intermediate was possible, which greatly expanded the capabilities of the digital telecine colorist in a traditionally film-oriented world. Today, many feature films go through the DI process, while manipulation through photochemical processing is decreasing in use.

In Hollywood, O Brother, Where Art Thou? was the first film to be wholly digitally graded. The negative was scanned with a Spirit DataCine at 2K resolution, then colors were digitally fine-tuned using a Pandora MegaDef color corrector on a Virtual DataCine‎. The process took several weeks, and the resulting digital master was output to film again with a Kodak laser recorder to create a master internegative.

Hardware-based versus software-based systems

Hardware-based systems (da Vinci 2K, Pandora, etc.) have historically offered better performance and a smaller feature set than software-based systems (i.e. Apple's Color (previously Silicon Color Final Touch), ASSIMILATE SCRATCH, IRIDAS SpeedGrade, SGO Mistika, etc.). While hardware-based systems always offer real-time performance, software-based systems need to render as the complexity of the color grading increases. On the other hand, software-based systems tend to have more features such as spline-based windows/masks and advanced motion tracking.

The line between hardware and software is blurring as many software-based color correctors (e.g.Pablo [1], Mistika, SCRATCH [2], Autodesk Lustre, Digital Vision Film Master and Filmlight Baselight) use multi processor workstations and a GPU (graphics processing unit) as a means of hardware acceleration. As well, some newer software-based systems use specialized hardware to improve performance (e.g. da Vinci Resolve). Some color grading software like Synthetic Aperture's Color Finesse runs solely as a software based and will even run on low-end computer systems.

Hardware

The control panels are placed in a color suite for the colorist to operate.

  • For high-end systems many[citation needed] telecines are controlled by a Da Vinci Systems color corrector 2k or 2k Plus, which is also called color grading.
  • Other high-end systems are controlled by Pandora Int.'s Pogle, often with either a MegaDEF, Pixi, or Revolution color grading system.
  • Additionally, color grading systems require an edit controller. The edit controller controls the telecine and a VTR(s) or other recording/playback devices to ensure frame accurate film frame editing. There are a number of systems which can be used for edit control. Some color grading products such as Pandora Int.'s Pogle have a built in edit controller. Otherwise, a separate device such as Da Vinci Systems' TLC edit controller would be used.
  • Older systems are: Renaissance, Classic analog, Da Vinci Systems's: The Whiz (1982) and 888; The Corporate Communications's System 60XL (1982–1989) and Copernicus-Sunburst; Bosch Fernseh's FRP-60 (1983–1989); Dubner (1978-1985?), Cintel's TOPSY (1978), Amigo (1983), and ARCAS (1992) systems. All of these older systems work only with standard-definition 525 and 625 video signals, and are considered near obsolete today.

Software

The controls are shown on-screen and are sometimes accessed as plugin in a host application.

  • Software like Synthetic Aperture's Color Finesse runs as a plugin in host applications like Apple's Final Cut Pro, Adobe's After Effects and Premiere.
  • Magic Bullet Colorista II [3] from Red Giant Software offers multi-step color correction with primary, secondary and master stages inside host applications including Apple's Final Cut Pro, Adobe's After Effects and Premiere.
  • The Grading Sweet is a package of specialized Color Grading plugins for Apple's Final Cut Pro, designed by a cinematographer.
  • Sony Vegas has many filters that can provide professional quality color grading.
  • Apple Final Cut Studio 2 Contains Apple Color [4] which is a dedicated software application for color grading.
  • Bones Dailies by Digital Film Technology
  • Other programs have their own color grading options (for example Edius, in which there is a "Color Correction" video effect - with it, you can do a "day to night*" effect (turning footage shot during the day to look like it was shot during the night).
  • Autodesk Lustre is another high-end color grading solution. It features GPU acceleration for most functions.
  • Mistika (SGO) is a powerful color grading suite.
  • Baselight from FilmLight is often used for Stereo3D and 4K color grading because of its powerful cluster architecture.

See also

References

  1. ^ a b c d Kallenberger, Richard H., Cvjetnicanin, George D. (1994). Film into Video: A Guide to Merging the Technologies. Focal Press. ISBN 0-240-80215-2
  2. ^ a b Holben, Jay (May 1999). "From Film to Tape" American Cinematographer Magazine, pp. 108-122.

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Color grading — PP The process of altering or enhancing the color of an image to seamlessly blend cuts together in a scene, remove unintended mistakes (e.g. overexposure of highlights) or for creative effect. Also known as color correction or color timing for… …   Audio and video glossary

  • Color suite — also called a Color bay or a Telecine suite or Color correction bay. Color suite is the control room for color grading video in a post production environment. The video source could be from: a telecine, a Video tape recorder (VTR), a motion… …   Wikipedia

  • Color (software) — Color Developer(s) Apple Inc. Stable release 1.5.2 / March 24, 2010; 19 months ago (2010 03 24) Operating system Mac OS X …   Wikipedia

  • Color en los diamantes — Grupo de diamantes con colores parecidos. Un diamante químicamente puro y cristalográficamente perfecto es perfectamente transparente, sin ningún matiz ni color. Sin embargo, en realidad casi ningún diamante natural es absolutamente perfecto. El… …   Wikipedia Español

  • Color temperature — The CIE 1931 x,y chromaticity space, also showing the chromaticities of black body light sources of various temperatures (Planckian locus), and lines of constant correlated color temperature. Color temperature is a characteristic of visible light …   Wikipedia

  • Color balance — This article is about the process applied to still images. For the equivalent process applied to video, see Color grading. The left half shows the photo as it came from the digital camera. The right half shows the photo adjusted to make a gray… …   Wikipedia

  • Color (disambiguation) — For usage of colour in templates and Wikipedia pages, see Wikipedia:Color. Color is the visual perceptual property corresponding in humans to the categories called red, yellow, white, etc. Color or colour may also refer to: Contents 1 Science …   Wikipedia

  • Color correction — This article is about color correction using lighting and camera filters. For video color correction in post production, see Color grading. For color correction of still images in post production, see Color balance. For mutual color correction of …   Wikipedia

  • Color timing — PP See color grading …   Audio and video glossary

  • Grading — F/A/V The process of selecting the printing values for color and density fo successive scenes in a complete film to produce the desire visual effects. (Laboratory) …   Audio and video glossary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”