On-base plus slugging

On-base plus slugging

On-base plus slugging (OPS) is a sabermetric baseball statistic calculated as the sum of a player's on-base percentage and slugging percentage.[1] The ability of a player to both get on base and to hit for power, two important hitting skills, are represented. An OPS of .900 or higher in Major League Baseball puts the player in the upper echelon of hitters. Typically, the league leader in OPS will score near, and sometimes above, the 1.000 mark.

Contents

Formula

The basic formula is

OPS = OBP + SLG \,

where OBP is on-base percentage and SLG is slugging average. These averages are defined

SLG = \frac{TB} {AB}

and

OBP = \frac{H+BB+HBP} {AB+BB+SF+HBP}

where:

Although OBP and SLG have different denominators, it is possible to rewrite the expression for OPS using a common denominator. This expression is mathematically identical to the simple sum of OBP and SLG:

OPS = \frac{AB*(H+BB+HBP)+TB*(AB+BB+SF+HBP)}{AB*(AB+BB+SF+HBP)}

Interpretation of OPS

Unlike many other statistics, a player's OPS does not have a simple intrinsic meaning, despite its usefulness as a comparative statistic.

One fault of OPS is that it weighs on-base average and slugging percentage equally, although on-base average correlates better with scoring runs.[2] Statistics such as wOBA build on this distinction using linear weights, avoiding OPS' flaws. Magnifying this fault is that the numerical parts of OPS are not themselves typically equal (league-average slugging percentages are usually 75-100 points higher than league-average on-base percentages). As a point of reference, the OPS for all of Major League Baseball in 2008 was .749.[3]

An OPS Scale

Bill James, in his essay titled "The 96 Families of Hitters"[4] uses seven different categories for classification by OPS:

Category Classification OPS Range
A Great .9000 and Higher
B Moderate .8333 to .8999
C Above Average .7667 to .8333
D Average .7000 to .7666
E Below Average .6334 to .6999
F Terrible .5667 to .6333
G Atrocious .5666 and Lower

This effectively transforms OPS into a 7 point Likert Scale. Substituting typical Likert scale quality values such as Excellent (A), Very Good (B), Good (C), Average (D), Fair (E), Poor (F) and Very Poor (G) for the A-G categories creates a subjective reference for OPS values.

History

On-base plus slugging was first popularized in 1984 by John Thorn and Pete Palmer's book, The Hidden Game of Baseball.[5] The New York Times then began carrying the leaders in this statistic in its weekly "By the Numbers" box, a feature that continued for four years. Baseball journalist Peter Gammons used and evangelized the statistics, and other writers and broadcasters picked it up. The popularity of OPS gradually spread, and by 2004 it began appearing on Topps baseball cards.[6]

Leaders

The Top 10 Major League Baseball players in lifetime OPS, with at least 3,000 plate appearances through 2011 are (active players in bold):

  1. Babe Ruth, 1.1638
  2. Ted Williams, 1.1155
  3. Lou Gehrig, 1.0798
  4. Barry Bonds, 1.0512
  5. Jimmie Foxx, 1.0376
  6. Albert Pujols, 1.0372
  7. Hank Greenberg, 1.0169
  8. Rogers Hornsby, 1.0103
  9. Manny Ramírez, 0.9970
  10. Mark McGwire, 0.9823

The top ten is divided evenly between left-handed and right-handed batters, but the top four were all lefties. Jimmie Foxx has the highest career OPS for a right-handed batter.

Source: Baseball-Reference.com - Career Leaders & Records for OPS


The Top 10 single-season performances in MLB are (all left-handed hitters):

  1. Barry Bonds, 1.4217 (2004)
  2. Babe Ruth, 1.3818 (1920)
  3. Barry Bonds, 1.3807 (2002)
  4. Barry Bonds, 1.3785 (2001)
  5. Babe Ruth, 1.3586 (1921)
  6. Babe Ruth, 1.3089 (1923)
  7. Ted Williams, 1.2875 (1941)
  8. Barry Bonds, 1.2778 (2003)
  9. Babe Ruth, 1.2582 (1927)
  10. Ted Williams, 1.2566 (1957)

The highest single-season mark for a right-handed hitter was 1.2449 by Rogers Hornsby in (1925), (13th on the all-time list). Since 1925, the highest single-season OPS for a right-hander is 1.2224 by Mark McGwire in (1998), which is good for 16th all-time.

Source: Baseball-Reference.com - Single-Season Records for OPS

Adjusted OPS (OPS+)

OPS+, Adjusted OPS, is a closely related statistic. OPS+ is OPS adjusted for the park and the league in which the player played, but not for fielding position. An OPS+ of 100 is defined to be the league average. An OPS+ of 150 or more is excellent and 125 very good, while an OPS+ of 75 or below is poor.

The basic formula for OPS+ is

OPS+ = 100 * (\frac{OBP} {*lgOBP} + \frac{SLG} {*lgSLG} - 1)

where *lgOBP is the park adjusted OBP of the league (not counting pitchers hitting) and *lgSLG is the park adjusted SLG of the league.

A common misconception is that OPS+ closely matches the ratio of a player's OPS to that of the league. In fact, due to the additive nature of the two components in OPS+, a player with an OBP and SLG both 50% better than league average in those metrics will have an OPS+ of 200 (twice the league average OPS+) while still having an OPS that is only 50% better than the average OPS of the league.

