Computer-aided maintenance

Computer-aided maintenance

Computer-aided maintenance (not to be confused with CAM which usually stands for Computer Aided Manufacturing) refers to systems that utilize software to organize planning, scheduling and support of maintenance and repair. A common application of such systems is the maintenance of computers, either hardware or software, themselves. It can also apply to the maintenance of other complex systems that require periodic maintenance, such as reminding operators that preventive maintenance is due or even predicting when such maintenance should be performed based on recorded past experience.

Contents

Computer aided configuration

The first computer-aided maintenance software came from DEC in the 1980s to configure VAX computers. The software was built using the techniques of artificial intelligence expert systems, because the problem of configuring a VAX required expert knowledge. During the research, the software was called R1 and was renamed XCON when placed in service. Fundamentally, XCON was a rule-based configuration database written as an expert system using forward chaining rules. As one of the first expert systems to be pressed into commercial service it created high expectations, which did not materialize, as DEC lost commercial pre-eminence. [1]

Help Desk software

Help desks frequently use help desk software that captures symptoms of a bug and relates them to fixes, in a fix database. One of the problems with this approach is that the understanding of the problem is embodied in a non-human way, so that solutions are not unified.

Strategies for finding fixes

  1. The bubble-up strategy simply records pairs of symptoms and fixes. The most frequent set of pairs is then presented as a tentative solution, which is then attempted. If the fix works, that fact is further recorded, along with the configuration of the presenting system, into a solutions database.
  2. Oddly enough, shutting down and booting up again manages to 'fix,' or at least 'mask,' a bug in many computer-based systems; thus reboot is the remedy for distressingly many symptoms in a 'fix database.' The reason a reboot often works is that it causes the RAM to be flushed. However, typically the same set of actions are likely to create the same result demonstrating a need to refine the "startup" applications (which launch into memory) or install the latest fix/patch of the offending application.
  3. Currently, most expertise in finding fixes lies in human domain experts, who simply sit at a replica of the computer-based system, and who then 'talk through' the problem with the client to duplicate the problem, and then relate the fix.

References

  1. ^ Virginia E. Barker and Dennis E. O'Connor. Expert systems for configuration at Digital: XCON and beyond. Communications of the ACM, 32(3):298--318, March 1989.

Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Computer-aided — or computer assisted is a prefix that hints to the use of a computer as an indispensable tool in a certain field, usually derived from more traditional fields of science and engineering. Instead of the prefix computer aided or computer assisted,… …   Wikipedia

  • Computer-aided lean management — Computer aided lean management, in business management, is a methodology of developing and using software controlled, lean systems integration. Its goal is to drive innovation towards cost and cycle time savings. It attempts to create an… …   Wikipedia

  • Computer aided facility management — (CAFM) is the support of facilities management by information technology. The supply of information about the facilities is the center of attention. The tools of the CAFM are called CAFM software, CAFM applications or CAFM systems. Enterprise… …   Wikipedia

  • Computer-aided facility management — (CAFM) is the support of facility management by information technology. The supply of information about the facilities is the center of attention. The tools of the CAFM are called CAFM software, CAFM applications or CAFM systems. Contents 1… …   Wikipedia

  • Computer aided facility management — (CAFM) информационная система управления Фэсилити Менеджмент. Относится к корпоративным информационным системам предприятий и организаций. По своём функциям имеет много общего с системами типа EAM (Enterprise Asset Management, система управления… …   Википедия

  • Computer-aided software engineering — Example of a CASE tool. Computer aided software engineering (CASE) is the scientific application of a set of tools and methods to a software system which is meant to result in high quality, defect free, and maintainable software products.[1] It… …   Wikipedia

  • Computer-aided dispatch — The CAD system of a fire department on a busy day. The line at the bottom is about to be dispatched. (Note:addresses have been changed for privacy reasons.) Computer assisted dispatch, also called Computer Aided Dispatch (CAD), is a method of… …   Wikipedia

  • List of computer-aided design editors — Advanced 3D CAD software allows users to create complex 3D forms This page compares computer aided design (CAD) software that engineers and architects use to create drawings for the fields of architecture, engineering and construction (AEC) in… …   Wikipedia

  • computer science — computer scientist. the science that deals with the theory and methods of processing information in digital computers, the design of computer hardware and software, and the applications of computers. [1970 75] * * * Study of computers, their… …   Universalium

  • Computer-assisted gaming — (CAG) and computer asssited wargaming (CAWG) refer to games which are at least partially computerized, but where on important part of the action is not virtual but performed in real life or on a miniature terrain. Regulation of the game can be… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”