Leaders in OPS+

Through 2011, the career leaders in OPS+ (minimum 3,000 plate appearances, active players in bold) were

  1. Babe Ruth, 206
  2. Ted Williams, 190
  3. Barry Bonds, 181
  4. Lou Gehrig, 178
  5. Rogers Hornsby, 175
  6. Mickey Mantle, 172
  7. Dan Brouthers, 170
  7. Albert Pujols, 170
  9. Joe Jackson, 169
10. Ty Cobb, 168
11. Jimmie Foxx, 163

Source: Baseball-Reference.com - Career Leaders & Records for Adjusted OPS+, as of September 28, 2011.

The only purely right-handed batters to appear on this list are Hornsby, Pujols, and Foxx. Mantle is the only switch-hitter in the group.

The highest single-season performances were:

  1. Barry Bonds, 268 (2002)
  2. Barry Bonds, 263 (2004)
  3. Barry Bonds, 259 (2001)
  4. Fred Dunlap, 258 (1884) *
  5. Babe Ruth, 256 (1920)
  6. Babe Ruth, 239 (1921)
  7. Babe Ruth, 239 (1923)
  8. Ted Williams, 235 (1941)
  9. Ted Williams, 233 (1957)
  10. Ross Barnes, 231 (1876) **
  11. Barry Bonds, 231 (2003)

Source: Baseball-Reference.com - Single-Season Leaders & Records for Adjusted OPS+

* - Fred Dunlap's historic 1884 season came in the Union Association, which some baseball experts consider not to be a true major league

** - Ross Barnes may have been aided by a rule that made a bunt fair if it first rolled in fair territory. He did not play nearly so well when this rule was removed, although injuries may have been mostly to blame, as his fielding statistics similarly declined.

If Dunlap's and Barnes' seasons were to be eliminated from the list, two other Ruth seasons (1926 and 1927) would be on the list. This would also eliminate the only right-handed batter in the list, Barnes.

See also

Notes

  1. ^ See www.baseballprospectus.com or rec.sport.baseball.
  2. ^ Lewis, Michael. Moneyball: The Art of Winning an Unfair Game, 2003.
  3. ^ http://www.baseball-reference.com/leagues/MLB/2008-standard-batting.shtml
  4. ^ James, Bill. The 96 Families of Hitters. The Bill James Gold Mine, 2009, p.24.
  5. ^ John Thorn and Pete Palmer, The Hidden Game of Baseball, pp. 69-70.
  6. ^ Alan Schwarz, The Numbers Game, pp. 165, 233.

References

  • Thorn, John; Pete Palmer (1984). The Hidden Game of Baseball. Doubleday & Company. ISBN 0-385-18283-X. 
  • Schwarz, Alan (2004). The Numbers Game. Thomas Dunne Books. ISBN 0-312-32222-4. 

Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • List of Major League Baseball players with a .900 on-base plus slugging — Below is the list of 65 Major League Baseball players who have reached the .900 on base plus slugging milestone.*Notes:Minimum of 3,000 at bat appearances :Bold denotes active player :Includes games through September 30, 2008 ee also related… …   Wikipedia

  • on-base plus slugging — noun A metric used to evaluate the effectiveness of a hitter; the sum of on base percentage and slugging percentage …   Wiktionary

  • Slugging percentage — In baseball statistics, slugging percentage (abbreviated SLG) is a popular measure of the power of a hitter. It is calculated as total bases divided by at bats:SLG = frac{(mathit{1B}) + (2 imes mathit{2B}) + (3 imes mathit{3B}) + (4 imes… …   Wikipedia

  • Base on balls — A base on balls (BB) is credited to a batter and against a pitcher in baseball statistics when a batter receives four pitches that the umpire calls balls . It is better known as a walk. The base on balls is defined in Section 2.00 of baseball s… …   Wikipedia

  • On-base percentage — In baseball statistics, on base percentage (OBP) (sometimes referred to as on base average [OBA], as the statistic is rarely presented as a true percentage) is a measure of how often a batter reaches base for any reason other than a fielding… …   Wikipedia

  • Stolen base — The all time stolen base leader, Rickey Henderson, swipes third in 1988. In baseball, a stolen base occurs when a baserunner successfully advances to the next base while the pitcher is delivering the ball to home plate. In baseball statistics,… …   Wikipedia

  • List of Major League Baseball players with a .500 slugging percentage — Below is the list of 100 Major League Baseball players who have a career .500 slugging percentage.*Notes:Minimum of 3,000 at bat appearances :Bold denotes active player :Includes games through September 30, 2008 ee also related lists*Baseball… …   Wikipedia

  • Top 100 MLB leaders in base on balls (walks) — On July 4, 2004, Barry Bonds drew his 2,191st base on balls to pass the career record of Rickey Henderson, who retired in 2003.The following table lists the top 100 career base on balls leaders. Bold denotes active players. Totals are current… …   Wikipedia

  • List of Major League Baseball players with a .400 on-base percentage — Below is the list of 58 Major League Baseball players who have reached the .400 on base percentage milestone.*Notes:Minimum of 3,000 at bat appearances :Bold denotes active player :Includes games through September 29, 2008 ee also related… …   Wikipedia

  • Walks plus hits per inning pitched — In baseball statistics, Walks plus hits per inning pitched (WHIP) is a sabermetric measurement of the number of baserunners a pitcher has allowed per inning pitched. It is a general measure of a pitcher s ability to prevent batters from reaching… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”